Note:
1. Low-cut design to reduce wind noise outdoors, but may reduce low frequency sound effects as well;
2. When sensitivity switch to +10 dB, it will enhance the sound effects, but may increase the noise as well;
3. When recording, please do not operate the switch or touch the microphone, do not move it vigorously, otherwise, the noise will be recorded;
4. When recording, keep the microphone switch vertical to the ground to ensure pickup heart-shaped for better sound effects;
5. When use and storage, please be careful to avoid wet, electrostatic, magnetic, hot or cold, which will affect the life of the product and the use effect.

Usage:
1. Remove the microphone from the shock absorber, rotate and open the rear, install one AA-1.5V fully charged battery according to the positive and negative prompts;
2. Install the microphone back to the shock absorber, attach to the camera hot shoe and adjust the microphone length according to the length of the lens;
3. Insert the plug properly into MIC hole of camera or DV;
4. Turn on the microphone first, and then the camera / DV power, set in video mode to start work;
5. When recording, keep the microphone switch vertical to the ground, do not adjust the switch during working;
6. After use, turn off the power, remove the battery, store the microphone in a dry place under room temperature.

Specifications:
Pickup type: Stereo electret capacitance x 2
Frequency response: 50Hz-16KHz
Sensitivity:-45dB
Enhance: +10 dB
Low-cut frequency: 60Hz 10dB (otc)
Output impedance: 500? (AT 1KHz)
SNR: 76dB
Maximum load SPL: 120dB
Battery type: AA battery
Cable length: 33cm
Plug: Gold-plated 3.5mm in diameter
Dimensions (excluding sponge): 200 x 42 x 65mm
Weight: about 120g

Package Includes:
1 x iShoot DC/DV Stereo Microphone PL-MIC02