"No-backflow" design, ensure a clean, strong blast of air, a safe and perfect cleaning solution for your digital SLR, lenses, filter and other sensitive electronic equipments. To learn more about this air blower, please to see a short video on https://youtu.be/nZp4mr3qEGc | Silicone soft cap tip to prevent accidental damage to your gear | Single-way air valves at both air intake and outtake ensure clean air blown out | Dust free air blower, filter at the intake of the blower prevents the introduction of everyday dust, quartz, and sand debris with diameter over 21 microns | Package includes: 1 x Silicone Blower, 3 x Replaceable Filters, 1 x Plastic Spanner Wrench, 1 x Manual

This white balance filter is individually assembled, calibrated and certified for neutrality in the visible spectrum, and for 18% light transmission | It allows digital photographers to quickly and easily set an accurate custom white balance | It can be used on-the-fly to set a white balance in-camera when shooting JPEG, or later in post production when shooting RAW | Using this white balance filter to set a custom white balance results in consistently balanced color and eliminates many of the yellow, red and blue color casts commonly seen in digital photography | The white balance filter eliminates many of the inconsistencies and inconveniences associated with using white balance cards and targets, including unwieldy size, unwanted reflectivity, improper angling, and shadows

Replaces Canon ES-71II lens hood, fits Canon EF 50mm f/1.4 USM (only) | Blocks stray light from entering the lens, no vignetting would show with the hood on | Not impact the use of filters and lens caps, reversible for compact storage | Non-glare matte finish prevents reflections. Extra protection from accidental impact | What's in the box : Lens Hood x 1, Microfiber Cleaning Cloth X 1

Replaces Olympus LH-40B lens hood, compatible with Olympus M.Zuiko Digital 45mm f1.8 Lens | Shades the lens from stray light, improving contrast and image quality | In inclement weather, it can assist in keeping moisture or wind-blown debris off the lens | Protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles | Reversible to stay on lens

Made of high quality ABS material, reversible design allows you to mount the hood in reverse for compact storage | Minimizes flare and ghosting by blocking out stray light | Protects your lens from accidental impact and the elements | It replaces Original Nikon HB-32 Lens Hood | It fits Nikon AF-S DX 18-140mm f/3.5-5.6G ED VR Lens, Nikon AF-S DX 18-105mm f/3.5-5.6G ED VR Lens, Nikon AF-S DX 18-135mm f/3.5-5.6G ED IF Lens, Nikon AF-S DX 18-70mm f/3.5-4.5G ED IF Lens

Consists of a filter adapter and a hood part | Blocks stray light from entering the lens | Non-glare matte finish on the interior surface prevents reflections | No vignetting will be caused with the hood on | Extra protection from accidental impact; Enables mounting of 67mm filters or a 67mm lens cap

Compatible Lens 1 : Canon EF-S 18-135mm F3.5-5.6 IS USM (Does Not fit 18-135 STM) | Compatible Lens 2 : Canon RF 24-105mm F4-7.1 IS STM (Does Not fit RF 24-105mm F4) | Blocks stray light from entering the lens;Reversible for compact storage | Will not affect the use of lens cap or filter, non-glare matte finish prevents reflections | No vignetting will be caused with the hood on, extra protection from accidental impact

The part of camera mount is made of Aluminum, the part of lens mount is made of high quality brass, while the tube is made of high quality ABS plastic | Shortens minimum focusing distance of lens for macro photography, convert almost any lens into a macro lens, save your cost of buying an expensive macro lens | Full Autofocus and auto exposure Compatibility | Extension tubes of 11mm and 16mm lengths can be used individually or in combination for greater magnification | Fits Canon RF mount mirrorless camera and RF mount mirrorless lenses

Bluetooth Wireless Connection: It works from behind the camera as well as from in front, not having to be in direct line of sight to the camera like an infrared (IR) remote, so it is much more flexible and convenient than IR remote control | Wireless Range: Operating range up to 10m / 32.8ft | Nice and Handy Size: Its weight is only 18g / 0.64oz and its dimension is 110 x 31.6 x 12.7mm / 4.3" x 1.24" x 0.38" inch | Remote Available Functions: Auto focus / shutter release / locking bulb exposures / start & stop video recording / zoom in and out control (Only for Sony power zoom lenses) / adjust camera focus (lens on Manual focus mode) / send back button focus (AF-ON) as well as your C1 custom button | Necessary Paring Steps Required: Please see products photos and description below to learn how to pair this remote with your camera

Works at a radio frequency of 2.4Ghz, allows the transmitter to wirelessly control the camera or camcorder from 100 meters away. To learn how to use, please go to see a short video on https://youtu.be/m3lRZBW6BRk | For video or still use, the remote has these available modes: Power on / off, Video start / stop, Focusing / Shooting, Bulb lock, Continued shooting lock, Two-Step Zooming and Displaying grid lines | Both the transmitter and receiver are powered by 2 AAA battery (Please note that no AAA battery is included in the package) | It fits any Sony camera and camcorder with Multi Terminal, please refer to the compatible models in the below description | Package include: 1 x Transmitter, 1 x Receiver, 1 x Connecting cable for Multi Terminal, 1 x String for receiver, 1 x Manual

Wired remote control, working distance is up to 1 meter / 3.28' | For video or still use, the remote has these available modes: video start / stop, two-step zooming, focusing / shooting, bulb lock, continued shooting lock and displaying grid lines | It fits select Sony camcorder and camera with Multi Terminal or Remote Terminal, please refer to the compatible models in the below description | Replaces Sony RM-VPR1 wired remote control | Can be attached to other devices via the included clip, to learn more about this product, please see a short video here https://youtu.be/-vZiwFCfCEo

Ideal for cleaning cameras, lenses, keyboards, televisions, monitors, LCD screens, glasses, precision instruments and so forth | Made of premium silicone material, soft and elastic, non-toxic and environmental-friendly | Directs powerful streams of air to blow away debris | Ergonomic design, easy to grip and operate | For better cleaning effect, you can use it together with lens cleaning pen and m

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Comes with 2 rubber rings for tight attachment | Pure copper material with microfiber leather | Ensures a soft and comfortable finger touch at the top of your camera | Effectively reduces camera vibration | Decorates your camera and makes it look stylish and elegant

Made of premium aluminium alloy and microfiber leather - Provides a comfortable, stable and secure grip for long time usage | Accurate accesses design - Allow you to get to the camera battery without taking the grip off and you still have a standard 1/4" socket for mounting it on a tripod too | Chamfer design on the bottom - The cut outs on the bottom does not get in the way of the moving LCD or any of the camera controls | Specifically designed for Sony RX100 VII digital camera only, not for other RX100 series old models | A must have accessory for anyone with medium, large and up size hands or those who worry about dropping these compact expensive cameras with sleek body

Top of the adapter: Standard ISO hot shoe / Bottom of the adapter: Cold Shoe Foot with a 1/4"-20 tripod socket on the bottom | A PC sync connection and a 3.5mm mini phone socket on the side of the adapter | Enables you to trigger Off-camera flash or studio light via the PC sync connection port or 3.5mm mini phone connection port on the sides of the adapter with a sync cable ( Note: A sync cable is not included) | Mount this adapter to a tripod or other accessories that features a 1/4"-20 thumbscrew or standard hotshoe | Note: This adapter does not support TTL flash operation

Top of the adapter: Standard ISO hot shoe / Bottom of the adapter: Standard ISO shoe mount | A PC sync connection and a 3.5mm mini phone socket on the side of the adapter | Enables you to trigger flash attached on the top of the adapter hot shoe as well as additional flash or studio light via the PC sync connection port or 3.5mm mini phone connection port on the sides of the adapter (A sync cable is not included) | Compatible with Cameras with standard hot shoe | Note: This adapter does not support TTL flash operation

Compact Size:12.1*4.0*2.1cm, 90cm long wired remote controller, powered by 2 AAA Alkaline batteries | Self-timer, interval timer, long-exposure timer and exposure-count setting features | Take Photos without Camera Shake and great for Time-Lapse Photography | The timer can be set anywhere from 1 sec. to 99 hrs., 59 min., 59 sec | Humanized backlight design allows you to view the LCD screen in the dark

Powered by 2 AAA Alkaline batteries | Self-interval timer | Bulk mode Long-exposure timer | Exposure-count setting feature | Cable length: about 3.0 ft / 90cm. Package includes clip holder x1.

For use with most of waterproof cameras/underwater cameras/action cameras below a weight of 320g/11.2 ounces such as Olympus Stylus Series TG-6/TG-5/TG-4/TG-3/TG-2/TG-1/TG-870/TG-860/TG-850/TG-810/TG-610/TG-320/TG-310, HERO8/HERO7/HERO6/HERO5/HERO4/HERO3, Canon D30/D20/D10, Nikon W300/AW120/AW110/AW100, Fujifilm XP140/XP130/XP120/XP80/XP60/XP50/XP30,etc. | For use with most of cell phones with extra waterproof case (Note: For use with Cell Phone in the water, you have to extra buy a waterproof case as the package does not contain a waterproof case) | The circumference of wrist strap is adjustable with an max circumference of 300mm / 11.8" | Keep the camera or phone afloat and easy to find in the water | Keep your camera safe and convenient to carry when snorkeling or swimming,free your hands when not taking photos

For use with most of waterproof cameras/underwater cameras/action cameras below a weight of 320g/11.2 ounces such as Olympus Stylus Series TG-6/TG-5/TG-4/TG-3/TG-2/TG-1/TG-870/TG-860/TG-850/TG-810/TG-610/TG-320/TG-310, HERO8/HERO7/HERO6/HERO5/HERO4/HERO3, Canon D30/D20/D10, Nikon W300/AW120/AW110/AW100, Fujifilm XP140/XP130/XP120/XP80/XP60/XP50/XP30,etc. | For use with most of cell phones with extra waterproof case (Note: For use with Cell Phone in the water, you have to extra buy a waterproof case as the package does not contain a waterproof case) | The circumference of wrist strap is adjustable with an max circumference of 300mm / 11.8" | Keep the camera or phone afloat and easy to find in the water | Keep your camera safe and convenient to carry when snorkeling or swimming,free your hands when not taking photos

2 in 1 wired and wireless intervalometer, function both wired or wirelessly to better fit your particular setup | Features specialized functionality such as self-timer, continuous shooting timer, long exposures timer, interval shooting timer and number of shoots timer | Features a 2.4 GHz frequency along with a 328ft/100m range for maximum versatility and reliability | Multiple time settings can be accessed from the transmitter's backlit LCD screen, such as the ability to set a number of shots from 1-999 or to infinitely take photos. The duration of an exposure can also be set all the way up to 99 hours 59 minutes and 59 seconds in one-second increments | It is compatible with select Fujifilm cameras: Fujifilm X-T4/X-T3/X-T2/X-T1/X-T30/X-T20/X-T10/X-T100/X100V/X100F/X100T/XF10/GFX 100/GFX 50R/GFX 50S/X-H1. (For the Fujifilm X-T3 camera, please do not plug to the 3.5mm headphone or mic jack on the left side (looking from the back), you need to plug to the 2.5mm remote socket that's hidden behind a flap right above the sd slot cover on the right side (from the back)

2 in 1 wired and wireless intervalometer, function both wired or wirelessly to better fit your particular setup | Features specialized functionality such as self-timer, continuous shooting timer, long exposures timer, interval shooting timer and number of shoots timer | Features a 2.4 GHz frequency along with a 328ft/100m range for maximum versatility and reliability | Multiple time settings can be accessed from the transmitter's backlit LCD screen, such as the ability to set a number of shots from 1-999 or to infinitely take photos. The duration of an exposure can also be set all the way up to 99 hours 59 minutes and 59 seconds in one-second increments | It is compatible with Select Nikon cameras: Nikon Z7/Z6/D90/D600/D610/D750/D780/D3100/D3200/D3300/D5000/D5100/D5200/D5300/D5500/D5600/D7000/D7100/D7200/D7500/Df/Coolpix P7700/Coolpix P7800/Coolpix P1000

2 in 1 wired and wireless intervalometer, function both wired or wirelessly to better fit your particular setup | Features specialized functionality such as self-timer, continuous shooting timer, long exposures timer, interval shooting timer and number of shoots timer | Features a 2.4 GHz frequency along with a 328ft/100m range for maximum versatility and reliability | Multiple time settings can be accessed from the transmitter's backlit LCD screen, such as the ability to set a number of shots from 1-999 or to infinitely take photos. The duration of an exposure can also be set all the way up to 99 hours 59 minutes and 59 seconds in one-second increments | It is compatible with select Nikon cameras: Nikon D850/D810/D810A/D800/D800E/D700/D500/D5/D4s/D4/D3x/D3s/D3/D2H/D2Hs/D2x/D1x/D2Xs/D1H/D1/D100/D200/D300/D300s/F5/F6/F90/F90x/F100

2 in 1 wired and wireless intervalometer, function both wired or wirelessly to better fit your particular setup | Features specialized functionality such as self-timer, continuous shooting timer, long exposures timer, interval shooting timer and number of shoots timer | Features a 2.4 GHz frequency along with a 328ft/100m range for maximum versatility and reliability | Multiple time settings can be accessed from the transmitter's backlit LCD screen, such as the ability to set a number of shots from 1-999 or to infinitely take photos. The duration of an exposure can also be set all the way up to 99 hours 59 minutes and 59 seconds in one-second increments | It is compatible with select Sony cameras: Sony A6000/A6100/A6300/A6400/A6500/A6600/A3000/A3500/A5000/A5100/A58/A9/A7/A7 II/A7 III/A7R/A7R II/A7R III/A7R IV/A7S/A7S II/DSC-HX300/DSC-HX400/DSC-HX400V/DSC-HX50V/DSC-HX60V/DSC-HX90/DSC-HX90V/DSC-RX10/DSC-RX10 II/DSC-RX10 III/DSC-RX10 IV/DSC-RX100 II/DSC-RX100 III/DSC-RX100 IV/DSC-RX100 V/DSC-RX100 VA/DSC-RX100 VI/DSC-RX100 VII/DSC-RX1R II/DSC-WX500/ZV-1

16 possible radio channels, Operate on Radio Frequency 433 MHz, 1 transmitter can trigger multiple receivers | Up to 30 meters range | Can trigger cameras wireless or wired | Can wirelessly trigger the camera shutter under 5 modes: single shot, unlimited continuous shots, bulb shot, 3 continuous shots and 5 seconds delay shot | For Panasonic DMC-FZ2500,FZ2000,FZ1000,FZ1000 II,FZ300,FZ100,FZ150,FZ200,FZ20,FZ30,FZ50,G1,G2,G3,G5,G6,G7,G9,G85,GF1,GH1,GH2,GH3,GH4,GH5,GH5S,GX7,GX8, Replaces Panasonic DMW-RS1/RSL1 Remote

16 possible radio channels, Operate on Radio Frequency 433 MHz, 1 transmitter can trigger multiple receivers | Up to 30 meters (100 feet) range | Can trigger cameras wireless or wired | Can wirelessly trigger the camera shutter under 5 modes: single shot, unlimited continuous shots, bulb shot, 3 continuous shots and 5 seconds delay shot | It fits for Fuji Fujifilm X-T4 X-T3 X-T2 X-T1 X-T30 X-T20 X-T10 X-T100 X-E3 X-E2S X-E2 X-PRO3 X-PRO2 X-H1 GFX 100 GFX 50S GFX 50R X100V X100F X100T XF10 X-A5 X-A10 X70 X30 camera

Operate on Infrared(IR), Powered by a CR-2025 3V battery included | Wirelessly take photos from up to 10 meters, "S" button for instant shutter, "2S" button for 2 seconds delay shutter, "START/STOP" button for start/stop video recording | Ideal for subjects that are difficult to approach, self-portraits, or to minimizes vibrations for close-ups and time exposure | Set your camera into remote mode

Operate on Infrared(IR), Powered by a CR-2025 3V battery included | Wirelessly take photos from up to 10 meters, "S" button for instant shutter, "2S" button for 2 seconds delay shutter, "START/STOP" button for start/stop video recording | Ideal for subjects that are difficult to approach, self-portraits, or to minimizes vibrations for close-ups and time exposure | Set your camera into remote mode first before using the remote properly (Make sure your camera has infrared sensor before purchasing ) | Replaces original Sony RMT-DSLR1 & RMT-DSLR2 remote, please refer to product description for detail compatible cameras

The part of camera mount is made of Aluminum, the part of lens mount is made of high quality brass, while the tube is made of high quality ABS plastic | Shortens minimum focusing distance of lens for macro photography, convert almost any lens into a macro lens, save your cost of buying an expensive macro lens | Full Autofocus and auto exposure Compatibility | Extension tubes of 11mm and 16mm lengths can be used individually or in combination for greater magnification | Fits Nikon Z mount mirrorless camera and Z mount mirrorless lenses

【Replace ET-88B Lens Hood】:Compatible with Canon RF 600mm F11 IS STM Lens on EOS R6 EOS R5 EOS R EOS RP. | 【EASY TO USE】:Easy to install, connect the hood directly to the lens through bayonet.Allows putting on a Ф82mm filter and a Ф82mm lens cap. | 【REVERSIBLE】:The lens hood can be reversed on the lens to reduce space and facilitate storage and carrying of the camera. | 【SHOCKPROOF】:Accidental collision, which can reduce the damage of the lens, and provide extra protection for your lens.Whether shooting in the light, backlight, night, etc., can effectively reduce the effect of stray light on the image, improve clarity. | 【MATERIAL】:Made of high quality ABS material, Light and Durable.

【Replace ET-101 Lens Hood】:Compatible with Canon RF 800mm F11 IS STM Lens on EOS R6 EOS R5 EOS R EOS RP EOS Ra. camera | 【EASY TO USE】:Easy to install, connect the hood directly to the lens through bayonet.Allows putting on a Ф95mm filter and a Ф95mm lens cap. | 【REVERSIBLE】:The lens hood can be reversed on the lens to reduce space and facilitate storage and carrying of the camera. | 【SHOCKPROOF】:Accidental collision, which can reduce the damage of the lens, and provide extra protection for your lens.Whether shooting in the light, backlight, night, etc., can effectively reduce the effect of stray light on the image, improve clarity. | 【MATERIAL】:Made of high quality ABS material, Light and Durable.