Gorilla Heavy Duty Construction Adhesive is a tough, versatile, all-weather adhesive. Unlike other construction adhesives, it's 100% adhesive formula provides a long-lasting, heavy duty bond. We call it All Surface, All Purpose. The durable, 100% waterproof formula holds up indoors and out and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foam board, marble and more. Directions: All surfaces should be clean and free of dirt, grease and oil. Best if used above 40°F. 1. Unscrew nozzle, cut tip of cartridge, replace nozzle and cut to desired bead size. Insert into cartridge gun. 2. Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps. 3. Within 10 minutes, press surfaces together and hold for 20-30 seconds. NOTE: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors. 4. Allow 24 hours to cure. Note that cure times will increase with lower temperature, humidity and if bonding non-porous surfaces. Gorilla Construction Adhesive is best if stored in a cool, dry location, with the nozzle attached filled with adhesive. The best way to store Gorilla Construction Adhesive for reuse is to leave the nozzle filled with adhesive attached to the cartridge between uses. The adhesive left in the nozzle acts as a cap and seals the material in the cartridge. If the cartridge is reused within a few days, the nozzle can be removed and the plugged material can be poked out and then reused. If it has been more than a few days, the easiest way to reuse, is the cut the nozzle farther to eliminate the plugged material. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.