Convert mSATA SSD to 2.5 SATA interface easily ( fit for mSATA SSD 30x50mm ).Note:Does not support Samsung 850 EVO,NOT support mini PCI-e interface. | mSATA 3.0 interface max speed 6Gbps. Plug and play, and widely compatible with Win 10 / 8 / 7 / VISTA / XP / Linux. | Could use SATA cable(NOT Included) to plug into laptop, also you can install mSATA to SATA enclosure in mainframe computer or cd-ro

Add four USB 3.0 Port to your to your PCIe-enabled desktop easily with PCI Express to USB3.0 Controller Adapter. Each interface owns individual 2A power supply, 4 interfaces work independently of each other, total 8A. No additional power cord is required. Note: Not Support LINUX system. | 【High Speed】 Adopt NEC Main control chip, to reach USB 3.0 Max 5Gbps transmission speed, 4 USB 3.0 port can wo

【5Gbps High Speed】SATA to USB 3.0 cable, easily connect a 2.5 hard drive to laptop. Transmission speed rate up to 600Mbp/s, support UASP. | 【Compatible】2.5inch SSD / HDD and CD Driver with SATA / SATA2.0 / SATA3.0 interface, usb port fits for desktop, laptops, smart TV and OTG-enabled phones. | 【Convenient】Come with USB A to USB Type C adapter to meeting different computer needs. Please notice: Both sides of usb c interface can be connected, but only one side can reach the speed of usb 3.0, the other side is usb 2.0 speed. | 【Stable transmission】Adopt high-purity oxygen-free copper wire core, it is tinned to reduce signal loss, 10000 times plug test for each interface, ensure a stable performance.of high purity oxygen free copper as the transmission medium, tin plated processing, reduce the transmission loss, provide a stable signal transmission. | 【Plug&Play】USB3 SATA adapter support hot plug. Compact design, can be carry everywhere.

This mSATA to USB 3.0 adapter is suitable for those mSATA SSDs that have been eliminated after upgrade. It can be used as a USB flash drive to expand your external storage space for your Laptops or desktop computers. | Note: This adapter card only supports mSATA SSD (3cm*5cm), and does not support SATA Mini PCIE/PATA mini PCIE/RAID MINI PCIE SSD. Only fit for SSDs with current less than 1.5A. If it is a new hard disk, please format it before use, otherwise it may not be recognized by the computer. | Adopt ASM1153E chip, Great compatibility, it supports 512GB SSD and all major platforms with great stable signal and powerful power supply. | USB3.0 read and write speeds up to 200Mb/s +; Read and write speed with UASP can up to 400Mb/s +. Note: To achieve UASP acceleration, please make sure that your computer supports UASP. Currently, UASP-enabled systems include Win 8 and Mac OS 8&9 (the actual speed depends on your SSD speed.) | Directly plugged into the USB port of the PC, no USB cable is needed, the loss is reduced, the signal becomes more stable, and the power supply is more powerful.

【12cm USB Fan】: USB cooling fan, perfect for cooling various electronics and components, noise only 23dB (Low Speed) while working. | 【L/M/H Speed】: A speed controller is specially designed to control the airflow level. Meet your different needs. | 【High Quality】: Dual ball bearing have a lifespan of 45000 hours, 7 blades generate strong airflow to keep the cabinet stay cool. | 【Place Anywhere】: can be laid flat or stand upright. Great for narrow space: Laptop, receivers, AV electronics and game consoles... | 【Full Protection】: Aluminum grill on both side protect your hand or prevent damage cord when operating.

【8 High-quality solid capacitors】8 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4 capacitors, the graphics card power supply can be more stable and safe. The extension cord has a 6Pin interface to strengthen the power supply, effectively solving the problem of insufficient power supply capacity. | 【Metal graphics card slot】 The graphics card slot in the middle is a reinforced metal structure. Compared with the plastic bayonet, the metal bayonet has a tighter structure. The slot has a fixed buckle, which is convenient for removing and fixing the graphics card, so that the graphics card will not get out of the slot. Note: Please refer to Picture 3. Please pay attention to the direction of the graphics card during installation to prevent the graphics card from being burnt. | 【3 power supply methods】3 power supply methods are used: SATA power interface, 6Pin power interface (Double), and peripheral 4-pin power supply. The power can be plugged into any interface to work normally. The graphics card has an independent power supply to reduce the load on the motherboard. You can freely choose according to the actual use environment; At the same time, it is equipped with LED power indicator and working indicator, which can clearly check the power and working conditions. | 【Safety cable】Using (60CM) USB 3.0 gold-plated interface cable, which can improve connectivity, life and performance. As the latest expansion card in 2017 (2022), we are equipped with a stable cable to ensure signal integrity and support high loads during mining. | 【Strong compatibility】It has a wide range of compatibility and can be compatible with the motherboard 1x, 4x, 8x, 16x PCI-E slots, used for operating systems: Windows, Mac, Linux.

❤ Mini Cooling Fan: ELUTENG 40mm mini USB cooling fan with 3-speed control, size and super lightweight design, perfect fit for DIY cooling and narrow place. | ❤ 3 Speed Control: Voltage: 3.5/4.2/5V; Air volume: 3.5/3.88/4.4 CFM, different speed level for different cooling needs.***NOTE: Input power: Max 5V/1A. excess may damage the motor | ❤ Widely Used: Suitable for ventilation of VR glasses /TV box /Raspberry pie /Router /Small PC Case and other small electronic equipment ventilation. | ❤ High Quality: Metal grill on front side, protect cable and your hands; High quality bearings, durable; 100cm/3.3ft USB cable , meet connection needs.Please confirm the size by pics before purchasing. | ❤ USB Powered: 5V powered, allow you to use it in any places with USB power supply, convenient,perfect for Home/Office/Business trip.

ELUTENG 80mm dustproof cover can can reduce dust into computer chassis while cooling fan working, to keep inside of computer clean. | Nylon filter dust absorption up to 89%, reduce dust damage and extend fan life-span. | Dustproof cover can minimize fan noise to provide you a quiet environment.(Note: May affect air volume) | ABS resin material with strong heat resistance, washable nylon filter can be cleaned repeatedly. | Easy installation, only 6 steps, you can install it on your fan or other electronics.

2 IN 1 USB Fan 120mm, 2 fans connect to one USB cable and work at the same time. Perfect for cooling Receiver / AV cabint / Game console / PC / Laptop / TV Box / Projector / Router. | Features a 3-speed controller to adjust the fan’s speed to optimal noise and airflow levels. Lowest Noise: 27dB. Maximum Airflow: 56CFM. | USB-Powered fan, plug and play, very convenient. ***2 fan need enough power, not suggest connecting to USB hub. Power input Max 5V/1A, excess may damage the motor. | High quality dual ball bearing have a lifespan of 68,000 hours. Light & compact design perfect for narrow place, and its square design allows the fans to be laid flat or stand upright. | Black metal grill on both sides, protect your hands and cables when the usb fan working; Cable protective glue in the corner, wear-resistant and not easy to break. Any defective items please ask us for a replacement.

【40mm Mini Design】Product size is 40 * 40 * 25mm (exclude metal frame). With a design of mini and lightweight, this usb fan can be used in narrow places such as computer hosts, routers, etc. It can also be placed in a small gap on a desk or computer to cool down electronic products. Note: the 40mm fan is small and the speed will increase to achieve the heat dissipation effect, so some noise will be generated during use. | 【2 in 1 USB Fan】Compared to a single fan, the latest upgraded 2 in 1 dual usb fans can cool electronic products from different angles at the same time, which is more efficient. With a large air volume design and an external hard disk box, it can also cool electronic devices such as smart phones, game consoles and personal computers in a few seconds. | 【USB Power Supply, Plug and Play】USB power cable is plug and play. With a speed adjustment switch, there are 3 wind speeds for you to choose, the speeds are respectively L:4000 / M:4800 / H:5500rpm +/- 10% (×2), noise: L:23 / M:25.2 / H:27.3dB. The noise and air volume can be adjusted according to the use environment. Two fans can be connected to one USB cable and run at the same time to improve efficiency. | 【Double Ball Bearing Design & Long Service Life】Adopt high-quality double ball bearing motor, the service life is twice that of ordinary fans, and it can work continuously for a long time. Equipped with a metal frame and finger safety protection to prevent accidental injury during operation. | 【Wide Application】This usb pc fan is not only suitable for cooling equipment such as personal computers, routers and HDDs, but also suitable for AV equipment and game consoles. Simply connect to a device equipped with a USB terminal than can start cooling easily without cumbersome wiring.

【2 in 1 Dual Row 80mm USB Fan】ELUTENG dual row 8cm USB fan, USB powered, plug and play, can place the fan horizontally or vertically, ideal for cooling PC/Laptop/TV box/Receiver/Mobile phone/PS4 /Projector Instrument/ Router/Hard Drive Enclosure. 2 fans are connected together and run at the same time, the cooling effect is better. | 【3 Adjustable Wind Speeds】The latest upgraded 80mm silent fan has a 3-speed speed controller (low, medium and high) to control the wind speed. The speed is: 2050/2400/2750 rpm (×2) and the air volume is: 23.9/27.9/31.98 CFM (×2). Depending on the operating environment, you can choose between different wind speed levels. | 【Durable & Quiet】 Adopting hydraulic bearings and imported double ball bearings, it is very durable and has a long service life. The noise level is 25.6dB (weak) to 32.5dB (strong), so you can use it flat or upright in a quiet place such as library or study. In addition, the noise does not increase with the use time and it can work continuously for 24 hours. | 【Multiple Protection】The bottom is equipped with 4 removable rubber shock absorbers for more convenient use, safer, more stable and reliable. Metal grids are used on both sides to prevent the blade from hurting your fingers and damaging the wire when working. The corner joint is equipped with cable protection glue, which is wear-resistant, not easy to break, and is safer and more reliable to use. | 【Wide Practicality】Size: 0.8 x 0.8 x 0.25cm(×2); Cable length: 1 m. It is not only suitable for cooling devices such as PCs, routers and hard drives, but also AV devices and game consoles. Just plug in any device equipped with a USB port to start cooling without the hassle of wiring.

【2 in 1 Dual Row 120mm USB Fan】ELUTENG dual row 12cm USB fan, USB powered, plug and play, can place the fan horizontally or vertically, ideal for cooling PC/Laptop/TV box/Receiver/Mobile phone/PS4 /Projector Instrument/ Router/Hard Drive Enclosure. 2 fans are connected together and run at the same time, the cooling effect is better. | 【3 Adjustable Wind Speeds】The latest upgraded 120mm silent fan has a 3-speed speed controller (low, medium and high) to control the wind speed. The speed is: 900/1200 /1500rpm (×2）and the air volume is: 23.9 / 27.9 / 31.98 CFM（×2）. Depending on the operating environment, you can choose between different wind speed levels. | 【Durable & Quiet】 Adopting hydraulic bearings and imported double ball bearings, it is very durable and has a long service life. The noise level is 25.6dB (weak) to 32.5dB (strong), so you can use it flat or upright in a quiet place such as library or study. In addition, the noise does not increase with the use time and it can work continuously for 24 hours. | 【Multiple Protection】The bottom is equipped with 4 removable rubber shock absorbers for more convenient use, safer, more stable and reliable. Metal grids are used on both sides to prevent the blade from hurting your fingers and damaging the wire when working. The corner joint is equipped with cable protection glue, which is wear-resistant, not easy to break, and is safer and more reliable to use. | 【Wide Practicality】Size: 12 x 12 x 2.5cm(×2); Cable length: 1 m. It is not only suitable for cooling devices such as PCs, routers and hard drives, but also AV devices and game consoles. Just plug in any device equipped with a USB port to start cooling without the hassle of wiring.

The adapter is compatible with ROG Ally Gaming 2230 NVME to 2280 NVME extension, it can't convert NVME to SATA, also can't convert SATA to NVME. | Operation method: 1st step: the 2280 SSD hard disk to be replaced into the expansion board card, ready for the operation of the system cloning. 2nd step: boot into the system, connect the hard disk, and open DiskGenius, use the "system migration" function will be the original hard disk system disk cloning to the new hard disk. | The 90 degree design fits into the body of the ROG ALLY smart handheld device,which provides higher transfer speeds and larger storage capacity to meet users' needs for high speed, high capacity storage. | If you have just collected your Ally handheld games console and would like to expand its storage or have found yourself running out of space for your library of games. Once installed, you can enjoy up to 8TB of space. | Note: M.2 NGFF hard drives are not supported. The installation of this expansion board card requires a certain degree of technical and operational skills, which is recommended to install and use it under the guidance of professionals.

ELUTENG HD SDI to HDMI Converter, convert SDI signal to HDMI signal at max 100m. | Input SDI format: SD-SDI / HD-SDI / 3G-SDI, up to 2.97Gb/s SDI transmission at max 100m input distance. | HDMI1.4, compatible with HDMI1.2/1.1, support full HD 1080P@60HZ, embedded audio and video & audio syn output. | This SDI HDMI Converter support all devices with SDI output and monitor with HDMI input *** different cable and signal strength will affect transmission distance. | Plug and play, easy to install and operate, metal shell reduce external disturbance. *** Need external power supply.

【Reliable Heat Sink】Both PS5 SSD Heatsinks are available for the M.2 2280 SSD. Including a screw fixing heat sink, rubber band fixing heat sink, screws, rubber ring and thermal silicone pad. Compatible with Samsung 850 EVO SSD and more. if you get red one accidentally,please contact us to get extra reward. | 【Double-Sided Quick Cooling】 Groove design M.2 2280 heatsink, greatly increase the heat dissipation area, with 10°C - 25°C cooling effect (Varies depending on the environments), cooling the M.2 SSD to a safe temperature quickly and improving the performance of your computer. | 【Phase Change Thermal Conductivity Technology】 The use of high-coefficient phase change thermal silicon wafers greatly improves thermal conductivity. Long-term use of phase change materials, thermal conductivity will be better. | 【Durable Material】 Alloy aluminum oxidation greatly improves the corrosion resistance, hardness, wear resistance, insulation, heat resistance of the NGFF NVME cooler, and prolongs the service life. | 【Easy to install】 Make precise and close fitting, easy to install, and not damage the hard disk.

【Custom PS5 SSD Heatsink】 The new M.2 NVME SSD heatsink is specially designed for PlayStation 5, and its exterior design is perfectly compatible with PS5. Please note that this PS5 cooler does not support PC computers or laptops or other devices! | 【Wide Compatibility】PS5 cooler is compatible with Gen4 PCIe NVMe 4.0 SSD. For example, Western Digital SN850, Samsung 980 PRO, WD_BLACK SN850 RGB, Kioxia SE10, Lexar NM800 or other Gen4 PCIe NVMe 4.0 SSD, etc. (Note: SSD read speed: 5,500MB/sec or higher is recommended, a hard drive with this read performance will have a better gaming experience). | 【Made of High-quality Materials】The high-quality magnesium-aluminum alloy material will have stronger heat dissipation performance than other ordinary aluminum alloy materials, which can reduce the temperature of the SSD hard disk by 10°C - 30°C (depending on the environment), which can help your PS5 achieves better cooling effect. So as to bring you better gaming enjoyment. | 【Easy to Install & Durable】With just a few simple steps, you can easily and quickly install it with the toolset inside the PS5 cooler in minutes! At the same time, it is made of high-quality magnesium-aluminum alloy material, which has been carefully designed and manufactured, so the wear resistance and durability are very good. | 【Complete Accessories】Package list: 1* PS5 M.2 SSD heatsink; 4 * silicone thermal pads; 1* screwdriver. To quickly transfer heat from the M.2 SSD to the PS5 heatsink, a thermal pad is placed between the M.2 SSD and the M.2 heatsink. It has low viscosity, thermal conductivity and insulating properties.

【M2 SDD to SATA Adapter】 Easily convert ngff SATA Key B / B+M ssd to a external 7+15 pin solid state drive card, add extra storage space for your laptop and desktop. | 【Notice】NOT support any PCIe NVMe / AHCI Key M SSD. If you have a brand new ssd, please format the ssd before use. Otherwise, it may not be recognized by the computer. | 【Support M2 SSD】2280 / 2260 / 2242 / 2230mm M.2 NGFF(SATA) SSD, and sata 3 interface with max transfer rate up to 6Gbps. | 【Stable Transmission】Adopt large capacity capacitance, high power LDO Control chip, ensure more stable performance, and enjoy faster transmission. Note: 6GBPS is the theoretical transfer speed, the actual transfer speed depends on the SSD and the performance of the computer interface. | 【Easy installation】No driver required. Any questions about m.2 sata converter, please feel free to contact us. Note: The installed screwdriver is randomly matched, it may be black or green. Package: M2 to SATA Drive Converter Card * 1 Screwdriver * 1 Screws * 1

【M.2 NGFF and MSATA to SATA】M.2(NGFF) and MSATA dual purpose 2-in-1 to SATA 3.0 with external hard drive case with solid state SSD. Connect SATA3.0 transfer interface, toggle switch can be inserted into two SSDs at the same time for use, toggle the switch up when reading NGFF HDD, toggle the switch down when reading MSATA HDD. Used as portable SSD. suitable for B-key, B/M-key. | 【Widely compatible】 Suitable for size 2230/2242/ 2260/2280 NGFF HDD fixed, i.e. support 30mm, 42mm, 60mm, 80mm M.2 NGFF SSD. support M.2 NGFF or MSATA SSD conversion to SATA2.5"/3.5" HDD use, compatible with PCI-E M.2 protocol and SATA3.1 standard. (Note: NVME and AHCI protocols are not supported) | 【Support a variety of systems】Sync with the latest modern technology, support a variety of new and old computer system engines. Wide range of applications, Win Xp Win7 Win8 Win10 Server Vista MAC OC Linux and other systems can be connected to this product for use. No need to consider product matching. | 【High-speed transmission performance】Based on SATA3.0 external output interface, theoretical transmission speed up to 6Gbps. fast transmission speed, high efficiency of use. Shorter software startup time, faster file transfer, plug and play, entertainment and office is one step faster. | 【High quality compact hard drive casing】The casing made of high quality material does not get hot when the product is operating, dissipates heat quickly, fully protects the inner important electronic parts, and maximizes the potential high performance of the SSD. Drop and wear resistant to reduce impact. 100*70mm specifications. Easy to carry around. Small size, suitable for storage in school bags, briefcases.

NGFF/NVMe dual-protocol M.2 SSD hard disk enclosure, combined into one, compatible with M.2 two different protocol hard disks, supporting 2230/2242/2260/2280 specifications M.2 NGFF (SATA) and NVMe protocol M.2 SSD Solid-state hard drives and NVMe hard drive enclosures only support M key and B+M key; using Realtek RTL9210B 10Gbps high-end master control solution, there is no need to configure two additional hard drive enclosures, saving you time, effort, money and worry | High speed & stability: External USB3.1 GEN2 USB Type-C output interface, NVMe protocol can theoretically support up to 10Gbps transfer rate, SATA protocol can theoretically support up to 5Gbps transfer rate; greatly improve the efficiency of reading and writing, and accelerate the transfer of large files. Caton; RTL10B main control escort, with UASP and TRIM functions, can reduce CPU load, reduce consumption, faster and more durable | 4-fold heat dissipation protection hard disk: PCBA plate copper strip, transfer hard disk heat without blocking; heat dissipation silicone grease, post core design, stable heat dissipation; fish fin pattern upper cover, increase surface heat conduction area; metal shell, timely export internal heat; multiple methods Let the heat be transferred to the shell in time to dissipate, avoid damaging the hard disk. | Energy saving and environmental protection: support hot swap, plug and play. Support smart hibernation technology, (being idle for 10 minutes to enter hibernation) energy saving and environmental protection, and improve the service life of the hard disk. LED indicator monitoring, monitoring the working status of the hard disk at any time. The shell is made of high-quality aluminum alloy(But not Pure aluminum material), which is stylish without losing texture, abrasion and scratch resistance | Widely used: equipped with USB Type-A to Type-C and USB Type-C to Type-C data cables (0.15m), fully compatible with Window / Mac OS / Linux multi-platform operating systems. It is suitable for connecting PCs, smart phones, laptops, smart TVs, smart routers, PS4 and other devices. Max Support 4TB capacity, small size, practical lanyard hole design, easy to carry

【NGFF to SATA3.0】 M.2 NGFF SSD to SATA conversion adapter for 2230/ 2242/ 2260/ 2280mm size M.2 hard disks, B key and B+M key are supported. Note: Only M.2/NGFF is supported. *Note: Only M.2/NGFF is supported. | 【Faster Transmission Performance】 M.2 NGFF case is a SATA3.0 external transfer interface that provides a theoretical maximum transfer rate of 6Gbps. Note: Transfer speeds are affected by device configuration and SSD performance and may deviate from theoretical data. Please be aware that there may be deviations from theoretical data. | 【Application】 You can use it directly with an external hard drive cage using an easy-drive cable or install it in the hard drive bay of a host computer or laptop. | 【Easy Installation】 Faster plug-and-play, no additional drivers required, and lightweight for easy portability. | 【Precautions】 Only M.2 NGFF SATA SSDs are supported, NVME and PCI-E SSDs are not supported, two SSDs must be connected for simultaneous use, SSDs will be re-initialized upon first use, please back up your hard drive data before use, when using, two When in use, a JBOD is formed between the two hard disks.

【Double-Sided Quick Cooling】 Groove design ssd heatsink m.2 nvme, greatly increase the heat dissipation area, with 10°C - 25°C cooling effect (varies depending on the environments), cooling the M.2 SSD to a safe temperature quickly and improving the performance of your computer. | 【Durable Material】 Alloy aluminum oxidation greatly improves the corrosion resistance, hardness, wear resistance, insulation, heat resistance of the nvme heatsink low profile, and prolongs the service life. | 【Unique Dual Installation Solution】 Metal clips + rubber bands for m.2 heatsink ps5 installation. No need to worry about rubber bands material aging or SSD long time high-temperature operation. | 【With a Thermal Pad】 To conduct heat from M.2 SSD to ps5 slim ssd heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. Thermal pads are low viscosity, thermally conductive and insulating. | 【Widely Used】 Compatible with heat sink for m.2 ssd, size about 0.87 x 3.15in (22 x 80mm), M.2SSD/ NGFF SSD/ NVME SSD/SSD etc. can be used perfectly. | 【4pcs】Our ssd heatsink m.2 nvme can get 4 pieces of NVMe radiators with 4 thermal silicone pads and 8 black rubber bands with one purchase. | 【Service Guarantee】If you have any questions about our m.2 2280 nvme cooler, please feel free to contact us, and our service team will answer or solve your questions at any time.

【M.2 to PCIE Adapter Card】This adapter card supports 2230/2242/2260/2280/22110 size M.2 PCIE (NVMe) M-Key / B&M key SSD.*Note: Can not correspond to M.2 NGFF (SATA), NVME specification PCI-e protocol SSD requires Win10 support to read the disk. | 【Wide Compatibility Support】PCIe 4X / 8X / 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key / B&M-key. *Note: Not support PCI-E 1x, PCI slot. Not applicable to MSATA and B KEY interface. | 【High Speed Transfer】The M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum read/write speed of 32Gb/s (theoretical value), greatly reducing the transfer time of large files. ※Note: The actual transmission speed depends on the interface and working environment of the device. | 【Safety and Stability】The adapter card uses solid state capacitors for voltage stabilization, which can avoid current wave damage to SSD and work stably in high and low temperatures to protect the hard drive. The thickened gold-plated fingers have good durability.M.2 to PCIE adapter card size: 140*35mm (L*M), corresponding to Windows 7/10/11 system. win8 or above system does not need driver, win7 and below SSD need driver. | 【Effective Heat Dissipation】The M.2 to PCIE adapter card has a double-sided copper strip plus multi-hole heat dissipation structure to reduce the temperature generated by the SSD during operation and stabilize its performance, thus extending the life of the hard drive.

【Compatible with M.2 NVME and NGFF (SATA)】Eluteng NGFF/NVME compatible hard drive enclosure, M.2 corresponds to two different hard drives. It supports M.2 NVME or NGFF (SATA) in 2230/2242/2260/2280mm sizes. Compatible with B-key, M-key and B+M-key. Meet the needs of different scenarios and save time, effort and money by eliminating the need to deploy two additional hard drives! Note: PCI-E AHCI protocol is not supported. | 【High Speed & Stability】The external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol and 5 Gbps for NGFF protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using RTL9210B chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability. | 【4TB large capacity】Up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems. | 【Heat Dissipation Design】 PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature. | 【Easy to use】 NGFF/NVME compatible. Comes with screws and screwdriver, easy to install M.2 NVME and NGFF (SATA), easy to use and portable.

【PCIE to M.2 adapter】Compatible with 2230/2242/2260/2280 M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting. | 【Support List】Expansion card support: PCIe 4X / 8X / 16X, M-Key/B&M-key PCIE to M.2 adapter. *Note: PCI-E 1x and PCI slots are not supported; MSATA and B-KEY interfaces are not supported. | 【High-speed Transfer】The adapter uses the NVMe protocol and PCI-E lanes, the maximum read speed reaches 32 Gbp/s (theoretical speed). This greatly reduces the transfer time for large files. *Note: The actual transfer speed depends on the device interface and working environment. | 【Safe and Stable】Solid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system. | 【Effective Heat Dissipation】Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.

【Compatible with M.2 NVME】Eluteng NVME compatible hard drive enclosure, it supports M.2 NVME in 2230/2242/2260/2280mm sizes, compatible with M-key(Not for B-Key and B&M-Key). Note: M.2 NGFF, PCI-E AHCI protocol is not supported. | 【High Speed & Stability】The external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using JMS583 chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability. | 【4TB large Capacity】Up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems. | 【Heat Dissipation Design】 PCBA board surface is processed with copper rod to prevent abnormal heat generation of the product. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature. | 【Easy to use】 M.2 NVME compatible. Comes with screws and screwdriver, easy to install and portable.

【PCIE NVME adapter】Compatible with M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting. | 【Effective Heat Dissipation】Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive. | 【Wide Compatibility Support】PCIe 1X 4X / 8X / 16X. M.2 NVME to PCIE adapter card, corresponding to M-Key / B&M-key. *Note: Not support MSATA and B KEY interface. | 【High Speed Transfer】The M.2 to PCIE adapter card uses NVMe protocol and takes the PCI-E channel, with a maximum read/write speed of 16Gb/s (theoretical value), greatly reducing the transfer time of large files. ※Note: The actual transmission speed depends on the interface and working environment of the device. | 【Safe and Stable】Solid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.

Raspberry Pi 3 Case, suitable for Raspberry Pi B + / 2 / 3 motherboard installation, ABS injection molding, durable, effectively protect your Raspberry Pi. | Raspberry Pi Mounting Kit, equipped with 2pin fan and 3 aluminum heat sinks, great cooling effect, protect chip and extend using life. | Raspberry Pi 3 Cover with ON/OFF Switch, easy to control Pi; Opening GPIO position, plug GPIO pin without opening box; Reserved camera cable hole; | Raspberry Pi Enclosure, Adopt card buckle fixing design, easy to install; Equipped with screwdriver and screws, easy operation to fix Raspberry Pi. | Fully equipped to meet your needs, package including: ABS Raspberry Pi Shell / 3 heat sinks / 1 2pin fan / 1 USB to Micro USB data cable / 1 HDMI to HDMI cable / 1 screwdriver / 8 screws.

【Notice！！！】Making sure your USB-C or Thunderbolt 3 port support video output so that it can work. In addition,when You Use The USBC-HDMI Adapter with USB Hub,Please Make Sure Your USB Hub Support Video Output,Otherwise It won't work. The product has been inspected, if you have any questions about use, please contact us. | 【USB C to HDMI Adapter】 Connect this usb c to hdmi adapter to the USB C cable, and then connect to the HDMI port of the TV or projector to convert from a Macbook to a large screen display. Note: This usb-c to hdmi adapter can only be transmitted in one direction, USB C input, HDMI output. This adapter requires an extra USB C to C cable. | 【4K@60hz/2K@144Hz】 USB Type C to HDMI adapter, supports the highest resolution 4K@60Hz. Enjoy your favorite games and videos on the big screen. | 【Aluminum Alloy Shell】 The usbc to hdmi adapter adopts a gold-plated interface with a sturdy aluminum alloy shell for faster heat dissipation, more stable transmission and longer service life. | 【Easy to Carry】Type C to HDMI Coupler, light and compact, is very suitable for meetings and presentations. Note: This product requires a USB 3.1 to USB 3.1 standard cable.

3-Speed: ELUTENG USB cooling fan with speed control, High Speed (2900RPM, 30dBA) ,Medium Speed (2500RPM,25dBA), Low Speed(2000RPM,23dBA). | 5V USB Computer Fan: Max 33CFM and 7 blade generate strong airflow to keep your devices cooling.NOTE: Power input Max 5V/1A, excess may damage the motor.This cooling fan body height is 25mm,plus the thickness of the two sides of the net covers is about 35mm. | Long Lifetime: With high quality Motor and Dual Ball Bearing, to ensure stable rotating speed and expand lifetime. | Black metal grill on both sides, prevent injury to your hand and keep cable without damage by blade; Cable protective glue in the corner, wear-resistant and not easy to break. | USB Powered Fan: plug and play, no tool needed, perfect for TV Box, Router, Xbox PlayStation or Computer.