4 WOOD PLA FILAMENT BUNDLE - 4 different wood PLA filament with Walnut wood, Red wood, Bamboo and Ebony wood, each filament spool is 200g. | REAL WOOD/BAMBOO FIBER - There is 20% wood fiber in the walnut wood, red wood and ebony wood PLA Filament. The light color wood has 20% bamboo fiber. Therefore, you will get a print like a real wood with matte face and even wood smell. | REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle. | HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm. | VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage. | ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament. | Print Temp: 190-200℃ | Print Speed: 30-60mm/s, 40mm/s will be better

【Wood Pla】AMOLEN Yellow Pearwood PLA filament add more than 30% real wood fiber, which makes the printed models look like real woodwork. This wood PLA shows a dark brown or chocolate brown color, has the grainy appearance of woodwork and even smells like wood. | 【Premium Quality Filament】The Wood filament 1.75mm PLA Raw materials are from USA. Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. | 【Print Smoothly & Clog Free】AMOLEN high quality PLA Wood filament is tangle & clog free. Printing Temperature 180-200℃; Printing Bed (Optional) 0-60℃; Printing speed: 30-60mm/s; Tips: Layer Height 0.15mm. | 【High Compatibility】AMOLEN PLA Filament is perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, DO3D, MYNT3D, 3Doodler etc. NOTE: Please pass the filament through the fixed hole to avoid tangles after use. | 【Vacuum Packing & Hassle Free】Vacuum packaging with desiccant to keep it dry and keep out dust. AMOLEN is focus on innovative and better quality PLA filament.Defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service.

Fully assembled Amphenol RG213 UHF (PL-259) Male Coaxial Cable | Military-grade RG213/U 50 Ohm low-loss coax with 96% braid coverage | Impedance-matched Amphenol brand UHF connectors pre-installed | The absolute best coax for high-power handling and low-loss operation

15-Pin (DB15) Deluxe Fully Populated D-Sub Cable Assembly by Amphenol | Connectors: DB15 male to DB15 female D-Sub connectors pre-installed | Cable: 26 AWG UL listed with copper tape + aluminum Mylar shields | Straight-through wiring (i.e. pin 1 to pin 1) design per industry standards

Deluxe Shielded IEEE-488 GPIB Cable by Amphenol (HPIB Cable) | Precision-Built by the Original Inventor of the GPIB Connector: Amphenol | Single 95% Copper Braid Shield + Dual Layer Aluminum Mylar Foil Shields | Perfect Compromise Between EMI/RFI Performance and Cable Flexibility

Deluxe Shielded IEEE-488 GPIB Cable by Amphenol (HPIB Cable) | Precision-Built by the Original Inventor of the GPIB Connector: Amphenol | Single 95% Copper Braid Shield + Dual Layer Aluminum Mylar Foil Shields | Perfect Compromise Between EMI/RFI Performance and Cable Flexibility

Durable Material: ACRYLIC mirror with black frame for durable safe use, 6.69" x 2.95" rectangle convex mirror. | Heavy Duty: all metal stand, heavy clip with sponge mat to avoid scratchs on your monitor, metal stem and joint, 100% 360 degree adjustable to any view angle as you want. | Universal Use: clip-on design, could clip up to 2" desk, cabinet, cubicle, PC or attach to other items. | Purpose: see yourself or rear surrounding for safety and security, as computer mirror, cubicle mirror or desk rear view monitors. | Easy to install: just clip on, could be moved to anywhere as you want, unlike other stick-on mirror that could not move.

Heavy Duty: all metal stand, heavy clip with sponge mat to avoid scratchs on your monitor, metal stem and joint, 100% 360 degree adjustable to any view angle as you want. | Large View: 6.69" x 2.95", rectangle convex mirror, real HD glass and frameless. | Universal Use: clip-on design, could clip up to 2" desk, cabinet, cubicle, PC or attach to other items. | Purpose: see yourself or rear surrounding for safety and security, as computer mirror, cubicle mirror or desk rear view monitors. | Easy to install: just clip on, could be moved to anywhere as you want, unlike other stick-on mirror that could not move.

Durable Material: GLASS mirror with black frame for durable safe use, 6.69" x 2.95" rectangle convex mirror. | Heavy Duty: all metal stand, heavy clip with sponge mat to avoid scratchs on your monitor, metal stem and joint, 100% 360 degree adjustable to any view angle as you want. | Universal Use: clip-on design, could clip up to 2" desk, cabinet, cubicle, PC or attach to other items. | Purpose: see yourself or rear surrounding for safety and security, as computer mirror, cubicle mirror or desk rear view monitors. | Easy to install: just clip on, could be moved to anywhere as you want, unlike other stick-on mirror that could not move.

This is a package of pre-cleaned 50pc microscope blank slides and 100pc (7/8"x7/8") square cover slips | Slide size: 1" x 3" (25.4x76.2mm) | Coverslips size: 7/8" x 7/8" (22x22mm), 0.006" (0.15mm) in thickness | Material: optical glass

5 packages of pre-cleaned 72 piece clear microscope blank slides and 100 piece 22mmx22mm square glass cover slips | 72 piece pre-cleaned blank clear slides, dimensions of slides: 1" x 3" x 0.04" (25.4x76.2x1mm) | 100 piece cover slips, dimensions of coverslips: 7/8 x 7/8 x 0.006" (22x22x0.13mm) | Material: optical glass | Ground edges

This high quality dry darkfield condenser fits industry standard compound microscopes. | Darkfield Condenser: Dry | Mounting Size: 37mm, industry standard | NA: 0.7-0.9

Set of 25 prepared slides, including plants, insects, and animal tissues, for use in biological education | Samples preserved in cedar wood oil and sealed with a coverslip to preserve specimens and prevent contamination | Labeling provides specimen identification | Slides are composed of optical glass for clear viewing | Set comes in fitted wooden storage box to prevent breakage and ease handling

❤️IMPORTANCE NOTICE FOR CUSTOMERS - Automatic trash can is a bathroom motion sensor trash can, customers need to install 2 AA batteries as well as follow the steps to put on the garbage bag. After the sensor light turns on, you can wave your hand or bend your knees to open the lid. When the sensor light turns off after 5 seconds, the lid will automatically close. | ❤️PERFECT SIZE SUITABLE FOR NARROW SPACE - 9.65''L×7.28''W×13''H with 3.5 gallon capacity, durable ABS materials. Automatic motion sensor can for your bathroom is a more compact option. It's designed to be slim enough to tuck next to a toilet or sink. And its perfect size for office, living room, bathroom, dormitory room and other small places. The cover is designed to be splash-proof, so you can put it next to your sink or shower without worry. And the cover design prevents the odor from spreading out, and can keep the air in the environment clear at all times. | ❤️TOUCHLESS TRASH CAN - Our motion sensor trash can uses advanced automatic sensing technology, you only need to put your hands or knees in the sensing area (6-10 in), then the trash bin can capture your every movement within 0.3 seconds to achieve precise sensing, and finally it will automatically turns off when you leave the sensing area for 6 seconds. Such an intelligent sensor design can easily throw garbage without bending over even when you can't have a free hand. | ❤️WATERPROOF AND MOISTURE-PROOF DESIGN - Our motion sensor trash bin adopt high-quality materials and advanced design. This automatic trash can still maintain the sensitive opening and closing performance of the bucket lid in the daily wet and splashing environment, It is not afraid of water splashing, and there is no problem of touch failure. So it is very suitable for toilet, bathroom, living room, bedroom. | ❤️SILENTLY OPENING AND CLOSING - The interior of the rubbish can adopts an upgraded smart chip, which can still maintain high efficiency and long battery life under the premise of satisfying different opening and closing methods of the trash can. Anborry induction trash can cover adopts air damping technology, which can be opened and closed silently and slowly, even if you throw garbage in the middle of the night, it will not disturb your families' rest. | ❤️CUSTOMER SERVICE WE PROVIDED - If you encounter quality and shipping damage issues, please feel free to contact us. At Anborry STORE, you can enjoy unconditional returns and exchange services. We will ensure that customers get the most perfect shopping experience.

❤️SAVE SPACE AT HOME AND CONTROL THE SPREAD OF ODORS - The ultra-thin bathroom trash can with a 4-gallon capacity saves space and is ideal for limited space or tight crevices. After testing, this trash can has very good airtightness and can seal the odor of garbage. It is the perfect partner in your home. | ❤️WATERPROOF AND MOISTURE-PROOF DESIGN - Our motion sensor trash bin adopt high-quality materials and advanced design. This automatic trash can still maintain the sensitive opening and closing performance of the bucket lid in the daily wet and splashing environment, It is not afraid of water splashing, and there is no problem of touch failure. So it is very suitable for toilet, bathroom, living room, bedroom. | ❤️SILENTLY OPENING AND CLOSING - The interior of the rubbish can adopts an upgraded smart chip, which can still maintain high efficiency and long battery life under the premise of satisfying different opening and closing methods of the trash can. Anborry induction trash can cover adopts air damping technology, which can be opened and closed silently and slowly, even if you throw garbage in the middle of the night, it will not disturb your families' rest. | ❤️TOUCHLESS TRASH CAN - Our motion sensor trash can uses advanced automatic sensing technology, you only need to put your hands or knees in the sensing area (6-10 in), then the trash bin can capture your every movement within 0.3 seconds to achieve precise sensing, and finally it will automatically turns off when you leave the sensing area for 6 seconds. Such an intelligent sensor design can easily throw garbage without bending over even when you can't have a free hand. | ❤️CUSTOMER SERVICE WE PROVIDED - If you encounter quality and shipping damage issues, please feel free to contact us. At Anborry STORE, you can enjoy unconditional returns and exchange services. We will ensure that customers get the most perfect shopping experience.

❤️【Small Trash Cans】The 2.2 gallon induction trash can is suitable for small bathroom narrow space and it will look smaller, if you mind, please buy other larger trash cans. | ❤️【Easy to Install the Garbage Bags and Silent Design】The lid of the bathroom motion trash can is removable, it‘s convenient for you to put in and take out the garbage bag. The lid opens and closes silently and will not affect those around you. A detachable bucket ring can firmly fix the trash bag, and will not make it slip off. | ❤️【High Quality Material, Easy to Clean】The non-contact bathroom trash can is made of excellent plastic materials such as ABS+PP, the surface is durable and smooth, it can easily remove the dirt on the surface of the trash can with just one touch. | ❤️【Save Space at Home and Control the Spread of Odors】The ultra-thin bathroom trash can with a 2.2-gallon capacity saves space and is ideal for limited space or tight crevices. After testing, this trash can has very good airtightness and can seal the odor of garbage. It is the perfect partner in your home. | ❤️【Waterproof and Moistureproof, Sensitive Sensor】The non-contact trash can use infrared technology to save battery life, powered by 2 AA batteries (not included), and at the same time use waterproof and moisture-proof materials, it will not affect your use in the bathroom. | ❤️【Perfect Shopping Experience】If you encounter quality and transportation damage issues, please feel free to contact us. You can enjoy unconditional return and refund services. We will ensure that customers get the most perfect shopping experience. | ❤️【Important Reminder】The hands-free operation cover of this trash can opens within 0.1 seconds and automatically closes after 5 seconds of stay. If you need to open the trash can for a long time, you can manually press the up button; after use, manually press the down button to close the trash can.

❤️WATERPROOF AND MOISTURE-PROOF DESIGN - Our motion sensor trash bin adopt high-quality materials and advanced design, powered by 2 AA batteries (not included). This automatic trash can still maintain the sensitive opening and closing performance of the bucket lid in the daily wet and splashing environment, It is not afraid of water splashing, and there is no problem of touch failure. So it is very suitable for toilet, bathroom, living room, bedroom. | ❤️SAVE SPACE AT HOME AND CONTROL THE SPREAD OF ODORS - The ultra-thin bathroom trash can with a 4-gallon capacity saves space and is ideal for limited space or tight crevices. After testing, this trash can has very good airtightness and can seal the odor of garbage. It is the perfect partner in your home. | ❤️TOUCHLESS TRASH CAN - Our motion sensor trash can uses advanced automatic sensing technology, you only need to put your hands or knees in the sensing area (6-10 in), then the trash bin can capture your every movement within 0.3 seconds to achieve precise sensing, and finally it will automatically turns off when you leave the sensing area for 6 seconds. Such an intelligent sensor design can easily throw garbage without bending over even when you can't have a free hand. | ❤️SILENTLY OPENING AND CLOSING - The interior of the rubbish can adopts an upgraded smart chip, which can still maintain high efficiency and long battery life under the premise of satisfying different opening and closing methods of the trash can. Anborry induction trash can cover adopts air damping technology, which can be opened and closed silently and slowly, even if you throw garbage in the middle of the night, it will not disturb your families' rest. | ❤️CUSTOMER SERVICE WE PROVIDED - If you encounter quality and shipping damage issues, please feel free to contact us. At Anborry STORE, you can enjoy unconditional returns and exchange services. We will ensure that customers get the most perfect shopping experience.

3/8" Screw, 16-14 AWG, 25 Pack of Heat Shrink Ring Terminals | Heat activated adhesive built into the sleeve of the heat shrink tubing | Shrinks to form a water tight seal and the ultimate vibration and strain relief. | Tinned for corrosion resistance, Pure copper for maximum current flow | UL listed and CSA recognized

5/16" Screw, 12-10 AWG, 100 Pack of Heat Shrink Ring Terminals | Heat activated adhesive built into the sleeve of the heat shrink tubing | Shrinks to form a water tight seal and the ultimate vibration and strain relief. | Tinned for corrosion resistance, Pure copper for maximum current flow | UL listed and CSA recognized

Tinned for corrosion resistance | Pure Copper for maximum current flow | Heat activated adhesive built into the sleeve of the heat shrink tubing. Brazed seam for maximum strength | Shrinks to form a water tight seal and the ultimate vibration and strain relief | Ul listed and csa recognized

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Relative softness of brass threading when compared to other metals allows for a tight seal | Barbed shank provides secure connection to hose | Temperature range from -32 to +140 degrees F | Intended for use with hose clamp or crimp type ferrule (sold separately) | Note: Kindly refer size chart image before purchase | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Relative softness of brass threading when compared to other metals allows for a tight seal | Barbed shank provides secure connection to hose | Temperature range from -32 to +140 degrees F | Intended for use with hose clamp or crimp type ferrule (sold separately) | Note: Kindly refer size chart image before purchase | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Relative softness of brass threading when compared to other metals allows for a tight seal | Barbed shank provides secure connection to hose | Temperature range from -32 to +140 degrees F | Intended for use with hose clamp or crimp type ferrule (sold separately) | Note: Kindly refer size chart image before purchase | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Relative softness of brass threading when compared to other metals allows for a tight seal | Barbed shank provides secure connection to hose | Temperature range from -32 to +140 degrees F | Intended for use with hose clamp or crimp type ferrule (sold separately) | Note: Kindly refer size chart image before purchase | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Half union for connecting and disconnecting two tubes more easily than with a coupling | 45-degree flare head tube connection on one side and a male NPT connection on the other | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Operating temperature range of -65 to +250 degrees F | Resists mechanical pullout for a more secure connection | These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.