【PLEASE FIND THE SPECIAL OFFER, YOU WILL GET 1 CARRYING CASE FOR FREE IF YOU ADD THEM BOTH IN YOUR CART】【MULTIPLE PLATFORMS MONITORING】: Support 1 transmitter with 2 receivers, or 1 transmitter + 1 receiver+ 4 iOS or Android smartphones and tablets. The transmission range is up to 400ft. | 【SDI&HDMI&OLED DISPLAY SCREEN】: Support both SDI&HDMI on the transmitter and the receiver. Be different from Mars 300, The Mars 400S has creative OLED screen, so you can check out all device status and control the system with displayed information on the screen. | 【DUAL POWER SUPPLY OPTIONS】: Support 12V DC power supply and NPF series of batteries. The system also comes with a low-battery warning indicator. | 【CHANNEL SCAN & EASY TO UPGRADE】：Automatically scan the current environment to identify channels with or without inteference.support USB firmware upgrade remotely on both the transmitter and the receiver. | 【WIDE RANGE OF APPLICATIONS】: The Hollyland Mars 400S is mainly used in wedding ceremonies, adverting, short video, live broadcast and etc.. Supports high definition video transmission of 1080P 60Hz with a minimum delay of < 0.1s.

📷【Transverse Sleek Industrial Design & Low-Power Mode】- Mars 400s PRO with the new design, the system is with a lower gravity center, which means it takes less space on setup. Plus the integrated cold shoe on both the transmitter and the receiver, the system provides a much more stable and convenient installation; Without operation for 5s, the OLED screen automatically enters the low-power mode and reduces the brightness to save battery power. | 📷【0.06s, 400ft & Multiple Platforms Monitoring】-The new 400S PRO has 400ft line of sight (LOS) wireless video and audio transmission with 0.06S lowest achievable latency; Hollyland Mars 400S PRO transmitter supports 2 receivers. For the number of RX and App, it follows this pattern: 2 RXs - 0 App, 1 RX - 2 Apps, 0 RX - 4 App. | 📷【Direct Monitoring Video Feed For Live Streaming】-Another new feature of Mars 400S PRO is the direct live stream data feature. Now, with the 400S PRO, video feed straight out of RX will be used for live streaming on OBS, vMix, or VLC on our personal computer without further encryption and decryption via a video capture device. | 📷【3 Application Scene Modes & Optional Fan Modes】-The 400S PRO comes with HD Mode, balance mode and speed mode in the settings. The data rate is raised from 8M Bps to 12M Bps for HD monitoring quality; Optional Fan Modes-off, low speed & auto fan modes for different applications and better shooting experience. | 📷【Multiple Power Options & Wide Applications】- Hollyland Mars 400S PRO supports 5-12V Type-C wide voltage charging options, including various L-series batteries, different power banks and 6~16V DC powering options; Mars 400S PRO is widely used in indie filmmaking, live broadcasting, sports activities, education recording, wedding ceremonies, and corporate events.

📷【400ft & Multiple Platforms Monitoring】- Support 1 transmitter with 2 receivers. For the number of RX and App, it follows this pattern: 2 RXs - 0 App, 1 RX - 2 Apps, 0 RX - 4 App.The transmission range is up to 400ft.300ft Wireless Video & Audio Transmission Range between TX and APP (LOS). | 📷【1080p Video & Audio Transmission】The Mars 400S PRO connects to your camera via a full HDMI port or SDI port, accepts HDMI 1080p 60fps or SDI 1080p 23.98sf video input. Also, the Hollyland Mars 400s pro supports optimal channels a click away on RX and APP. | 📷【Direct Monitoring Video Feed For Live Streaming】With the 400S PRO, video feed straight out of RX will be used for live streaming on OBS, vMix, or VLC on our personal computer without further encryption and decryption via a video capture device. | 📷【Multiple Power Options】Hollyland Mars 400S PRO supports 6-16V DC Power Supply, 5-12V/2A USB Type-C Power Supply and L-series Battery Power Supply. | 📷【Wide Applications】Mars 400S PRO is widely used in indie filmmaking, live broadcasting, sports activities, education recording, wedding ceremonies, and corporate events.

🎬[Wireless Video Transmission Revolution] - COSMO C1 is equipped with Hollyland’s HEVO technology with Adaptive Frequency Hopping (AFH), Seamless Retransmitting and Simplified UVC Streaming, bringing you boosted signal strength and superior Anti-Interference performance. Fast, stable and smart video transmission in 5GHz frequency. | 🎬[Unnoticeable Channel Switching] - HEVO completes each synchronous frequency hopping in 0.001s with only 40ms ultra-low latency and up to 1,000ft line of sight (LOS) range. Whether in manual or auto-switching mode, your Electronic Field Production monitoring will no longer suffer from screen flickering or black screens in complex wireless environments. | 🎬 [Wide Range Device Compatibility] - Embedded with HEVO’s USB Video Capture (UVC) technology, it takes just one USB-C cable to push 1080P60 HD video to your computer for direct live streaming. COSMO C1 supports HDMI/SDI input, HDMI+SDI+UVC Output on RX, and SDI LOOPOUT on TX. It can work with any mainstream camera, monitor, and switcher. | 🎬[Vertical & Horizontal Mounting] - COSMO C1 comes with 1 Peasecod Pan-tilt with Cold Shoe and 1 extra Cold Shoe for you to mount freely. 2 mounting holes at the front panel allows installing the unit horizontally, ideal for evening out the weight to balance the setup on camera and stabilizer, while the 1/4"-20 threaded hole can mount the unit on any tripods. | 🎬[3 Power Supply Options] - As usual, COSMO C1 guarantees that you have nonstop power supply for different shooting scenarios. DC power supply is more suitable for indoor project, while L-series battery [NPF970/NPF750/NPF550] and USB-C port are perfect for your run and gun missions. Power indicator on screen and LED light in red reminds you 20 minutes in advance of a dying battery. | 🎬[Warm Notice] - COSMO C1 supports 1 TX to 1 RX. TX supports HDMI or SDI video input from 1 camera. C1 has 8 frequency channels and supports up to 4 sets working at the same place. Under AUTO channel scan mode, it will switch channels automatically when there is interference. TX’s loopout function only works when input is from SDI port, not HDMI.

No Flickering, No Black Screen: HEVO, a solution embedded with adaptive frequency hopping (AFH) and seamless retransmitting technology, brings exceptional reliability, boosted signal strength, and superior anti-interference performance. | HEVO-Fast, Stable, and Smart : HEVO completes each synchronous frequency hopping in 0.001s at both receiving and transmitting ends that ensures picture integrity at the instant of frequency switching. Whether manual or auto switching mode, your live streaming and production monitoring will no longer suffer black screens. | HEVO-Embeded Video Capture: HEVO embeds UVC (USB Video Capture) into COSMO C1. It simply takes one USB-C to pass 1080P60 HD video quality to your computer for direct live streaming. No video campture device needed, no additional settings. It just works! | HDMI&SDI In/Out + SDI Loopout: Hollyland COSMO C1 allows HDMI & SDI connections on both the TX and RX unit, plus an SDI loop-out on the TX. It can work with any mainstream camera, monitor, or switcher you happen to work on. | HEVO-Ultra Low Latency for Focus Puller: HEVO, based on Hollyalnd's self- developed protocol, improves coding efficiency by 30%. The acceleration module embedded in COSMO C1 achieves an ultra-low latency as low as 40ms. There is no compromise on image output and transmission latency within the 1,000ft LOS range.

HEVO-A Game Changer in Wireless Video Transmission. Hollyland Cosmo C1 is built with the cutting-edge HEVO technology with H.265 compressed transmission, direct UVC live-streaming, 12M~20Mbps code rate, 1080p60 full HD image, Auto Frequency Hopping, and seamless channel switching. Cosmo C1 can reach a 1000ft LOS wireless transmission range with a 40ms ultra-low delay. | Channel Switching, No Flickering. Hollyland Cosmo C1 wireless HDMI and SDI transmitter support both AUTO and manual channel scan. The device smartly scans for uninterrupted frequency in AUTO mode with Adaptive Frequency Hopping and seamless retransmitting technology. Cosmo C1 allows up to 4 sets to work in the exact location without interference in AUTO mode. | Direct UVC, HDMI/SDI Input & Output. No need for a capture card, all you need is a USB-C data cable to do a live stream on your computer. Hollyland Cosmo C1 wireless video transmission system comes with 2 SDI and 1 HDMI port in each unit. C1 TX allows SDI LOOP OUT to a small monitor when using SDI input. C1 RX allows 2 SDI and 1 HDMI video output at the same time. | Multiple Power Supply Options. Hollyland Cosmo C1 video transmitter and receiver support DC (6-16V) power, NP-F series battery (6-16V), and Type-C USB (5V/2A) power input. You can also use a D-Tap cable to connect the DC port to the V-mount battery. DC power and NP-F series battery are recommended as priorities because they are more stable for video production. | Various Video Format, Auto Fan Mode. Hollyland Cosmo C1 video transmitter supports HDMI or SDI input up to 1080p60/59.94/50. C1 receiver supports HDMI and SDI output up to 1080p60/50. TX and RX come with a built-in smart fan to automatically adjust the fan speed according to the device temperature with less than 50 dBA noise. No need to switch fan modes manually.

🎁 Purchasing One or more Mars 300 and Contact us to get a FREE Hollyland Functional Bag!【Unique Portable Perfect Design】 Specially designed to protect hollyland transmission system like hollyland mars 300, mars 400 and other standard devices. | 【Premium EVA Material】 Made of high quality oxford fabric, the travel carrying case is highly engineered and stylish while adding extra durability and protection. | 【Multi Functional】 Separate layer set in the storage bag for storaging all accessories cables, power charger, batteries, SD cards and other smaller equipments directly. | 【Super Waterproof】Come with heavy-duty zipper and friendly handheld belt, hollyland carrying bag goes through all bad weather, ensuring your outdoor shooting! | 【Travel Essentials】With size 6.6 x 5.5 x 3.5 inch, weighing only 7oz, the hard carrying case is well-made for your journey, providing safety and security to your console.

【New Difference From HOLLYLAND MARS 300 PRO】-A 3-in-1 thumbwheel switch menu is added to Hollyland MARS 300 PRO together with a side OLED screen with easy access to the device's power status, channel scan result, video input, channel number, etc., so now people don't have to worry about having their screen blocked when they mount their systems horizontally on the camera. | 【Fan Speed Control】-New added function to adjust the fan speed in order to control fan noise. Regular speed to keep the fan running at its own pace, or low speed for quiet mode when one sets a microphone next to the transmitter. | 【Channel Scan & APP Monitoring】-Hollyland MARS 300 PRO also comes with channel scan on both the receiver and the App, so people can easily identify the best channel to use on a shooting location ahead of time, or anytime. System upgradation can be made through HollyView App, you only need to click your phone screen, and the upgradation for Hollyland Mars 300 PRO is done! | 【2-Way Charging】-Hollyland MARS 300 PRO supports 5-12V wide voltage power supply, including various L-series batteries, different power banks, and Type-C charging. | 【3 Versions& 1 Year Guarantee】-There are 3 versions of Hollyland MARS 300 PRO, Single Transmitter version, Standard version and Enhanced version. Built-in antennas are introduced to Hollyland MARS 300 PRO for easy setup, efficient shooting, and different shooting applications. Standard and Enhanced versions come with receivers with built-in antennas.

【0.08S Incredibly Low Latency & HDMI Loopout Connect Monitor】-0.08S low latency can ensure a good camera operation experience and real-time monitoring; There are 2 HDMI outputs on the receiver while the transmitter comes with a HDMI input and a HDMI loopout, which is essential for people who need an on-camera external monitor. | 【Channel Scan & APP Monitoring】-Hollyland MARS 300 PRO also comes with channel scan on both the receiver and the App, so people can easily identify the best channel to use on a shooting location ahead of time, or anytime. System upgradation can be made through HollyView App, you only need to click your phone screen, and the upgradation for Hollyland Mars 300 PRO is done! | 【New Difference From HOLLYLAND MARS 300 PRO】-A 3-in-1 thumbwheel switch menu is added to MARS 300 PRO together with a side OLED screen with easy access to the device's power status, channel scan result, video input, channel number etc.. | 【Built-in Antennas】-Hollyland Mars 300 Pro features a built-in antennas for easy setups, efficient shooting, and different shooting applications, for better transmit experience , please vertical install the transmitter and receiver. Mars 300 Pro supports 5-12V wide voltage power supply, including various L-series batteries, different power banks, and type-C (5V/2A) charging. | 【Portable & 1 Year Guarantee】-Lightweight and compact design can meet different applications, such as wedding ceremonies/ adverting / short video /live broadcast and so on.

[LONG RANGE AND LOW LATENCY] MARS 300 PRO has a hassle-free wireless video and audio transmission range over 300ft with a clean line of sight (LOS) and with 0.08S achievable ultra-low latency. | [HDMI LOOPOUT CONNECT MONITOR] There are 2 HDMI outputs on the receiver while the transmitter comes with a HDMI input and a HDMI loopout, which is essential for people who need an on-camera external monitor. | [SUPPORT APP MONITORING] When the receiver of MARS 300 PRO is connected to an external monitor on a regular setup, 2 more mobile devices can be connected to the transmitter via HollyView monitoring App. You can download the App in Google Play and App Store. | [NEW DIFFERENCE FROM MARS 300 PRO] A 3-in-1 thumbwheel switch menu is added to MARS 300 PRO together with a side OLED screen with easy access to the device's power status, channel scan result, video input, channel number etc.. | [PORTABLE & 1 YEAR GUARANTEE] Lightweight and compact design can meet different applications, such as wedding ceremonies/ adverting / short video /live broadcast and so on.

📌[New Difference from Hollyland Mars 300 Pro] A 3-in-1 thumbwheel switch menu is added to Hollyland MARS 300 PRO together with a side OLED screen with easy access to the device's power status, channel scan result, video input, channel number, etc., so now people don't have to worry about having their screen blocked when they mount their systems horizontally on the camera. | 📌[Fan Speed Control] New added function to adjust the fan speed in order to control fan noise. Regular speed to keep the fan running at its own pace, or low speed for quiet mode when one sets a microphone next to the transmitter. | 📌[Channel Scan & APP Monitoring] Hollyland MARS 300 PRO also comes with channel scan on both the receiver and the App, so people can easily identify the best channel to use on a shooting location ahead of time, or anytime. System upgradation can be made through HollyView App, you only need to click your phone screen, and the upgradation for Hollyland Mars 300 PRO is done! Please refer to the manual for detailed operation. | 📌[2-Way Charging] Hollyland MARS 300 PRO supports 5-12V wide voltage power supply, including various L-series batteries, different power banks, and Type-C charging. | 📌[3 Versions & 1 Year Guarantee] There are 3 versions of Hollyland MARS 300 PRO, Single Transmitter version, Standard version and Enhanced version. Built-in antennas are introduced to Hollyland MARS 300 PRO for easy setup, efficient shooting, and different shooting applications. Standard and Enhanced versions come with receivers with built-in antennas.

New Features of Hollyland Mars 300 Pro. One-for-all thumbwheel switch provides easy access to settings like CHANNEL SCAN, PAIR, and FAN CONTROL, while the OLED screen allows you to quickly check the power status, video format, and frequency channel. The OLED is designed on the side, so you can mount the unit horizontally without blocking it. | Dual HDMI & LOOPOUT. Hollyland Mars 300 Pro wireless video transmission system can achieve a 300ft transmission range with a stable signal and only 0.08s latency. The transmitter supports HDMI video input and loops out to a monitor, so the cameraman can check the images easily. The receiver supports HDMI video output to 2 monitors. | Channel Scan & Real-time APP Monitoring. Mars 300 Pro supports channel switching on the transmitter, receiver, and Hollyview App, so you can easily choose a clean channel when several systems are used at the same location. With the Hollyview App, you can monitor the video filming and make changes on time, and also upgrade the system when needed. | Fan Speed Control. Hollyland Mars 300 Pro has 2 levels of fan speed in order for you to control the fan noise manually, AUTO and OFF. When it's setting to OFF mode. When the fan is turned off, the temperature of the device itself will rise, but it will not affect the normal operation of the device | Power Supply Options. Mars 300 Pro video transmitter and receiver support USB Type-C charging (5V/2A) like power banks, and NP-F series batteries (5-12V). When you plug in both power supplies at the same time, the device will automatically select the one with higher voltage, and the device will keep working if you remove one of the power sources.

📌【Newest Industrial Design & Low-Power Mode】Hollyland Mars 400S PRO adopts transverse sleek industrial design with integrated cold shoe on both the transmitter and the receiver, which means the system has lower gravity center with more stable and convenient installation. If the system without any operation for 5s, the OLED screen will automatically enters the low-power mode and reduces the brightness to save battery power. | 📌【0.1S Latency, 400ft Range & Up to 4 APP Monitoring】Hollyland Mars 400S PRO has 400ft line of sight (LOS) wireless video & audio transmission range between TX and RX with 0.1S low latency ; 300ft line of sight (LOS) wireless video & audio transmission range between TX and APP. 1 Mars 400S PRO transmitter supports 2 receivers. For the number of RX and App, it follows this pattern: 2 RXs - 0 App, 1 RX - 2 Apps, 0 RX - 4 App. | 📌 【Direct Monitoring Video Feed for Live Streaming】Hollyland Mars 400S PRO supports RTSP live streaming, video feed straight out of RX will be used for live streaming through OBS/Vmix/VLC on our personal computer without further encryption and decryption via a video capture device. only needs a standard RJ45 cable and Type-C to RJ45 connector, no more equipment is needed. | 📌【3 Scene Modes, 3 Fan Modes & 3 Power Options】Hollyland Mars 400S PRO has High-definition mode, balance mode and speed mode in the settings. The data rate raised from 8Mbps to 12Mbps for high -definition monitoring quality. Optional Fan Modes-off, low speed & auto fan modes for different applications and better shooting experience. Supports 6-16DC power supply, 5-12V USB Type-C power supply and L-series batteries power supply. | 📌【What You Can Get & One Year Warranty】Hollyland Mars 400S PRO product package comes with Transmitter X1; Receiver X1; Antenna X5; DC Adapter X1; User Guide X1; Warranty Card X1. And it has one year warranty, if you have any doubts or product issues during the product use, please feel free to contact us for more support.

Transmits up to 1080p60 SDI or HDMI video | 400' line-of-sight transmission to receiver, 300' to App | Real-time app monitoring and live streaming via the HollyView app | Bright OLED display | Simultaneously transmit to one receiver and two apps, or to four apps | HDMI and SDI inputs on transmitter and HDMI and SDI outputs on receiver | Two antennas on transmitter and two antennas on receiver | Power via L-series battery, DC adapter, or USB Type-C input | Integrated shoe adapter with 1/4"-20 mounting thread | Install optional channel scan firmware via the HollyView app to find the strongest signal

【New Difference In Mars 400S PRO】The difference in Mars 400S is reflected in the shell design and the cold shoe is added at the bottom; combined with the real-time streaming design, the network broadcast function is realized. Hollyland Mars 400S PRO supports three power supply: L series battery, 5-12V/2A Type-C and 6-16V DC supply. | 【Receiver for Live Streaming】Confirm that the video format is displayed on both the transmitter and the receiver, use the Type-C LAN connector to connect the notebook computer and the RX, and then set the real-time streaming to realize the web live streaming. | 【Channel Scan & APP Upgrade & High-Definition】Mars 400S PRO supports channel scan and firmware update on APP. In order to choose the best channel, channel scan can be used on receiver and APP, and easy & quick firmware update on the APP. The data raised from 8M Bps to 12M Bps for high-definition monitoring quality. | 【SDI & HDMI & OLED Screen】Mars 400S PRO supports both SDI and HDMI, including SDI IN on transmitter and OUT on receiver, and vice versa. Mars 400S PRO supports OLED display screen, which shows device number, WiFi signal strength, scene mode, USB flash detection indicator, device ID, channel display, video format, fan status, battery voltage display. | 【APP Monitoring & 1 Year Guarantee】Hollyland Mars 400S PRO transmitter supports 2 receivers. When app monitor is connected, 1 transmitter supports 1 receiver and 2 APPs monitoring, or 1 transmitter supports up to 4 APPs monitoring without receiver. Lightweight and compact design can meet different applications, such as wedding ceremonies/advertising /short videos /live broadcast and so on. With one year guarantee.

【SDI&HDMI&OLED DISPLAY SCREEN】: Support both SDI&HDMI on the transmitter and the receiver. With a creative OLED screen, you can check out all device status and control the system with displayed information on the screen. | 【CHANNEL SCAN & EASY TO UPGRADE】：Automatically scan the current environment to identify channels with or without inteference.support USB firmware upgrade remotely on both the transmitter and the receiver. | 【MULTIPLE PLATFORMS MONITORING】: Support 1 transmitter with 2 receivers, or 1 transmitter + 1 receiver+ 4 iOS or Android smartphones and tablets. The transmission range is up to 400ft. | 【DUAL POWER SUPPLY OPTIONS】: Support 12V DC power supply and NPF series of batteries. The system also comes with a low-battery warning indicator. | 【WIDE RANGE OF APPLICATIONS】: The Hollyland Mars 400S is mainly used in wedding ceremonies, adverting, short video, live broadcast and etc.. Supports high definition video transmission of 1080P 60Hz with a minimum delay of < 0.1s.

【Perfect for Mars 4K】: Designed for Hollyland Mars 4K, so it will suit it perfectly. | 【Made of Hard EVA Material】: Made of hard EVA material,waterproof and anti collision, it will always protect your Wireless Video Transmission System. | 【Convenient】The travel case will be very convenient for you when you need take the Hollyland Mars 4K outdoor. | 【Product Dimensions 】: 10.4 x 7.1 x 4 inches (26.5*18*10cm) | 【Weight 】:7oz.

[4K UHD Video Transmission]. As Hollyland’s very first revolutionary 4K transmission system, Mars 4K supports video input/output formats up to 3840x2160@24/25/30fps resolution via HDMI port, and FHD/HD formats like 1080p/720p via HDMI/SDI. Adopting H264 encoding, it can achieve 8-20Mbps bit-rate under HD/Balance/Speed Scene Modes. | [SDI&HDMI Interface, Support Decimal-point Rate]. Hollyland Mars 4K comes with HDMI and SDI options for various applications and compatibility. HDMI supports up to 3840*2160P/4K input output. The 3G-SDI port supports broadcast and production standards frame rate output (23.98/29.97/59.94 FPS) for professional equipment like video switchers. When decimal-point rate video input via SDI port, both HDMI and SDI support decimal-point rate output. | [450FT Range & 66ms Latency]. Mars 4K can reach an incredible 450ft LOS range and 66ms ultra-low delay in an interference-free laboratory environment. Its metal shell, bullet-style antennas, protective interface design, joystick menu button, full-color LCD screen, and strong Electrostatic Discharge ESD protection bring you durable build quality, modern look, ergonomic design, and superior wireless performance. | [Up to 4 APP Monitoring Options]. Mars 4K supports wireless transmission to RXs/iOS/Android phone/tablet devices. When using 1TX to 1RX, it allows 2 monitors via HDMI&SDI cable and 2 mobile devices APP monitoring. When using 1TX without RX, it allows 4 APP monitoring. You can also pair another Mars 4K RX to the system, and wire them to 4 monitors for the director/producer/sponsor to view the shooting on set. | [Superior Design and Experience]. Features superior corrosion and abrasion resistance for top durability even in extreme temperatures. The no-removal bullet antenna design optimizes quick configuration and zero-encumber use. Color LCD screen and user-friendly joystick allow for quick setup and status checks. Supports multiple power options including 6-16V DC power, NP-F970/750/550 battery, 5V/2.5A USB Type-C power.[QC/PD protocol and 5V/2A charging are NOT supported]

🎬[4K UHD Video Transmission]. Mars 4K single receiver supports video output formats up to 3840x2160@24/25/30fps resolution via HDMI port, and FHD/HD formats like 1080p/720p via HDMI/SDI. Adopting H264 encoding, it can achieve 8-20Mbps bitrate under HD/Balance/Speed Scene Modes when pair with the Mars 4K single transmitter and Mars M1 wireless video monitor. | 🎬[SDI&HDMI Interface, Support Decimal-point Rate]. Hollyland Mars 4K comes with HDMI and SDI options for various applications and compatibility. HDMI supports up to 3840*2160P/4K input output. The 3G-SDI port supports broadcast and production standards frame rate output (23.98/29.97/59.94 FPS) for professional equipment like video switchers. When decimal-point rate video input via SDI port, both HDMI and SDI support decimal-point rate output. | 🎬[450FT Range & 66ms Latency]. Mars 4K can reach an incredible 450ft LOS range and 66ms ultra-low delay in an interference-free laboratory environment. Its metal shell, bullet-style antennas, protective interface design, joystick menu button, full-color LCD screen, and strong Electrostatic Discharge ESD protection bring you durable build quality, modern look, ergonomic design, and superior wireless performance. | 🎬[Up to 4 APP Monitoring Options]. Mars 4K supports wireless transmission to RXs/iOS/Android phone/tablet devices. When using 1 Mars 4K TX to 1 Mars 4K RX, it allows 2 monitors via HDMI&SDI cable and 2 mobile devices APP monitoring. You can also use 1 Mars 4K RX to 1 Mars M1 Monitor, then the Mars M1 Monitor becomes a 4K transmitter, it allows connect 1 monitor via Mars M1's HDMI Out and 2 mobile devices APP monitoring. [0 RX-4APP; 1 RX-2APP; 2 RX-0APP] | 🎬[Superior Design and Experience]. Features superior corrosion and abrasion resistance for top durability even in extreme temperatures. The no-removal bullet antenna design optimizes quick configuration and zero-encumber use. Color LCD screen and user-friendly joystick allow for quick setup and status checks. Supports multiple power options including 6-16V DC power, NP-F970/750/550 battery, 5V/2.5A USB Type-C power.[QC/PD protocol and 5V/2A charging are NOT supported] | 🎬[What You Get from the Package]. Receiver*1; Bullet Antenna*2; Self-locking DC Adapter*1; Instruction Manual*1

🎬[4K UHD Video Transmission]. Mars 4K single transmitter supports video input/output formats up to 3840x2160@24/25/30fps resolution via HDMI port, and FHD/HD formats like 1080p/720p via HDMI/SDI. Adopting H264 encoding, it can achieve 12-20Mbps bitrate under HD/Balance/Speed Scene Modes when pair with the Mars 4K single receiver and Mars M1 wireless video monitor. | 🎬[SDI&HDMI Interface, Support Decimal-point Rate]. Hollyland Mars 4K comes with HDMI and SDI options for various applications and compatibility. HDMI supports up to 3840*2160P/4K input output. The 3G-SDI port supports broadcast and production standards frame rate output (23.98/29.97/59.94 FPS) for professional equipment like video switchers. When decimal-point rate video input via SDI port, both HDMI and SDI support decimal-point rate output. | 🎬[450FT Range & 66ms Latency]. Mars 4K can reach an incredible 450ft LOS range and 66ms ultra-low delay in an interference-free laboratory environment. Its metal shell, bullet-style antennas, protective interface design, joystick menu button, full-color LCD screen, and strong Electrostatic Discharge ESD protection bring you durable build quality, modern look, ergonomic design, and superior wireless performance. | 🎬[Up to 4 APP Monitoring Options]. Mars 4K supports wireless transmission to RXs/iOS/Android phone/tablet devices. When using 1TX to 1RX, it allows 2 monitors via HDMI&SDI cable and 2 mobile devices APP monitoring. When using 1TX without RX, it allows 4 APP monitoring. You can also pair another Mars 4K RX to the system, and wire them to 4 monitors for the director/producer/sponsor to view the shooting on set. | 🎬[Superior Design and Experience]. Features superior corrosion and abrasion resistance for top durability even in extreme temperatures. The no-removal bullet antenna design optimizes quick configuration and zero-encumber use. Color LCD screen and user-friendly joystick allow for quick setup and status checks. Supports multiple power options including 6-16V DC power, NP-F970/750/550 battery, 5V/2.5A USB Type-C power.[QC/PD protocol and 5V/2A charging are NOT supported] | 🎬[What You Get from the Package]. Transmitter*1; Bullet Antenna*2; Self-locking DC Adapter*1; Expansion Accessories*1; Instruction Manual*1

【TX, RX, and Monitor-All in One】Hollyland Mars M1 camera field monitor with wireless video transmission solution brings you more efficient monitoring and shooting experience. Switched to TX/RX mode, it can be paired with Mars 4K. As a TX, it achieves a 450ft LOS range and supports up to 4 APP monitoring. | 【5.5" LCD Touch,Born for Filmmaker】The Mars M1 designed with a 5.5" touch LCD featuring up to 1,000 nits of brightness.With professional color calibration performed during manufacturing, each screen is set up with 6500K as the default color temperature, and multiple-level color temperature adjustments are available.1920x1080 high resolution, REC.709, 1000:1 contrast, 16:9 aspect ratio, and 16.7M natural colors for excellent color rendition. | 【4K Monitor without Delay, HDMI & SDI】Mars M1 video camera monitor supports up to 4K/30fps HDMI IN&LOOPOUT. Both HDMI and SDI support broadcast /production standard decimal-point frame rate display, input, and output. Dual interfaces make it more flexible to work with cameras and switchers for professional video production. | 【3D LUT, Preview & Playback】Mars M1 filed monitor's 3D LUT function allows you to load 5 custom LUTs via a FAT32 format USB-C flash drive. It comes with 15 auxiliary functions like 3D LUT, Color Temperature, 4x Zoom, Focus Peaking, Exposure, Waveform, Zebra, Vector scope, Histogram, and Pseudo-color for pro monitoring efficiency. | 【Smart Channel Scan and Selection】Mars M1 4K monitor supports Channel assignment options allow for interference-free transmission. A stable connection is possible automatically upon startup. Smart channel scan helps determine which ones are occupied and selectable.

Hollyland Rosewood Wooden Handle Side Grip for Hollyland Mars M1 Camera Field Monitor

Hollyland Video Monitor Hood Sunshade for Hollyland Mars M1 Camera Field Monitor

🔥【Longer Transmission Distance, Lower Latency】Based on the latest 5G wireless transmission technology, Mars 400S PRO has a transmission range over 400ft(LOS) only within 0.08s latency, ensuring stable and high-speed transmission on different occasions e.g. wedding ceremonies, short video recording, live broadcast and more. | 🔥【Optimized Real-Time APP Monitoring】HOLLYLAND Mars 400S PRO, upgraded with 12M bps data rate for higher-definition image quality, supports 2 mobile devices monitoring+ 1 receiver connected, or 4 mobile devices monitoring without receiver. Compatible with professional monitor features: Waveform, Focus Peaking, Zebra, Zoom In/Out, 3D Luts, etc. | 🔥【Sleek Design with Multiple Fan Modes】 HOLLYLAND Mars 400S Pro adopts lower gravity center for more stability and the brand-new transverse design with more industrial sense. To offer better shooting experience, the system is innovated with Off, Low Speed & Auto Fan Modes, which helps to minimize noise during shooting. | 🔥【Direct Video For Live-Streaming】The mars transmission system supports RTSP, OBS/Vmix/VLC for live streaming without further encryption and decryption via a video capture device. SDI& HDMI inputs on TX and SDI & HDMI outputs on RX flexibly meet various connection demands on different shooting scenes. | 🔥【Multiple Power Options】Hollyland Mars 400S Pro supports 12V DC power charging, type-C(5V/2A) power supply and various L-Series batteries. The system is designed with a low-battery warning indicator, conveniently to observe the battery situation and the informative OLED display screen displays all device status.