✔ 394FT HDMI EXTENDER- With a single CAT5e/6/7 cable, you can easily extend HDM signals up to 394ft. Direct 1-to-1 connection or 1-to-many through Gigabit network switches. Additional receivers (part# HDbitTv2-RX, version 2.0) are sold separately. *Important Note*: HDbitTv2 (this kit, version 2.0) is NOT backward compatible with the previous version and its receivers (RX) | ✔ HDMI EXTENDER over IP NETWORK DISTRIBUTION - Each transmitter (TX) can connect up to 30 receivers (RX). 1-to-many configuration through 1) Unmanaged/Dedicated Gigabit switches, 2) Smart Gigabit switches with VLAN to segregate video traffic from the rest of the LAN. Many-to-many configuration is also supported via VLAN setups; Note that each VLAN can only accommodate 1 transmitter (TX); We recommend gofanco 24-port video Ethernet switch (EthSwitch24P-2, B085DD9GG4); Don't use with home routers | ✔ VIDEO RESOLUTIONS & AUDIO - Supports up to 1080p; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video and audio experience; Supports 2-channel Stereo Audio; * Note: There’s a 250ms or less delay/latency due to data compression; Not recommended for real-time applications, such as PC gaming | ✔ IR EXTENSION - You can control the HDMI source device at a remote location with the included IR cables that forward commands over a CAT cable | ✔ SIMPLE INSTALLATION - No software is required for this hdmi extender. Surface mountable metal housing provides durability and higher level of RF/EMI shielding; FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. Please click on gofanco in the buy box and select “Ask a Question” if you have any questions or concerns