Allows you to run 1 cable run to the switch for 2 cameras that are near each other. Set consists of a "sender" unit and a "receiver" unit. Plug Sender unit into 2 open ports on your POE switch. Run one cable to the location that has the cameras that are nearby each other. Connect 2 short cables to the Receiver unit and connect the other ends to your camera. Done! | Reduces cabling costs. Lets say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch, you can now just run 1. Easy and Cost Effective. | Ever installed a camera in a location, only to find out that you need another one right by it? Whats worse, the switch is on the other side of the building and it took you hours to run that one cable run. No worries! Just use this splitter set to make your installation much easier as all you need to do now is run 1 cable from the old camera to the new camera. | The Receiver Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. | Simple plug n play installation. Works with all standard 802.3af/at POE switches. Also works on POE NVRs due to the new updated design with the onboard toggle switch. If your switch or NVR uses standard POE power, this unit will work!

POE POWERED MONITOR WILL DISPLAY UP TO 8 IP CAMERAS ON YOUR NETWORK - This monitor is unique in that it has a built-in decoder which will pull up to 8 IP Cameras on your local network and display them on this monitor. | POWERED BY POE (Power Over Ethernet - POE+ 30 watts required) -This entire monitor is powered from POE. No need to worry about finding a nearby receptacle or calling an expensive electrician to wire a new receptacle. Simply run up to a 330' network cable run from your POE Injector or POE Switch to this monitor and Boom, your done! POE Injector Included. | GREAT FOR PUBLIC VIEW OR SPOT MONITOR PURPOSES - Have ever needed an additional monitor that is completely separate from the main monitor that is directly connected to your NVR? Well, what you need is a Spot monitor, and this Spot Monitor is extremely convenient due to its POE Powered and Built in 8 Channel Video Decoding capabilities. It’s a great choice for any type of Secondary Monitor scenarios. | 3RD PARTY CAMERA SUPPORT. The built-in decoder will work with most all professional brand IP Cameras. The Graphical User Interface is easy to use and navigate with the included mouse. Simply click the search button in the interface and you will see all of the IP Cameras on your local network that you will be able to add and view. | VESA Compatible (mount not included), Mouse Included, 1080p Resolution, Heavy Duty Metal Shell, Built for 24/7 Operation, 21.5”, Built In Speakers, USB Power Output. 3 Year Warranty

Innovative Dual-Function POE Power Splitter: Converts incoming POE to a 12V DC output and a POE output. Unlike traditional POE splitters that only convert POE to 12V DC and pass through network traffic, the IPCamPower POE splitter not only performs these functions but also passes through POE. This unique feature allows you to power both an IP camera and an additional 12V DC device while maintaining network connectivity with speeds up to 1 Gigabit Per Second (10/100/1000). | Accepts up to 30 watts of active POE Input (802.3at standard). Outputs a maximum of 15 watts of active POE output (802.3af standard). Also Outputs a maximum of 1.2 amps of 12V DC Output. The splitter consumes a maximum of 3 watts for self operation while passing through a maximum of 27 watts to be shared between the POE output and the 12V DC Output. The strenght of your POE Injector/Switch and Cable Length Runs can cause these performance specifications to vary. | POE Network Extender: The POE output also functions as a network extender, allowing you to extend cable runs by an additional 328 feet (100 meters) to another downstream POE device. Alternatively, it can be used to daisy-chain to another IPCamPower POE Splitter, providing greater flexibility and reach for your security network. | Versatile Power Solutions: Ideal for scenarios where you need to power a POE camera along with any 12V DC device simultaneously. Examples of 12V DC devices include IR illuminators, standard white lights, horns, sirens, and strobes. These devices can be installed next to a POE-powered camera to enhance its functionality. Let your creativity flow and design a setup that meets your specific needs! | Compact and Attractive Design: Measuring just 3-1/8" inches long by 1.12 inches wide (9.25" long with cable extended), This splitter is designed for indoor use only. 1 year warranty from a USA based seller. A must have tool for any IP camera or Low Voltage Installer.