-----Specifications：
♥ Uses: Resin Jewelry Making Kit,Resin Kit for Beginners, Jewelry Making End Caps,Resin Jewelry Making,Jewelry Craft Resin Kit,clear epoxy resin, epoxies resin, diy epoxy epoxy, resin Kit ,epoxy resin crystal clear, epoxy resin,resin for jewelry making, etc.


When using the art resin, there are some tips for you of resin epoxy kit.
1. Before diy epoxy resin kit, please read the complete operation guide and video.
2. The resin and hardener mixed in a 1:1 ratio must be measured by volume rather than weight.
3. Stir epoxy resin slowly and thoroughly uniform until art resin becomes clear(stirring too fast can cause bubbles).When epoxy resin becomes smooth((watery status),pour it into the model to ensure sufficient self-leveling
Remind kindness of resin epoxy：
✔ 1. Mix ratio: Double check the proper 1:1 by volume mix ratio was used;
✔2.Resin and hardener: Make sure you used resin and hardener and not all resin or all hardener;
✔ 3.Fully mixed: Upon mixing, be sure to scrape sides and bottom of mixing container to ensure all resin and hardener are fully blended. Failing to do so can result in soft spots in coating;
✔4.Pouring: NEVER scrape or brush the sides or bottom of the container you just mixed. There will always be an unmixed portion which can be dislodged and will leave a wet or sticky spot on your coating;
✔5.Temperature: If the temp falls below 60°F while epoxy resin is initially setting up, it may stall out the chemical reaction needed to harden the epoxy. Increasing shop temp to 80°F+ for poxy before do a test 24 hours may help to restart the chemical reaction and harden roject. The following the epoxy coating.
✔6.Our epoxy resin is not for tumblers craft.