All featured including waveform,vector,all scopes,etc.Screen Size: 7".Screen type: IPS display.High resolution : 1920x1080.Brightness: 450cd/m2. Contrast Ratio: 1200:1 . Wide viewing angle: 170 degree. | It supports HDMI 4K input/output.(No SDI for this model A50TL).3.5mm headphone output.Compatible with almost all cameras and camcorders. USB port for firmware upgrade.Built-in audio input.Multiple connecting holes (1/4",3/8" ,M6 and cold shoe connector) | Supports screen touch control and physical buttons control.Silent physical operation buttons.Support shortcut button setting. | Supports 3D LUT function.There are default undeletable 5 inter LUT files,and you can also import extra 8 LUT files. | Dual battery compartment for NP-F NP-FM/QM batteries,and this would extend your working time greatly. You can also use LP-E6 battery (battery plate for LP-E6 need to buy separately).When power by NP-F or LP-E6 battery or a dummy battery,there is also a battery output for power your camera directly from monitor.

Fotga AC Power Adapter + NP-F Dummy Battery DC Coupler for NP-F970 NP-F960 NP-F770/F750/F550 to Power Video LED light Camera Monitor YN300 II YN-600 W260 5080LED 5010LED 5012LED 5010A | Suitable for powering Video LED light,monitors,etc.Can not be used for powering camera directly.Not for Atomas Ninja V. | Input:110V-240V,50/60HZ,1.2A,Ouptut:7.4V | DC cable with 5.5*2.1mm connector | Package includes: 1 x AC power adapter with NP-F dummy battery

Fotga AC Power Adapter with DC 5521 Output for DSLR Camera Field Monitor Video LED Light. | Input: AC Power 100-240V / 50-60HZ. | Output:DC 5.5*2.1MM 8V 3A. | Length of cable with US plus is 120cm/47inch. | Package includes: 1 x AC power adapter US plug with DC output.

Fotga AC Power Adapter 12V 3A Output for Blackmagic Pocket Cinema Camera 4K 6K and 6K Pro G2 BMPCC 4K 6K Pro G2 | Input:100V-240V,Output:12V 3A.Length: 218cm / 85.8inch. | Customized 2pin socket perfectly fits BMPCC 4K 6K and 6K Pro G2 camera | Package includes: 1 x AC power adapter cable for BMPCC 4K 6K Pro G2

Made of aluminum. | Threaded 52mm 55mm 58mm 62mm ring adapter set ,both front and rear are threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 4 x S.light ring adapter (52mm/55mm/58mm/62mm)

Made of aluminum. | Threaded 55mm ring adapter,both front and rear are 55mm threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 1 x S.light 55mm ring adapter

Made of aluminum. | Threaded 58mm ring adapter,both front and rear are 58mm threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 1 x S.light 58mm ring adapter

Made of aluminum. | Threaded 62mm ring adapter,both front and rear are 62mm threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 1 x S.light 62mm ring adapter

Made of aluminum. | Threaded 72mm ring adapter,both front and rear are 72mm threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 1 x S.light 72mm ring adapter

Made of aluminum. | Threaded 77mm ring adapter,both front and rear are 77mm threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 1 x S.light 77mm ring adapter

Made of aluminum. | Threaded 82mm ring adapter,both front and rear are 82mm threaded,can install 2 filters at the same time. | Suitable for Fotga DP500IIIS s.light mini matte box | Package includes: 1 x S.light 82mm ring adapter

It features arca swiss bottom plate for attaching your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.There are also 3/8″-16 and 1/4″-20 holes at the bottom for attaching on tripod,light stand,etc. | This tripod mount ring helps fix and balance your tele lens which is heavy or long lens hanging off the front of camera. | Suitable for Tamron 35-150mm F/2-2.8 Di III VXD Lens Model A058 E mount and Z mount ,For Sigma 100-400mm F5-6.3 DG HSM lens EF and F mount. | Made of aluminum alloy.Ring dia is 84mm/3.3in,weighs 140g/0.31lb. | Package includes: 1 x Lens tripod mount ring

The Male Side (To The Side Of The Camera ) : 37mm | The Female Side (To The Side Of The Lens) : 42mm | Made of metal (not plastic) Color : Black | Suitable For Access a wider variaty of filters, adapters, hoods and more... | Packing included:1 *Step Up Filter Ring

The Male Side (To The Side Of The Camera ) : 58mm | The Female Side (To The Side Of The Lens) :55mm | Made of metal,Color :Black | Suitable For Access a wider variaty of filters, adapters, hoods and more... | Package including: Filter ring adapter X 1

This remote control supports focus control,IRIS control ,zoom control ,and start/stop recording functions for Panasonic camcorder. | It can be fixed on 10mm to 30mm diameter rod,claw is with rubber cushion to prevent slipping.Coiled cable length is stretchable to max 70cm/27.55inch. | By pressing the red button to start / stop video recording,easy operation button for W / T control, one knob for controlling focus and one knob for controlling iris,eliminating camera shake and improving image quality. Zoom speed can be adjusted by changing finger strength. | No battery required. | Suitable for Panasonic camcorder:HC-X1 HC-PV100 AG-AC30 AG-UX90mc AG-UX180 HC-X1000 AG-AC90 AU-EVA1 AC90MC DVC33 DVC63 DVC15 180 180A 180B AG-HMC43MC AG-FC100MC ac130MC hmc153MC ac160MC 173MC dvx200MC AG-HVX203AMC 260MC 265MC 285MC PX298MC PX280 AG130 AG160 HVX200 HVX203 MDH3 z10000,etc.

This remote control supports zoom control ,IRIS control and start/stop recording functions for Sony camcorder for Panasonic with 2.5 mm LANC or REMOTE terminal. | It can be fixed on 9mm to 30mm diameter rod,claw is with rubber cushion to prevent slipping.Coiled cable length is stretchable to max 70cm/27.55inch. | By pressing the red button to start / stop video recording,easy operation button for W / T control, eliminating camera shake and improving image quality. Zoom speed can be adjusted by changing finger strength.Big knob for IRIS adjusting (only works with lens with G mark) | No battery required. | Toggle switch for quick switching for Sony and for Panasonic camcorder.Suitable for Sony PXW-z90 Z100 Z150 z190 Z1C Z5C Z7C FS5 FS7 FS7M2 FS7H FS700 FX6 FX9 FX1000E FX1E FX7E VX2000E 2100E 2200E AX2000E 190p 198p HXR-MC2000E HXR-MC2500 A1C V1C HD1000C 1500C 2500c 250P PD100AP PDX10P 900E 940E 950E HXR-NX5P NX3 NX5r NX70C NX80 NX5C NX3C NX100 NX200 ax700 AX1E PXW-X160 PXW-X180 PXW-Z280 EA50,etc,for Panasonic cx200m HC-X1500gk,etc.

This remote control supports zoom control and start/stop recording functions for Sony camcorder for Panasonic with 2.5 mm LANC or REMOTE terminal. | It can be fixed on 10mm to 30mm diameter rod. | By pressing the red button to start / stop video recording,easy operation button for W / T control, eliminating camera shake and improving image quality. Zoom speed can be adjusted by changing finger strength. | No battery required. | Toggle switch for quick switching for Sony and for Panasonic camcorder.

It is specially designed for DSLR and Mirrorless Camera mounting on Zhiyun Crane 2 3 LAB Weebill 2 3 Weebill-S Gimbal Stabilizer. | It is also compatible with Manfrotto 501HDV 503HDV 701HDV MH055M0-Q5 Ball Head. | With 1/4"-20 screw for DSLR mirrorless camera,1/4" screw can move by 65mm/2.56in.D-ring lock at bottom for easily attaching and detaching camera.1/4"-20 thread hole by sides for more extension. | Scale by sides for easy position adjustment.Size:95mm*50mm*15mm / 3.7in*19in*0.6in,weight:65g/0.14lb.Soft cushion at bottom protect camera from scratching. | Made of aluminum alloy with CNC machine.surface oxidation treatment.Package includes: 1 x QR plate,1x 1/4"-20 screw

It is specially designed for Sony Canon Nikon DSLR Mirrorless Camera to mounting on DJI Ronin RS2 RSC2 RS3 RS3PRO RS3 mini RS3 Pro ,RS4 and RS4 Pro Gimbal Stabilizer. | With 1/4"-20 screw for DSLR mirrorless camera,1/4" screw can move by 22.3mm/0.89in.D-ring lock at bottom for easily attaching and detaching camera.Also compatible with arca swiss clamp. | Size:44mm*38mm*12mm / 1.73in*1.49in*0.45in,weight:21g. | Soft cushion at bottom protect camera from scratching. | Package includes: 1 x QR plate,1x 1/4"-20 screw

Made of carbon fiber,lightweight and durable. | Matte surface treatment. | Color:black. | Package includes:1x Carbon fiber top flag

Its designed C-shaped track and the 3 adjustable joins let this bracket can be adjusted to multi-shape for different situation | This bracket let the flash unit can be placed at side or top even taking pictures horizontally or vertically | Suitable for most DV/Mini DV Camcorder/DC/DSLR with standard 1/4" tripod socket | Suitable for most Continuous LED Phot/Video lights and Flashes with standard hotshoe | Adjustable Bracket Base for Different LCD Panel Size

Fotga DP3000 M3 swing away lens matte box.One-button Releasing 90 Degree Swing-away Type, Filter Tray 180 Degree Rotatable,Compatible with 15mm Rail System. | Supports holding 2pcs of 4x4 filter (each filter up to 4mm in thickness),and one filter tray is rotatble by 180 degree. | Multiple donuts ring for different lens.(103mm,76mm,64mm,51mm) | Standard 15mm rail lens follow focus,made of plastic,compact,lightweight.Precision with no backlash. | 0.8 drive gear can be mounted on both side of the follow focus,repeatale and removeable mark ring.

Fotga DP3000 Compact Single 15mm Rail A/B Stops Lens Follow Focus is specially designed for working on DSLR Mirrorless Cinema Video camera for making video filmmaking. | Compatible with 15mm rail system.Angle of handwheel is adjustable according to need.3 different size gear (38T/43T/65T) for different need to different lens. | Comes with A/B hard stops for quick and accurate focus change between 2 points.Single-15mm-rod clamp makes it able to mount different place flexiably. | Made of high quality plastic,lightweight,zero backlash.Design on handwheel ensures non-slip during operation. | Package includes: 1 x Fotga DP3000 Lightweight follow focus,1 x Gear belt,3 x Gears (38T,43T,65T)

Height Adjustable | Come with two 30cm length rods | This Rail System has a central Tripod Mounting plate that makes a perfect balance between the camera and the front mount accessories (35mm adapter/Mattebox/Follow Focus) | Strong enough to support the large variety of smaller cameras and bigger cameras as well | Base stand bottom with both 3/8" and 1/4" screw sockets, compatible to mount on any tripods

Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods, center-to-center rails distance 60mm | The kit includes one French flag, and two adjustable side wings. Each of the three flaps can be positioned and locked in place so as to suit different focal lengths by providing the maximum amount of shading without getting in the way of the shot | With height adjustment feature so that the height of the Matte Box can be adjusted as per the the height of the camera lens. You can Adjust the height up to 45mm | A set of 4 “donut” rings are included.(Size at 103mm,76mm,64mm,51mm).By fitting one of these rings, light from the rear of the matte box can be blocked out, leaving only the camera lens protruding through. Donuts are slightly flexible, and the four sizes range to fit almost any lens diameter | Material: Made of Metal and Plastic

【Fits for almost all cameras,15mm rail system】Universal design for all camcorders and DSLRs & Industry standard 15mm supporting rods, center-to-center rails distance 60mm | 【90 degree Swing-away type,easily and quickly chenge lens】You can easily swing-away the mattebox without disturbing the camera from the tripod and rail system.you can free open from one sides ,applied in the photographic process frequent replacement lenses and filters ,easily and convenience.Extra center-to-center 60mm 15mm rail holes on the swing-away bracket for mounting more accessories. | 【2 filter trays,one is totatble】2 dual-purpose filter trays made of plastic,supporting 4"x4" filter used .one filter tray is fixed,another one of the filter trays is rotatable,which will be helpful when you use gradual ND filter | 【3 flags greatly block lights】French Flag/Side Flags : The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached /detached easily.Both flags can be folded for storage. | 【Flags angles are adjustable】The flags are attached firmly on the sunshade mattebox by hinge mechanism. The side flags can be opened to the desired length by using the small knob provided on the flags

This Fotga DP500 II quick-release is a upgraded version for the first DP500 generation. It becomes much more appliable and usable | This 15mm rod rail camera support is made of metal,very sturdy for your heavy cameras. Besides,it is consisting of a quick-release plate which makes it easily to attach or detach the device | What's more,it's special design make it comaptible with Arca series and PU60 quick-plate. It is composed of 2 height riser, a sliding rail block and two 15mm rods | This Rail System has a central Tripod Mounting plate that makes a perfect balance between the camera and the front mount accessories (35mm Adapter/Mattebox/Follow Focus) | This rail system also has built-in Lens Support which is very useful accessory to support any lens. This Rail System is strong enough and it can support the large variety of smaller cameras and bigger cameras as well

DP500 Mark III Quick Release A/B Hard Stops Dampen Follow Focus | Integrated with A/B Hard Stops, stoppors can also be detached and then stored in the slots within the follow focus itself | Compatible with industry standard 15mm rods,Rail distance: 60cm, Rail diameter:15mm | Cameras: Sony A7 Series,（A7,A7R,A7S), A7II Series（A7II,A7RII,A7SII）,Panassonic GH3/GH4,Blackmagic BMPCC,Canon5DII/5DIII/5DIV,D500;Camcorders: Blackmagic BMPC/URSA/URSA mini, Sony FS100/FS700/FS5/FS7/F55/F5/F3, RED SCARLET/EPIC/RAVEN/ONE,Kinefinity KineRAW/KineMAX | Suitable for: All DSLR cameras, Video cameras, Interchangeable-Lens cameras

Made of metal | Color: Blue | 2pcs hard stops fixation scew + 1pcs scale pillar | Suitable for DP500III follow focus | Package including: Screw x 3

Work with and Charge for Sony Standard V mount Battery or replacement of Sony V mount battery.Please ensure your battery has the same mount as Sony Standard BP battery,such as BP-L60A and BP-L90A,etc.Compatible with 15mm rail system. | Work with and Charge for Sony Standard V mount Battery or replacement of Sony V mount battery.Please ensure your battery has the same mount as Sony Standard BP battery,such as BP-L60A and BP-L90A,etc.Compatible with 15mm rail system. | MIC can manage different inputs intelligently and ensures no interrupt during swift input changes,and ensures continuous power supply during a change between AC power and V-mount battery power. | Interface for camera/camcorder (8V-output) fits for all cameras/camcorders with 7V-9V voltage output. 14.8V output fits for all large-scale camcorders with 12V-16.8V wide voltage input.For GH4/GH5/GH5s camera,please ensure your dummy battery is decoded one. | DP500 CCUPS version power supply device allow stacking together mutually through Fotga dedicated interface.Theoretically,it can extend out multiple output interfaces for devices or cases in need of multiple input supplies.

【No Backlash,Sturdy Metal Made,Comfortable Rubber-covered Handwheel】Material: Sturdy Metal CNC Machined,New design on its inner structure to reach a high level, while the damping gives virtually zero backlash(<0.5mm).Handwheel is covered with well-made rubber,this would bring comfortability on operation especially in extremely weather as well as preventing slipping | 【Well-made Gearbox,Tightness Adjustable】Long-life precision engineered gearbox enables accurate and reliable focusing,2 levels adjustable damping.Drive gear can be mounted from both side.(Works for both right-handed and left handed),Drive Gear Interface: Compatible with JTZ X Type Interface Standard | 【A/B Hard Stops,15mm Quick-release Rod Slider】Integrated with A/B Hard Stops, stoppors can also be detached and then stored in the slots within the follow focus itself. | Multiple Gear Size for Option】Can use different size gears to meet your need with different lenses. This set comes with 3 size gears.(M0.8-38T/M0.8-43T/M0.8-65T),you can also buy extra 0.5 78T and 0.6 64T gear for extension. | 【Standard 12x12 Connection Port,Flexible Gear Belt】Work with speed crank and speed whip with standard 12x12mm connector.Flexible gear belt can be adjusted from 46mm to 110mm to be compatible with different lens.

Material: rubber and plastic,Easy to make adjustment,fast locking | Suitable for all DSLR Cameras,video cameras,DV,HDV,HDSLR. | Gear module: Film industry standard 0.8. Flexible Follow Focus Gear Ring Belt fits any lens with diameter from 46 to 110mm. | Lever length:Approx.60mm. Color: Black gear ring+ Grgy lever | Package including: Fotga follow focus lever handle(Grgy)+ gear ring x1

Fotga Dummy Battery Replacement LP-E17 DR-E18 DC Coupler for Canon EOS R8 R10 RP R50 77D 850D 800D 760D 750D 200DII 200D T6i T6s Rebel T7i Kiss X8i DSLR Mirrorless Camera,Compatible Fotga DP500III V Mount JTZ C5 LE | DC port: 5.5*2.1mm,please be mind this product does not work with EOS M3 M5 M6. | Output: 7V 3A | Material:ABS,Cable length:35cm-110cm | Package includes: 1 x LP-E17 dummy battery

Universal E-III Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder | Universal Removable metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe | A hole with locking screw in middle specially designed for holding umbrella. Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle | Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle | Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread

Specially designed for Canon EF&EF-S mount DSLR Cameras | Designed to enable a lens to focus closer than its normal set minimum focusing distance, getting closer has the Effect of magnifying your subject (making it appear larger in the viewfinder and in your pictures), they are exceptionally useful for macro photography | Consisting of 13 mm, 20 mm and 36 mm tubes, each tube has electronic contacts, they can work alone or in different combination | Supports automatic focusing, automatic exposure, and may more 1/4" mount screw on 20 mm tube | Made of aluminium and plastic, package includes: 1 x autofocus extension tube, 1 x front lens cap, 1 x rear lens cap

It is specially designed for Canon EF&EF-S mount DSLR Cameras | It is designed to enable a lens to focus closer than its normal set minimum focusing distance. Getting closer has the effect of magnifying your subject (making it appear larger in the viewfinder and in your pictures). They are exceptionally useful for macro photography. | Consisting of 13mm,20mm and 36mm tubes.Each tube has electronic contacts.They can work alone or in different combination. | it supports automatic focusing, automatic exposure,etc. 1/4" mount screw on 20mm tube. | Made of alluminum and plastic.Package includes: 1x autofocus extension tube , 1 x front lens cap,1 x rear lens cap

This high quality automatic macro Extension Tube Set is designed to enable a lens to focus closer than its normal set minimum focusing distance | It contains 2pcs tubes in different length 10mm/16mm, which can be used in any combination or individually to obtain the different magnification | Designed with electronic contacts,which make it support automatic focusing,automatic exposure,etc. | It enables you to use all shooting modes of the camera,exposure compensation is required | Suitable for:FujiFilm X Mount X-Pro1 X-Pro2 X-Pro3 X-H1 X-A2 X-A3 X-A10 X-A20 X-A5 X-A7 X-T1 X-T2 X-T3 X-T10 X-T20 X-T30 X100F X100T

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder | Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe | A hole with locking screw in middle specially designed for holding umbrella | Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle | 1/4" and 3/8" socket can be changed of the base for tripod or light stand through turning the inside gold stuff.(Not Included)

Fotga standard speed crank handle for follow focus is made of aluminum, anodized black. | Fits to follow focus with standard 12mmx12mm port.90 degree right angle and bulb knob design,very convenient to control the follow focus. | Safty-lock design at the 12mmx12mm terminal,makes it insert the follow focus firmly,not falls off. | Made by CNC machine . Material: Metal | Connector size:12mmx12mm Length:100mm Weight:80g

Specifically designed for Nikon AF-S Nikkor 28-300mm F/3.5-5.6g ED VR Camera Lens,it's replacement of HB-50 | Primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens | In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact | This dedicated lens hood is designed to match the specific focal length of the lens it was designed for | Made of plastic