12G Internal Mini SAS HD SFF-8643 to Mini SAS SFF-8087 (36Pin), with Sideband, Length: 0.45-meter(1.48ft), 30AWG. | Unrivaled Speed: Data rates up to 12 Gbps, Impedance = 100 Ohms. Fully compliant to the latest SAS 2.1 AND SAS 3.0 interface specifications. | Superior Technology: Internal Mini SAS SFF-8643 to SFF-8087 Cable adopts advanced Twin Axial Cable Technology and makes it Thin, High-bandwidth, Low-skew. | Widely Application: Support Servers, RAID systems, PCIE Controller, Storage systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS). | Premium Design: Internal Mini SAS SFF-8643 to Mini SAS SFF-8087 Cable is a new generation of high density interface, small size and save the equipment space, bandwidth is wider and larger capacity, faster data transfer.

12G Internal Mini SAS HD SFF-8643 to Mini SAS HD SFF-8643 (36Pin), with Sideband, Length: 0.6-meter(1.97ft), 30AWG. | Unrivaled Speed: Data rates up to 12 Gbps, Impedance = 100 Ohms. Fully compliant to the latest SAS 2.1 AND SAS 3.0 interface specifications. | Superior Technology: Internal Mini SAS SFF-8643 Cable adopts advanced Twin Axial Cable Technology and makes it Thin, High-bandwidth, Low-skew. | Widely Application: Support Servers, RAID systems, PCIE Controller, Storage systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS). | Premium Design: Internal Mini SAS SFF-8643 Cable is a new generation of high density interface, small size and save the equipment space, bandwidth is wider and larger capacity, faster data transfer.

12GB/s Mini SAS HD (36P) SFF-8643 to (68P) U.2 SFF-8639 Cable, with (15 pin) Male SATA Power Connector, 0.5-Meter (1.64ft). | Fast data transfer: PCIe 4.0, Impedance = 85 Ohms, support data rates up to 12 Gbps. It is capable of performing 5x faster than a SATA SSD even when a U.2 connection is not available on the motherboard. | Specifically designed to connect U.2 SFF-8639 NVMe SSD to an onboard Mini-SAS HD SFF-8643 port. A perfect solution when a PCIe slot is unavailable. | Integrated SATA power connects U.2 connection to the computer power supply to power the NVMe SSD with 3.3V 12V. | Broad compatibility: RoHS certified and support all NVMe SSD. It is an efficient and productive choice for networks, servers, workstations, External Storage Systems and more.

Mini SAS HD SFF-8643 to Mini SAS SFF-8087 (36Pin) Cable, with Sideband, Length: 1-meter(3.3ft), 30 AWG., 2 Pack, | Internal Mini SAS Cable adopts advanced Twin Axial Cable Technology and makes it Thin, High-bandwidth, Low-skew. | Impedance = 100 Ohms, Support data rates at 12 Gbps. Fully compliant to the latest SAS 2.1 AND SAS 3.0 interface specifications. | Widely Application: Servers, RAID systems, Storage systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS). | Mini SAS SFF-8643 to Mini SAS SFF-8087 Cable is a new generation of high density interface, small size and save the equipment space, bandwidth is wider and larger capacity, faster data transfer.

Internal Mini SAS SFF-8087 to Mini SAS SFF-8087 (36Pin) Cable, 0.8meter(2.6ft), 2 Pack. | High Speed and Stable: Mini SAS SFF-8087 Cable Support 6Gb/s High Speed Transmission, Fully compliant to the latest Mini SAS 2.1 interface specifications, Impedance = 100 Ohms, Low Skew Cable. | Durable and Compact Design: Industrial Mesh harness and Stainless Steel latches at both ends ensure a Solid connection, easy to route in tight spaces. Ideal component of a professional SAN network. | Widely Application: Servers, RAID systems, Storage systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS), Controllers, Expanders, Backplanes etc. | 100% Each Mini SAS Cable is individually done performance test in our test center before packing. Enjoy 30-day free-returned and 1-year warranty service.

External Mini SAS 26pin SFF-8088 to Mini SAS 26pin SFF-8088 Cable Assembly, 2-Meter(6.6ft), 30AWG. | Twinaxial 8-pair high-bandwidth, support transmission rates Up to 6Gbps per channel, Impedance = 100 Ohms, low-skew. | Solid connection and Excellent EMI performance. Easy to install, PLUG AND PALY, Hot pluggable. | Compliant with 3Gb/s SAS and 6Gb/s SAS protocols. | Wide Applications: External cabling solution for Mini-SAS devices. Widely used in DATA Center, Servers, External Storage Systems, SAS, DAS, Switches.

SFF-8644 to SFF-8088 Cable, 1-Meter(3.3ft), Twinaxial 8-pair high-bandwidth, transmission rates Up to 6Gbps per channel, low-skew, Impedance = 100 Ohms, AWG30. | SAS 2.1 drive performance, fully compatible with the SAS 2.1 AND SAS 3.0 interface specifications. | Wide Applications: External cabling solution for connecting Mini-SAS to HD Mini-SAS devices. Widely used in DATA Center, Servers, Storage racks, RAID systems, External Storage Systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS),Switches. | Solid connection and Excellent EMI performance. Easy to install, PLUG AND PALY, Hot pluggable. | Subject to Serial Attached SCSI 6.0 Gbps test certification before shipment.

SFF-8644 to SFF-8088 Cable, 2-Meter(6.6ft), Twinaxial 8-pair high-bandwidth, transmission rates Up to 6Gbps per channel, low-skew, Impedance = 100 Ohms, AWG30. | SAS 2.1 drive performance, fully compatible with the SAS 2.1 AND SAS 3.0 interface specifications. | Wide Applications: External cabling solution for connecting Mini-SAS to HD Mini-SAS devices. Widely used in DATA Center, Servers, Storage racks, RAID systems, External Storage Systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS),Switches. | Solid connection and Excellent EMI performance. Easy to install, PLUG AND PALY, Hot pluggable. | Subject to Serial Attached SCSI 6.0 Gbps test certification before shipment.

SFF-8643 to SFF-8482 Cable: Internal mini SAS (Serial Attached SCSI) SFF-8643 to (4) SAS SFF-8482 fan-out cable, 1X quad-channel SFF-8643 and 4X single-channel SFF-8482, with IDE Molex 4Pin SATA Power, 0.75-meters (2.46 ft) | High-speed Transmission: Point-to-point SCSI data transfer speeds up to 12 Gbit/s, compliant with SAS 3.0, supports up to four SAS/SATA hard drives. | SFF-8643 Connector: Internal HD Mini SAS connector on the host for connecting motherboard or RAID Controller. (Note: Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.) | SFF-8482 Connector: 29-pin SAS drive connector on the target end for connecting directly to the SAS drives. All SFF-8482 cables are wired the same way, no need to worry about directionality. | Widely applicable for enterprise storage, high-performance computing, networking, data centers, workstations, etc.

SFF-8643 to 4x SATA Cable: Internal mini SAS (Serial Attached SCSI) to 4x 7Pin SATA cable, 0.5-meters (1.64 ft) | High-speed Transmission: Point-to-point SCSI data transfer speeds up to 6 Gbit/s, uses less PCB real estate and allows higher port density for internal hosts and devices. | SFF-8643 Connector: Internal HD Mini SAS connector on the host for connecting motherboard or RAID Controller. (Note: Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.) | SATA Connector: 4x 7Pin SATA is the target, connect to the hard drives with SATA ports | Widely applicable for enterprise storage, high-performance computing, networking, data centers, workstations, etc.

SFF-8643 to 4x SATA Cable: Internal mini SAS (Serial Attached SCSI) to 4x 7Pin SATA cable, 1-meters (3.3 ft) | High-speed Transmission: Point-to-point SCSI data transfer speeds up to 6 Gbit/s, uses less PCB real estate and allows higher port density for internal hosts and devices. | SFF-8643 Connector: Internal HD Mini SAS connector on the host for connecting motherboard or RAID Controller. (Note: Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.) | SATA Connector: 4x 7Pin SATA is the target, connect to the hard drives with SATA ports | Widely applicable for enterprise storage, high-performance computing, networking, data centers, workstations, etc.

10Gb SFP+ Cable: 10G SFP+ to SFP+ DAC Twinax cable assembly support 10 Gbps data rate, 10GBASE-CU Passive, 0.25 meter (0.82 ft), 30 AWG; DAC Length includes 2 SFP+ connectors | Multi-brand Compatible: Perfect for Cisco SFP-H10GB-CU0.25M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, Quanta, Solarflare, PaloAlto, F5, etc. | Efficient Design: 10Gb SFP+ DAC cable is a good alternative to link 10G SFP+ ports, with low-cost, low power consumption and low latency; All products are passed by TDR & VNA tests in our Signal Integrity Lab | Extensive Application: 10Gb SFP+ cable widely used in various devices, such as Fiber Switch, Storage, Router, Server,Firewall, NIC, Media Converter, Date Center and Other fiber optic equipment with SFP+ ports | Friendly Service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support

10Gb SFP+ Cable: 10G SFP+ to SFP+ DAC Twinax cable assembly support 10 Gbps data rate, 10GBASE-CU Passive, 0.3 meter (0.98 ft), 30 AWG; DAC Length includes 2 SFP+ connectors | Multi-brand Compatible: Perfect for Cisco SFP-H10GB-CU0.3M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, Quanta, Solarflare, PaloAlto, F5, etc. | Efficient Design: 10Gb SFP+ DAC cable is a good alternative to link 10G SFP+ ports, with low-cost, low power consumption and low latency; All products are passed by TDR & VNA tests in our Signal Integrity Lab | Extensive Application: 10Gb SFP+ cable widely used in various devices, such as Fiber Switch, Storage, Router, Server,Firewall, NIC, Media Converter, Date Center and Other fiber optic equipment with SFP+ ports | Friendly Service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support

✅10G SFP+ to SFP+ DAC Twinax cable assembly, 10GBASE-CU Passive, 1.5-meter (5ft), AWG30. DAC Length= with 2 SFP+ connectors. | ✅Widely compatible with Cisco SFP-H10GB-CU1.5M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, Quanta, Solarflare, PaloAlto, F5 and Other Open Equipments with 10G SFP+ ports. | ✅10G SFP+ DAC cable is a good alternative to link 10G SFP+ ports, with low-cost, low power consumption and low latency. All products are passed by TDR & VNA tests in our Signal Integrity Lab. | ✅10G SFP+ cable widely used in various devices, such as Fiber Switch, Storage, Router, Server,Firewall, NIC, Media Converter, Date Center and Other fiber optic equipments with SFP+ ports. | ✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support.

10Gb SFP+ Cable: 10G SFP+ to SFP+ DAC Twinax cable assembly support 10 Gbps data rate, 10GBASE-CU Passive, 2 meter (6.6 ft), 30 AWG; DAC Length includes 2 SFP+ connectors | Multi-brand Compatible: Perfect for Cisco SFP-H10GB-CU2M, Ubiquiti UniFi UC-DAC-SFP+, Meraki, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Linksys, Broadcom, Zyxel, Quanta, Solarflare, PaloAlto, F5, etc. | Efficient Design: 10Gb SFP+ DAC cable is a good alternative to link 10G SFP+ ports, with low-cost, low power consumption and low latency; All products are passed by TDR & VNA tests in our Signal Integrity Lab | Extensive Application: 10Gb SFP+ cable widely used in various devices, such as Fiber Switch, Storage, Router, Server,Firewall, NIC, Media Converter, Date Center and Other fiber optic equipment with SFP+ ports | Friendly Service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support