Replacement tip for PRO3000 analog probe | Two per bag

Easy to use adjustable volume control dial | Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures | “Quick twist” tip for easy replacement | Operates off a 9V battery with additional replacement probe tip stored in battery compartment | SmartTone technology provides 5 distinct tones for exact pair identification

Sends a loud tone up to 16 kilo meter (10 miles) in most cables for locating and tracing, and checks continuity and polarity on inactive networks | Alligator clips attach to wires, screws, and various terminals, and RJ11 plug connects to telephone jacks | Isolate individual pairs with SmartTone technology that generates 5 different tones | Continuity and polarity are indicated by dual color lids | Tone can be located and traced by a compatible analog probe (sold separately)

Sends a loud tone up to 16 km (10 miles) in most cables for locating and tracing, and checks continuity and polarity on inactive networks | ABN clips easily allow access to individual wire pairs and RJ11 plug easily connects to telephone jacks no need for adapters | Isolate individual pairs with SmartTone technology that generates 5 different tones | Continuity and polarity are indicated by dual color LEDs | Tone can be located and traced by a compatible analog probe (sold separately)

Replacement wiremap adapter for use with MicroScanner POE (Power over Ethernet) MS-POE copper cable test unit, this is an optional accessory | Includes MicroScanner POE main assembly wiremap adapter (testing device sold separately), one year warranty | Allows user to terminate twisted pair cabling and detect all types of wiremap faults such as opens, split pairs, shorts, crossed wires or crossed pairs (MS-POE Mainframe sold separately)

Clear innovative filter technology blocks interference (“buzz”) that makes tracing difficult | Switch between filtered and unfiltered modes with 1 button press | Tone and trace wire on non active networks | Auto off capability extends battery life | Loud probe speaker is audible in noisy locations

Innovative filter technology blocks interference "buzz" that makes tracing difficult, sends loud tone up to 10 miles (16 kilometers) on most cables, easy to hear through drywall, wood, and other enclosures | Kit includes: Pro3000F filtered probe with 60Hz frequency filter and Pro3000 tone generator, angled bed-of-nails clips for individual pairs, RJ-11 connector for use on telephone jacks and nylon case which attaches to a belt, replacement tip for probe, requires 9V battery not included | SmartTone technology provides 5 distinct tones for exact pair identification so you can find cables faster on non-active networks | Tone and trace wire on non-active networks, filtered/unfiltered mode button with LED (green = filtered, red = unfiltered), 3.5 millimeter headphone jack and volume dial, replaceable tip | Loud probe speaker is audible in noisy locations, turns off automatically after 5 minutes to extend battery life

125 wipes on a perforated roll for easy access. Each wipe can clean 4 end-faces. | Included in various fiber-optic cleaning kits offered by Fluke Networks | Made in the USA | Package weight of the Product: 0.56 pounds

Contains everything needed to eliminate the #1 cause of fiber link failure: contamination | Cards for convenient cleaning of fiber end-faces | Fiber Optic Cleaning Kit - Includes cleaning cube with wipes, ten cards with sealed cleaning zones, solvent pen, 2.5mm port cleaning swabs and 1.25mm port cleaning swabs in a rugged carrying case | Item Package Dimension: 5.51" L x 10.63" W x 12.6" H

The complete solution for precision end-face fiber optic cable cleaning, contains tools and supplies everything needed to eliminate the #1 cause of fiber optic link failure: contamination | Kit includes: QuickClean cleaner for 1.25 mm connectors, QuickClean cleaner for 2.5 mm connectors, QuickClean cleaner for MTP/MPO connectors, solvent pen, cleaning cube; and a soft case | Supports all fiber connector types in datacenter and campus environments, with easy-to-use tools | Solvent pen precisely dispenses specially formulated fiber optic cleaning solution and cards for convenient cleaning of fiber end-faces, cleaning cube with wipers cleans up to 500 end-faces | Rugged carrying case stores and transports all fiber optic cleaning tools and supplies

Solvent pen precisely dispenses specially formulated fiber cleaning solution | Precision cleaning of end-faces on both patch cords and inside ports | Dissolves contaminants | Neutralizes static charge | Encapsulates particles for removal

Works with SC, ST and all other 2.5 mm ferrule connectors | Designed for bulkhead and equipment cleaning when used with Fluke Networks Solvent Pen | 50 Count | Made in the USA

Accessory For Cable Testing And Office Identification | Unit Count: 1.0 | Package Dimensions: 14.7 L X 26.4 H X 17.5 W (Centimeters) | Product Type:Precision Measuring