【Run 2 IP Cameras on 1 Cable】: Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a "sender" unit and a "receiver" unit. Plug Sender unit into 2 open ports on your POE switch. Run one cable to the location that has the cameras that are nearby each other. Connect 2 short cables to the Receiver unit and connect the other ends to your camera. | 【Reduces Cabling Costs】: Lets say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch, you can now just run 1. Easy and Cost Effective. | 【Convenient for Adding Camera】: Ever installed a camera in a location, only to find out that you need another one right by it? Whats worse, the switch is on the other side of the building and it took you hours to run that one cable run. No worries! Just use this splitter set to make your installation much easier as all you need to do now is run 1 cable from the old camera to the new camera. | 【Outdoor Waterproof】: The Receiver Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. | 【Easy to Use】：Simple plug & play installation. Only works on standard POE network switches.

1 In 2 Out PoE extender: STEAMEMO PoE extender extends power and data to 2 terminal PoE device through an exterior network data cable(Cat5,Cat5e,Cat6,Cat6e,UTP cable). Delivers the correct wattage to power your PoE devices through auto-sensing(Please note: only support 48V POE devices) | 250M Extension: When the extension mode is on, the extender will be extended from 100M distance to 250M at the speed of 10Mbps.More convenient for your using(Better to use CAT5 cable or more). Connect PoE extender with NVR for powering long distance IP camera, simplified your network cabling. | Reliable Waterproof and Beautiful Appearance Design: Compact Size, Easy To Install, Support Outdoor Use, Windproof And Rainproof, The Shell Uses Uv Sunscreen And Antiseptic Materials, And The Product Has A Longer Service Life | PoE Powered: STEAMEMO PoE Extender Supports 10/100Mbps data rates, comply with IEEE 802.3af/at Standard. It can supply 2 PoE 15W ouput when powered by IEEE 802.at source. Plug and play, no additional power supply required. No external power required. | Widely Use: The extender features a convenient wall mountable design for installation flexibility, Durable and waterproof. STEAMEMO PoE Repeater with design of 4KV lightning protection can be used in outdoor harsh environment -40℃~+70℃(-40°F to 158°F). Ideal for small installations of Security Camera CCTV Surveillance, greatly extending the network signal transmission as well as power supplying distance | After-sales service: Electronic products will have various unexplained failures. We provide one-year after-sales service for renewal. Within 1 year from the order, only replacement is not repair

【4 Port Gigabit PoE Extender】With 10/100/1000Mbps speed, this 4 port PoE extender include 3 PoE out and 1 PoE in.Each PoE extender has an transmission distance of 330ft(100m), running one cable to power 3 POE IP devices. | 【IEEE 802.3 af/at】This POE Repeater complied with standard PoE Protocol, Input Max 30W, Output Max 24W, Average 8W per port. PoE Voltage 44-57 Vdc. PoE pin: Input, 1/2 (-), 3/6 (+), 4/5(+), 7/8(-); Output: 1/2 (+), 3/6 (-). | 【Plug and Play】Support plug and play,the PoE Extender is easy to setup with no software installation or configuration required. | 【Widely Application】The 4 port PoE repeater Support 3-level cascading, can connect poe AP, camera, phone and other POE devices, increase POE coverage at low cost. | 【Compact Size】Compact size (3.2"*2"*1"), supports wall mount and din-rail mount, can be installed anywhere as needed.Moreover,We committed to provide product- replace- without- repair service within 1 year, more concern on your using experience.