Pocket sized voltage detector that quickly tests for energized circuits in the home or workplace | Non contact detector senses the steady state electrostatic field produced by AC voltage through insulation | Tip glows red, and the detector beeps (optional), if voltage is present | Detects 90 to 1,000vac | Safety rating of 1000v category iv, meets iec 61010 1:2001, ul 61010 1 (2nd ed.), can/csa c22.2 no. 61010 1 04, and isa 82.02.01 pollution degree 2 | Voltbeat technology and continuous self test so you always know it is working | Upon detection, tip glows and beeper sounds | Cat iv 1000 v for added protection | Expanded range: 90 v to 1000 v ac or 200 v to 1000 v ac depending on model | 20 v to 90 v ac control circuit model also available

Voltbeat technology and continuous self-test - so you always know it is working | Upon detection, tip glows and beeper sounds | CAT IV 1000 V for added protection | Range 90-volt to 1000-volt | 20-volt to 90-volt AC control circuit model also available

Pocket sized, pen style low voltage detector that quickly tests for energized circuits in the home or workplace | Non-contact detector senses the steady state electrostatic field produced by AC voltage through insulation | Tip glows red, and the detector beeps (optional), if voltage is present | Detects 20 to 90 VAC | Safety rating of 1000V Category IV, meets IEC 61010 1:2001, UL 61010 1 (2nd ed.), CAN/CSA C22.2 No. 61010 1 04, and ISA 82.02.01 Pollution Degree 2 | Volt beat technology | Continuous self test | Meets 1000 V, CAT IV safety rating | Light source: One high intensity red LED | Round tip

Nominal current: 440mA | Digital mustimeter replacement fuse | Package Weight : 0.15 pounds | Package Dimensions: 19.05 L x 1.016H x13.716W(centimeters)

Voltbeat technology and continuous self test so you always know it is working | Upon detection, tip glows and beeper sounds | 20 volt to 90 volt AC control circuit model also available | Voltbeat technology and continuous self test so you always know its working | Voltage detection from 90 to 1000 V ac | NEW! Innovative ‘Battery Check’ button function | NEW! Always on, using special low power circuitry | Integrated clip design, optimized for pocket storage | Category IV – 1000 V overvoltage rated product

Pocket sized, pen style voltage detector that tests for energized circuits and defective grounds | Non contact detector senses the steady state electrostatic field produced by ac voltage through insulation | Tip glows red, and the detector beeps (optional), if voltage is present | Detects 90 to 1,000vac | Category iv 1000v rating, and meets iec 61010 1:2001, ul 61010 1 (2nd ed.), can/csa c22.2 no. 61010 1 04, and isa 82.02.01 pollution degree 2

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current | The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform | Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits | Audible continuity sensor confirms that the circuit conducts electricity | Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

Precise laser technology for more accurate measurements | Large, easy to read backlit LCD display for easy viewing | Small and lightweight design fits easily fits into your tool box | Temperature range: 30 degree C to 500 degree C ( 22 degree F to 932 degree F) | Used only for industrial purpose (for monitoring electrical, mechanical, HVAC, and automotive systems) and not for health care purpose | 10:1 distance to spot ratio | IP40 rated for extra protection against airborne contaminants

The Fluke slim-reach test probe is designed for probing closely spaced or recessed terminals | Hard stainless steel probe tips | Flat blade design to hold securely in blade type electrical wall sockets | CAT IV 600V, CAT III 1000V, 10 A rating, UL listed | 1 Year warranty

Multiple functions with Auto / Manual ranges | Large LCD display, 4,000 Counts update 3/sec | Frequency:50Hz to 100Khz | Temperature: -55C to 400C | Dimension : 180 x 89 x 51.5mm

Brand: Fluke | Fluke 941 Light Meter Illuminance Meter Tester

3 test leads (red, black, green) connected to low-leakage probes | 3 alligator clips (red, black, green) | 2.6m lead length | 26mm maximum jaw opening | Replacement test lead set for the fluke 1550B MegaohmMeter | Starter kit for industrial applications | Includes one pair each Red and Black of AC220, TP220 and TL222 | 1000 volt CAT III, 600 volt CAT IV, 10 amps