Remotely Power PoE Device Thru CAT5,6,7 Ethernet Cable up to 328 feet(100 meters),Expands networks to areas with no power lines or outlets. | Auto-sensing technology delivers up to 24W to an 802.3af PoE device with backwards compatibility for 802.3af PoE (15.4W) devices. | Save Protection: Short Circuit, Over Current and Over Voltage Protection; Wolrd Wide Input 100-240VDC, Output: Max 24Watt Passive PoE Output | Compatible with Ubiquiti PoE Adapter POE-48-24W,POE-48-24W-WH;Also Compatible with most 10/100Mbps IP camera, IP phone, Wireless IP point and other PoE devices. | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.

PoE injector and splitter kit with 5.5mm x 2.1 mm DC jack / plug | Allows use of any DC voltage up to 57V | Only support 10\100Mbps network. | Transforms Non PoE devices to PoE enabled | Use with IP security camera, wireless access point and other devices

Up to 15W - 24W power over ethernet, Backwards compatible IEEE 802.3af PoE (15.4W). Middle-span and end-span | Converts a non-PoE Gigabit port to a PoE Gigabit port, Network a PoE device located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds | Integrated Power supply for all-in-one design ( Max 24watt) | Compact Wall Plug Design, Outline Size: 90x45x35mm | Compatible with most gigabit IP camera, IP phone, Wireless IP point and other PoE devices.

Remotely power PoE Device Thru CAT.5,6,7 Cable up to 328.1 feet(100 meters) | IEEE802.3af Power over Ethernet with 48V Power Supply, US wall plug type. | Input 100-240VDC, Output: 48V 24W passive PoE Output | Short Circuit, Over Current and Over Voltage Protection | Compatible with most 10/100Mbps IP camera, IP phone, Wireless IP point and other PoE devices.

Split POE ( 802.3af/at) Signal to 12V DC Power (15.4Watt) and 10/100Mbps Ethernet Data | Input 44-57DCV standard 802.3af/at PoE Switch or PoE Injector; Isolation Power Solution with Full Protection. | Data Rate: 10/100Mbps, DC Jack: 2.1x5.5mm | Plug and Play: Compatible with IP camera,IP phone, Wireless AP and other 12V Non-POE devices | Backed by iCreatin 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support.

Provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 100M | IEEE802.3af Power over Ethernet with DC 48V 0.35A Power Supply, US plug type. | Input: AC100-240V 50/60Hz; Output: 48V, 0.35A 15.4W Passive PoE Out | Fully Safety: Short Circuit, Over Current and Over Voltage Protection;Compact size, wall-mountable design makes it easy to install the adapter into areas where space is limited, no configuration required. | Compatible with most 10/100Mbps IP camera, IP phone, Wireless IP point and other PoE devices.

Provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 100M | IEEE802.3af Power over Ethernet with DC 48V 0.35A Power Supply, US plug type. | Input: AC100-240V 50/60Hz; Output: 48V, 0.35A 15.4W Passive PoE Out | Fully Safety: Short Circuit, Over Current and Over Voltage Protection;Compact size, wall-mountable design makes it easy to install the adapter into areas where space is limited, no configuration required. | Compatible with most 10/100Mbps IP camera, IP phone, Wireless IP point and other PoE devices.

1 Gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. | Converts a non-PoE Gigabit port to a PoE Gigabit port, Network a PoE device located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds | Auto-sensing technology delivers up to 15.4W to a PoE device with compatibility for 802.3af PoE devices. | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. | High Performance Gigabit PoE Injector Power supply, IEEE 802.3af Compliant.

Converts a non-PoE Gigabit port to a PoE Gigabit port and network a PoE device located up to 100 meters (328 ft.) Away. If you have a PoE (802.3af) standard device, and need to use PoE technology to provide it with both network and power. | Gigabit Ethernet Speed. This PoE injector equiped with 1 Gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds. | Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.IEEE 802.3af compliant | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.Whether you want to use it with an IP camera in your home or work place, a VoIP phone used in a conference room, or use it to provide power and network to a wireless AP, this item is very suitable as long as your device is 802.3af standard 48V PoE. | Compatible with TP-LINK TL-POE150S and most Gigabit 802.3af IP camera, IP Phone, Wireless IP point and other PoE devices.

Reference Compatible models:PoE Texas PoE Switch injectors POE-8-48v60w GPOE-4A-48v48w PS-48v60w POE-8 GPOE-8A-48v60w AT-4-48v60w | High quality design 48 volt 65 watt power supply for PoE injectors or switches | Input: 100-240VAC , output 48V 1.35A Max 65Watt, with DC jack 5.5x2.1mm | Safety-UL Listed: Built-in over voltage , over temperature , short circuit protection etc. | Use either as primary power, or use to add backup failover power.Warranty 1 year

Remotely Power PoE Device Thru CAT5,6,7 Ethernet Cable up to 328 feet(100 meters),Expands networks to areas with no power lines or outlets. | Auto-sensing technology delivers up to 24W to an 802.3af PoE device with backwards compatibility for 802.3af PoE (15.4W) devices. | Save Protection: Short Circuit, Over Current and Over Voltage Protection; Wolrd Wide Input 100-240VDC, Output: Max 24Watt Passive PoE Output | Compatible with Ubiquiti PoE Adapter POE-48-24W,POE-48-24W-WH;Also Compatible with most 10/100Mbps IP camera, IP phone, Wireless IP point and other PoE devices. | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.

2 Gigabit Ethernet port Input and 2 PoE Gigabit Ethernet port Output offer full duplex 2Gbps Ethernet speeds. | Converts 2 non-PoE Gigabit port to 2 PoE Gigabit port, Network 2 PoE Devices located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds | Auto-sensing technology delivers up to 35W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. | High Performance Gigabit PoE/PoE+ injector, IEEE 802.3af / 802.3at compliant.

Converts a non-PoE Gigabit port to a PoE Gigabit port and network a PoE device located up to 100 meters (328 ft.) Away. If you have a PoE (802.3af) standard device, and need to use PoE technology to provide it with both network and power. | Auto sensing technology delivers Up to 30W of power over ethernet, Supplies PoE (15.4W) or PoE+ (30W) Power | Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.IEEE 802.3af compliant | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.Whether you want to use it with an IP camera in your home or work place, a VoIP phone used in a conference room, or use it to provide power and network to a wireless AP, this item is very suitable as long as your device is 802.3af /at standard 48V PoE. | Compatible with TP-LINK TL-POE160S TL-POE150S and most Gigabit 802.3af IP camera, IP Phone, Wireless IP point and other PoE devices.

Remotely Power 10/100M PoE Device Thru CAT.5,6,7 Cable up to 328 feet(100 meters) | Power over Ethernet w/ 48V Power Supply, Compact Size Convenient US Wall Plug Design | Autoranging Switching Input 100-240VDC, 48V 15.4W (Max 24W) Passive PoE Output | Smart Safety Chip: Short Circuit, Over Current and Over Voltage Protection | Compatible with most 10/100Mbps IP camera, IP phone, Wireless IP point and other PoE devices.

FEATURES / POWER SPECS : Output: 6V DC 2A / Input: 100-240V (Worldwide Compliant) / OEM Original Genuine Charger AC Adapter Power Cord Replacement by iCreatin | COMPATIBILITY: ProForm Fitness Trainer Exercise Cycle Indoor Bike 290 SPX, 490 SPX, 590 SPX ; Recumbent Bike 110R, 315 CSX, XP 440 ; Upright Bike 215 CSX, XP 210, XP Whirlwind 280 ; Treadmill 570 Crosswalk, 505 CST, 790 T, 9.0 Competitor, Crosswalk 395, 397, Performance 1450, 6.0 ZT PFTL39509, 1080, 690, 995, 680, Pro 2000, Pro 2500, Pro 4500; Proform Elliptical 585 Cse 600 Zne 780 CSE 895 ZLE; Ze3 Ze5 6.0 Ze 10.0 Ze; Zx2 Zr3 Xp 185u Xp 400r Stationary Bike | Golds Gym Powerspin 210u 230 230r 290 290u 300u 385 CSX 385csx 390r 490 590r; Transformer Icon 248512; ProForm 150i 235 280 380 480 CSX 300 CR 450UR & 5.0R 390E 590E 380F 785F 800 400 480 490 LE, 405 CE, 465 RE, 290 CSR & 10.8X Stationary Bike 295 390 410 450 480 585 780 980 990 CSE, 600 ZNE, 895 ZLE, 850 1050 STS Crosstrainer 970 XP 420 440 Razor Elliptical ZE3 ZE5 ZX2 ZR3 XP185U XP400R Stationary Bike 249159 10.0ze 20.0 200 280 CSX Re 310 Cx E 380 F 5.0 R 500 580 Cs 585 650T 6.0 Ze ZLE | Full SAFETY Production, Over-Voltage, Over-Current, Over load, Short Circuit Protection | WARRANTY: 30 Days Refund

Output: DC 8.4V 1A Battery Charger (Suitable for 7.2V 7.4V 8.4V 2-string Lithium Battery Pack) | Output interface: 5.5 mm (built-in leaf spring, Compatible with 5.5x2.1mm ).Before Bid, be sure to confirm that the interface size of this product matches with yours. Wrong size will not work!!! | Color indicator LED lights, when full charged, Red color turn to Green | Full Production, Over-Voltage, Over-Current, Over load, Short Circuit Protection | Input voltage: AC 110V / 220V (AC90-264V suitable for anywhere in the world voltage level).

Compatible IEEE 802.3af PoE (15.4W), Middle-span and end-span, Up to Max 24W Power Budget for extend working life | 1 Gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. | Converts a non-PoE Gigabit port to a PoE Gigabit port, Network a PoE device located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds | Supports Ubiquiti POE-48-24W-G POE-48-24W-G-WH, Compact and cost effective PoE injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection | Plug & play, no configuration is needed, simply connect a PoE network device to this PoE adapter, accommodates most installations scenarios.

Up to 65W Power over Ethernet, Supplies PoE (15.4W), PoE+ (30W) or Ultra PoE power (60W) | Supports IEEE 802.3af / 802.3at / Ultra PoE | Converts a non-PoE Gigabit port to a PoE+ Gigabit port, Network a PoE device located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds | Integrated Power supply for All-in-one Design (Included Grounded AC cord) | Compatible with most Gigabit IP camera, IP phone, Wireless IP point, Access Point and other 802.3af/at/Ultra PoE Devices.