D-TAP 2 Pin Male to 2 Pin female extension cable for Bauer Battery | D-tap Male to Male connection cable | Cable length is 1 meter (after strength) | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

Apply for Lanparte power supply system, power the BMPCC from battery pinch 12V DC port | BMPCC barrel DC connector diameter:0.7mm | It can definitely work for BMPCC with the Max load current up to 4A | With 90 degree design, the cable will not come out from the camera easily and it can protect the camera interface from bending. Also it allow the perfect distance to mount the HDMI cable on | Straight lines can also be customized, please contact us.

D-Tap to 2.5mm Locking DC Barrel Adapter Cable for Decimator MD-HX and DMON | The D-Tap to Decimator MD-HX and DMON Barrel Power Cable from Camera Motion Research is designed to work exclusively with the Decimator MD-HX and DMON converters. | Threaded Locking Nut Right Angle Locking 2.5mm DC | Cable length: 20'' 50CM （We can make any length you need ) | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

58957 GPS antenna TNC-TNC cable for all Trimble GPS. | Plug A: TNC male connector; Plug B: Right Angle TNC male connector. | Cable length: 10m (We can make other length, please contact us if you need.) | Each units are checked and tested in full to avoid any short circuit before we send it out. | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

58957 GPS antenna TNC-TNC cable for all Trimble GPS. | Plug A: TNC male connector; Plug B: Right Angle TNC male connector. | Cable length: 2.8m (We can make other length, please contact us if you need.) | Each units are checked and tested in full to avoid any short circuit before we send it out. | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

Connect Servo Controller to Servo Lens，Control Both Focus and Zoom。 | For FPD-400D and ZSD-300D Controllers,For Canon 18-80mm and 70-200mm Lenses | Simultaneously control both zoom and focus for Canon CN-E servo lenses using two servo controllers with this Stratus Lens Control Y-Cable from ikan. The Y-cable features two female controller 20-pin connectors on one end and a single, right-angle male lens servo 20-pin connector on the other end. | Cable length :10"inch about 25cm | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

For Smallhd 702 touch monitor, Atomos Ninja V, Atomos Shogun, Lectrosonics venue VR IFB, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: D-tap Male. | Plug B: Locking right angle 2.5mm DC, compatible with 2.1*5.5mm or 2.5*5.5mm. | Cable length: 20'' 50CM （We can make any length you need ) | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

Preston MDR 3/4 Run/Stop Cable for Sony FX6/9 Camera. | Connector A: 10 Pin Male Right Angle | Connector B: LANC 2.5mm TRS Right Angle | Cable length: 35cm (other length you need, you can contact us to customize). | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping.Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Right Angle 2 Pin male Power Cable for Teradek Bond | Fit For : Teradek Bond/Preston / Paralinx Power Cable/ARRI Alexa Camera | Cable length: 45CM/18inch | Each cable was tested to ensure that there are no short circuit ,no potential breakdown problems before shipping, and it is work great! | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

Timecode cable for Canon R5C and tentacle sync. For Blackmagic Video Assist 5” 3G. | It feeds devices with a DIN 1.0/2.3 input, including for Canon EOS R5 C or Atomos UltraSync ONE TCG. You can also jam-sync any Tentacle device from an external timecode source with a DIN 1.0/2.3 connector. | Connector A: DIN1.0/2.3. Connector B: 3.5 mm TRS Right Angle. | Cable length: 30cm (other length you need, you can contact us to customize). | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means that you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.

The viewfinder cable is used for Sony Venice camera and DVF-EL200. | Connector A: Straight 26pin male connector; Connector B: Right Angle 26pin male connector. | Cable length: 23.6in/60cm (we accept to customized length, please contact us if you need). | Each cables are checked and tested in full to avoid any short circuit before we send it out. | Dear Buyer, Please Recognize Eonvic original packaging. Eonvic Seller is Only a Genuine Seller. That means you'll have the full force of the Eonvic Manufacturer Warranty to protect your purchase.