Cover your hot shoe from getting bent or damaged | Good looking design for your camera, very easy to put it on | Spring-inset allows exact-fit slide-on. The cover only shields the hot shoe, not support pop-up flash | Keeps the hot shoe dry and clean | The Hot Shoe Cover cap, fits most cameras. Note: Not compatible with Sony FA-SHC1AM/S

Protect your hot shoe from getting bent or damaged | Help to keep moisture and dust from the hot shoe | Fits securely over the hot shoe | Very easy to put it on | Durable plastic cover cap, fits most cameras

Innovative, circular design that takes up less space compared the typical, cumbersome 2-axis or 3-axis levels. | Protect your hot shoe from getting bent or damaged. This hot shoe cover helps the hot shoe dry and clean. | Slides into your hot shoe, remains unobtrusive. The cover only protects the hot shoe, not the support of the pop-up flash. | Fits securely over the hot shoe. Has a Rubber surface for better handling. | Note: It is not compatible with Sony FA-SHC1AM/S. Compatible with Sony A3000, A3500, A58, A6000, A6100, A6300, A6400, A6500, A6600, A68, A7, A7 II, A7 III, A7R, A7R II, A7R III, A7R IV, A7S, A7S II III, A9, A9 II, A99 II, A1 DSC-HX400, DSC-HX400V, DSC-HX50, DSC-HX50V, DSC-HX60, DSC-HX60V, DSC-RX10 V, DSC-RX10 IV, DSC-RX10 III, DSC-RX10 II, DSC-RX1R, DSC-RX1R II.

Cover your hot shoe from getting bent or damaged | Good looking design for your camera, very easy to put it on | The cover only shields the hot shoe, not support pop-up flash | Keeps the hot shoe dry and clean | Metal cover cap, fits most cameras. Note: Not compatible with Sony FA-SHC1AM/S

Wireless Shutter Release -Trigger the cameras shutter release remotely from a distance | Eliminates vibrations caused by physically pressing the shutter release. | Operating range- up to 32 ft. | It is powered by a CR-2025 3v battery (included). | Compatible with Pentax. 1 Year Replacement Warranty by FotoTech.

The top of bag closed completely to protect from dust etc | Vibrant Camouflage-design for proud elegance, 1/8" thick, with extra padding for base | Used as easy-clip hook, allows you to attach pouch to any ring, as on camera bag, backpack, etc | Attach the pouch for convenient carrying, by its unique, durable, tightly-woven black grosgrain belt loop | Durable, safe, light, space-saving

Functions as an intervalometer, self-timer, and long-exposure timer | Built in interval timer; LCD Screen with backlighting | Buttons operated with a single thumb; Two-stage shutter release; Half-pressing will focus the lens; Fully pressing will trigger shutter | Delay time: 0s to 99hrs 59min 59s (in one-second increments); Exposure time: 0s to 99hrs 59min 59s (in one second-increments); Interval Length: 1s to 99 hrs 59min 59s (in one-second increments); Number of shots: 1 to 399 | Two AAA battery included

Functions as an intervalometer, self-timer, and long-exposure timer | Built in interval timer; LCD Screen with backlighting | Buttons operated with a single thumb; Two-stage shutter release; Half-pressing will focus the lens; Fully pressing will trigger shutter | Delay time: 0s to 99hrs 59min 59s (in one-second increments); Exposure time: 0s to 99hrs 59min 59s (in one second-increments); Interval Length: 1s to 99 hrs 59min 59s (in one-second increments); Number of shots: 1 to 399 | Two AAA batteries included

Works with any threaded release mount | Cable release have a locking function | Vibration-free Shutter Release for long exposures | Locks after pressing the button, lifts up the chrome ring beneath the plunger after pressing the release button | High quality vinyl-coated cable with Steel

The top of bag closed completely to protect from dust etc | Vibrant Camouflage-design for proud elegance, 1/8" thick, with extra padding for base | Used as easy-clip hook, allows you to attach pouch to any ring, as on camera bag, backpack, etc | Attach the pouch for convenient carrying, by its unique, durable, tightly-woven black grosgrain belt loop | Durable, safe, light, space-saving

5 PIECES. Every piece of the convert screw adapter is a ¼” female thread to ⅜” male thread, the height is 5/16" . You have spares of the reducer bashing in case of emergencies. | EASY TO SET UP. Setting up the reducer bashing is simple. Just insert one end of the screw adapter to the hole and twist in. Attach the device on the other end and the setup is ready to use. | MULTIPURPOSE. These tripod thread adapters are compatible with the Lens Plate Button Head and the Arca Swiss Type Button Heads, but they can be mounted on other devices such as microphones, light stands, ballheads, DSLRs and other equipment. You can use these convert screw adapters with old base plates to attach modern tripods. | FITS WELL TO ADJUST. The reducer bushing allows you to adapt any standard male 3/8"-16 thread to be inserted to any standard female 1/4"-20 hole. | DURABLE METAL. These tripod thread adapters are made of 100% metal. They are capable of carrying items with a maximum weight of 9 ounces. The threads were cut evenly and well-machined.

1/4" to 3/8" Convert Screw Adapter | Thread Adapter with female 1/4" thread to male 3/8" thread, the height is 5/16" | Compatible to Lens Plate Button Heads, Arca Swiss Type Button Heads | Fit as well as original reducer | Made of metal, solid and durable

Ergonomic - The Foto&Tech hot shoe thumb grip works well, especially compatible with Fujifilm XT5, XT-1, XT-2, XT-4, and XT-4. It's designed to offer a secure grip while maintaining the normal features and functions of the camera. Capture those shots without anything getting in the way! | Stable - The thumb grip provides more structure to cameras. It improves your camera handling and stability (especially at slower shutter speeds). It also enables one-handed operation on the field. | Secure - The hot shoe grip provides that extra support and security without adding any bulk to the camera body like a normal external grip would. Perfect for both portrait and landscape positions, especially works best with street photography, sports or wildlife shoots. | Better Workflow - The hot shoe thumb grip makes your shooting experience much more comfortable with camera bodies that don’t have the ideal grip. Improve your photography experience that doesn’t involve extra bulk and weight of vertical and battery grips. Capture each shot the way you want it to be! | Easy to Install - The hot shoe thumb grip requires none to minimal assembly. Simply slide the camera accessory onto the camera’s hot shoe and it's good to go. Available in four colors: red, silver, black, and yellow.

Ergonomic - The Foto&Tech hot shoe thumb grip works well, especially compatible with Fujifilm XT5, XT-1, XT-2, XT-4, and XT-4. It's designed to offer a secure grip while maintaining the normal features and functions of the camera. Capture those shots without anything getting in the way! | Stable - The thumb grip provides more structure to cameras. It improves your camera handling and stability (especially at slower shutter speeds). It also enables one-handed operation on the field. | Secure - The hot shoe grip provides that extra support and security without adding any bulk to the camera body like a normal external grip would. Perfect for both portrait and landscape positions, especially works best with street photography, sports or wildlife shoots. | Better Workflow - The hot shoe thumb grip makes your shooting experience much more comfortable with camera bodies that don’t have the ideal grip. Improve your photography experience that doesn’t involve extra bulk and weight of vertical and battery grips. Capture each shot the way you want it to be! | Easy to Install - The hot shoe thumb grip requires none to minimal assembly. Simply slide the camera accessory onto the camera’s hot shoe and it's good to go. Available in four colors: red, silver, black, and yellow.

Ergonomic - The Foto&Tech hot shoe thumb grip works well, especially compatible with Fujifilm XT5, XT-1, XT-2, XT-4, and XT-4. It's designed to offer a secure grip while maintaining the normal features and functions of the camera. Capture those shots without anything getting in the way! | Stable - The thumb grip provides more structure to cameras. It improves your camera handling and stability (especially at slower shutter speeds). It also enables one-handed operation on the field. | Secure - The hot shoe grip provides that extra support and security without adding any bulk to the camera body like a normal external grip would. Perfect for both portrait and landscape positions, especially works best with street photography, sports or wildlife shoots. | Better Workflow - The hot shoe thumb grip makes your shooting experience much more comfortable with camera bodies that don’t have the ideal grip. Improve your photography experience that doesn’t involve extra bulk and weight of vertical and battery grips. Capture each shot the way you want it to be! | Easy to Install - The hot shoe thumb grip requires none to minimal assembly. Simply slide the camera accessory onto the camera’s hot shoe and it's good to go. Available in four colors: red, silver, black, and yellow.

Connects PocketWizard Plus X Plus II Transceiver to Camera | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | Durable and Trustworthy Cord | 1-Year Warranty

Connects PocketWizard Plus X Plus II Transceiver to Camera | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | Durable and Trustworthy Cord | 1-Year Warranty

MADE IN USA. Anti Lost-- easy applied in second, perfect fit, environment friendly, never lose the original lens cap again! | Classic Look-- premium 1MM thickness leather cover Sticker with “Nikon” logo cut out, giving your camera a shinier and more Classic look | High Performance-- strong 3M adhesive, removable, no residue on the lens cap surface, anit humidity and moisture, 3M high performance adhesive temperature resistance up to 400 F | Convenience--18CM durable nylon cord 2mm thickness, oval soft bead keep two cord strings organized, Light weight | Save Money--saved the cost of buying lens cap replacements. Including 2 Pack 52 mm Leather Sticker Logo Cut out Camera Lens Cap Holder Keeper. Camera and lens caps are not included.

MADE IN USA. Anti Lost-- easy applied in second, perfect fit, environment friendly, never lose the original lens cap again! | Classic Look-- premium 1MM thickness leather cover Sticker with “Nikon” logo cut out, giving your camera a shinier and more Classic look | High Performance-- strong 3M adhesive, removable, no residue on the lens cap surface, anit humidity and moisture, 3M high performance adhesive temperature resistance up to 400 F | Convenience--18CM durable nylon cord 2mm thickness, oval soft bead keep two cord strings organized, Light weight | Save Money--saved the cost of buying lens cap replacements. Including 2 Pack 67 mm Leather Sticker Logo Cut out Camera Lens Cap Holder Keeper. Camera and lens caps are not included.

All weather approved. Precision made of metal, rust free, durable. | Protect your hot shoe from getting bent or damaged, help to keep moisture and dust from the hot shoe | Fits securely over the hot shoe. The cover only protect hot shoe, not support pop-up flash | Smooth surface, very easy to put it on. | Giving your camera a shinier and more “complete” look

Connects PocketWizard Plus III Plus II Plus MultiMAX Transceiver to Camera | Connectors: 2.5mm Plug to Connection | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | 1-Year Warranty

Connects PocketWizard Plus III Plus II Plus MultiMAX Transceiver to Camera | Connectors: 2.5mm Plug to C1 with 2.5mm Sub-Mini Connections | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | 1-Year Warranty

Connects PocketWizard Plus III Plus II Plus MultiMAX Transceiver to Camera | Connectors: 2.5mm Plug to N1 with 10-PIN Connection | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | 1-Year Warranty

Connects PocketWizard Plus III Plus Plus II MultiMAX Transceiver | Connectors: 2.5mm Plug to N3 with DC-2 Connection | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | 1-Year Warranty

Connectors: 2.5mm Plug to RR-90 Connection

Connects PocketWizard Plus III Plus II Plus MultiMAX Transceiver to Camera | Connectors: 2.5mm Plug to C3 with 3-Pin Connection | Stretchable spiral coiled cord, easy to use and carry | 13 inch coiled cable stretches to approximately Max 34 inch | 1-Year Warranty

Made of rubber for soft eye contact. You can even view it with your glasses on | Cushions your face while looking through the viewfinder | Attaches to the viewfinder eyepiece minimizing extraneous light and vision fatigue | 100% Brand New, High Quality | The Eyecup provides cushioning around the camera's eyepiece, and is especially useful to eyeglass wearers

Made of rubber for soft eye contact. You can even view it with your glasses on | Cushions your face while looking through the viewfinder | Attaches to the viewfinder eyepiece minimizing extraneous light and vision fatigue | 100% Brand New, High Quality | Provides cushioning around the camera's eyepiece, and is especially useful to eyeglass wearers

Oversized eyecup provides great comfort with its soft and durable rubber | Comfortable for people who wear glasses, rotate 360º to accommodate both the left and right eye and horizontal and vertical shooting positions | Minimizes oil stains on LCD, seals out ambient light | Reversible to fit both left and right eye, self locking mount keeps eyecup secure | Prevents viewfinder from fogging up, prevents scratching of eyeglasses

SOFT & FLEXIBLE. Foto&Tech’s rubber dust blower is made of thick but soft silicone rubber that won’t scratch your expensive equipment. Its flexible nozzle is great for small-scale cleaning. This hand air blower gets inside small crevices to clear dust off your camera without issue. | ERGONOMIC DESIGN. Convenience is always key. This rubber dust blower delivers an ample amount of air through it’s valve when squeezed. The air blaster comes with an easy, hand-grip design that makes squeezing the hand air blower comfortable. | COMPACT & PORTABLE. Cleaning items that require a certain amount of care? This hand air blower is easy to store inside your bag. Its soft rubber silicone body is impact proof. Take it anywhere you go. | VERSATILE USES. This hand air blower is a must-have, all-purpose tool. It’s small but powerful and gets the job done. This hand dust blower is perfect for cleaning inside and in-between your electronics (such as cameras, PCs, keyboards, gaming consoles, etc.), creating arts and crafts, and even gardening. | ALTERNATIVE TO AEROSOL CANS. Foto&Tech’s rubber dust blower is a great substitute to the more expensive compressed air cans and electronic blowers. This air blower is handy, green, and energy-saving. It requires no batteries and contains no other substances that can negatively affect sensitive devices.

Durable aluminum body, resists stain and soiling, protects overheat | Fast Data/Files Access and Transfer Rate Super-Speed (5Gps) / High-Speed (480Mbps) / Full-Speed (12 Mbps) | Truly Plug & Play and Hot swapping capability,USB-powered (no external power or battery needed); Backward compatible with USB 2.0 / 1.1 | Compatibility: Windows XP/Vista/7/8 Mac OS etc, no software required | Small and light weight, more easily for information exchange

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.

QUICK RELEASE: Allows for fast and convenient attachment and detachment for your camera strap when needed. | DURABLE: The quick release clip is made of alloy and the quick release lug ring is made of stainless steel. Together they have a breaking force of up to 33 lbs! | COMPATIBLE: Suitable for any small and/or mirrorless camera. | EASY INSTALLATION: Attach the lug ring to either your camera strap or camera and click the clip in place. | COMES IN A SET: This product comes with 2 clips + 2 lug rings per set. The quick release clip’s dimensions are 2.5cm x 1cm with a diameter of 0.5 cm. The quick release round lug ring’s opening width is 3mm.