【Strong Toughness & Incredible Performance 】--GIANTARM PLA (PolyLactic Acid) 3D Printer Filament makes by corn, have advantage of high purity with low shrinkage and superb layer bonding, which will bring outstanding smooth and stable printing quality. This High quality PLA Filament can meet your demands for different printing projects with higher toughness. | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Keep Filament Dry】Using the 3D printer filament storage kit, you can protect your filaments from moisture, dust, odours, etc. The pressure condition is in best condition. | 【Large size and Durable Reusable】The size of the bag is 40x40cm. The thickened vacuum bag is made of high-quality PA+PE material, which is durable and reusable, safe and environmentally friendly. After vacuuming, it can be kept vacuum dry for more than one year. | 【Electric Seal】The storage bag can be connected with an electric pump. It requires 3 AAA batteries (not included). No manual extraction is required, the automatic pump is designed to automatically extract air from the vacuum bag easier and faster. | 【Easy to use】Put the filament in the vacuum bag(Desiccant can be put in at the same time), use the clip to seal the bag, connect the power supply of the vacuum pump, align the pump port with the suction valve of the vacuum bag and tighten it, and then start the button for air extraction. (Desiccant and filament are not included.) | 【What is included】Electric pump x 1, 40x40cm single roll bag x 4. Double seal with one sealer per bag, suitable for 0.5 kg 1 kg PLA / ABS / nylon / wood / TPU 1.75 mm 3.0 mm 3D printer filament.

【Strong Toughness & Incredible Performance 】--GIANTARM PLA (PolyLactic Acid) 3D Printer Filament makes by corn, have advantage of high purity with low shrinkage and superb layer bonding, which will bring outstanding smooth and stable printing quality. This High quality PLA Filament can meet your demands for different printing projects with higher toughness. | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Strong Toughness & Incredible Performance 】--GIANTARM PLA (PolyLactic Acid) 3D Printer Filament makes by corn, have advantage of high purity with low shrinkage and superb layer bonding, which will bring outstanding smooth and stable printing quality. This High quality PLA Filament can meet your demands for different printing projects with higher toughness. | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. GIANTARM high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result! | 【Toughness Enhanced PLA Filaments】---GIANTARM Silk PLA filaments have the advantages of incredible toughness, unique printing quality, high purity with low shrinkage and superb layer bonding, meeting your personalized printing demands for functional parts. | 【Dimensional Accuracy & Consistency】- Advanced CCD diameter measuring and self-adaptive control system in the manufacturing to make these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.03 mm; 1 kg spool (2.2lbs),suitable for most FDM 3D prnter. | 【Clog-free & Bubble-Free】- Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the PLA filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. GIANTARM high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result! | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. GIANTARM high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result! | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Strong Toughness & Incredible Performance 】--GIANTARM PLA (PolyLactic Acid) 3D Printer Filament makes by corn, have advantage of high purity with low shrinkage and superb layer bonding, which will bring outstanding smooth and stable printing quality. This High quality PLA Filament can meet your demands for different printing projects with higher toughness. | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. GIANTARM high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result! | 【Less-tangle & Wide Compatibility】--Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market. | 【1.75mm PLA Filament】--GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color. | 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190℃ -215℃, bed 40℃-60℃. | 【Professional Packaging】--Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". please remember to put it back into the re-sealable bag timely after using to maintain excellent.

【Glow in the Dark】This luminous filament contains glow powder, which looks white or clear at day, but it can emit amazing green light in the dark after absorbing light energy. We suggest to expose the model to strong sunlight or UV light for 30 minutes to obtain excellent effect. | 【Excellent Quality】This filament has high precision, no bubbles, no clogging, no drawing, no smell, It has high toughness and high compatibility, compatible with all FDM 3D printers using 1.75mm filament. | 【Recommended Setting】Nozzle temp: 190-230℃(374-446℉), Hot bed: 50-70℃ (122-158℉), Printing speed: 15-30mm/s, Nozzle size: ≥0.4mm(It’s better), net weight: 1kg (2.2lbs) | 【Print for Festivals and Parties】PLA glow filaments can be made into prints that glow at night, which is very suitable for printing decorations for party, Thanksgiving and Christmas, and also suitable for glow sticks, lampshades and models,etc. | 【Vacuum packaging and after-sales】Giantarm filaments are vacuum packed with desiccant to keep moisture low and prevent nozzle clogging. If you have any product quality problems, please feel free to contact us, we hope to solve your problem within 24 hours.