Package Dimensions: 7.62 cms (L) x 8.128 cms (W) x 7.62 cms (H) | Product Type: Security Camera | Package Quantity: 1 | Country Of Origin: United States

Ruggedized weatherproof keypad for indoor/outdoor | 120 Users | Easy to program at the keypad | Built-in assignable sounder | Metal braille alpha-numeric keys

IEI 212w

IEI Linear Corp | Keyless Access | IEI Linear Corp IEI 212i Style Flush Mount Indoor Keypad (0-211111) | 212i - 0-211111

【High Performance Gigabit Switch】This 10-port Ethernet switch uses the latest high-speed and low-power consumption Ethernet chip,only 2.5W in full load conditions.Gigabit that Saves Energy Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money.(Note: It's not PoE Switch) | 【Easy to Use,Plug & Play】Unmanaged network switches are very simple to operate, plug and play.Each port supports MDI/MDIX auto-flip and duplex/rate auto-negotiation. Easy setup with no software installation or configuration needed.The Ethernet splitter supports normal mode and VLAN mode switching. | 【Safer and reliable】IEEE 802.3X flow control provides reliable data transfer.The Ethernet switch uses a small metal shell to support desktop or wall mount. The unmanaged switch adopts multi-layer baking varnish low-temperature process, which can adapt to the bad environment of 5℃-50℃, does not rust, and is corrosion-resistant. Fanless design, always working quietly. | 【4KV Lightning Protection】This series Ethernet splitter designed with lightning protection, it can withstand 4000 volts or more lightning, and prevent circuit failure. Built-in protection circuit. When a short circuit or overload occurs, the port will automatically fuse to protect the safe operation of the switch and other ports. | 【Wide application range】This Ethernet switch is widely and fully compatible,applicable to IP monitoring and wireless AP equipment, shopping malls, communities, schools, hospitals, parks, hotels, small and medium-sized enterprises, etc. | 【Warranty】 We are committed to providing customers with quality services, you can enjoy 12-month warranty. At the same time, if you have any questions for our network swithch, please feel free to contact us.

【High Performance Gigabit Switch】This 5-port Ethernet switch uses the latest high-speed and low-power consumption Ethernet chip,only 2.5W in full load conditions.Gigabit that Saves Energy Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money.(Note: It's not PoE Switch) | 【Easy to Use,Plug & Play】Unmanaged network switches are very simple to operate, plug and play.Each port supports MDI/MDIX auto-flip and duplex/rate auto-negotiation. Easy setup with no software installation or configuration needed | 【Safer and reliable】IEEE 802.3X flow control provides reliable data transfer.The Ethernet switch uses a small metal shell to support desktop or wall mount. The unmanaged switch adopts multi-layer baking varnish low-temperature process, which can adapt to the bad environment of 5℃-50℃, does not rust, and is corrosion-resistant. Fanless design, always working quietly. | 【4KV Lightning Protection】This series Ethernet splitter designed with lightning protection, it can withstand 4000 volts or more lightning, and prevent circuit failure. Built-in protection circuit. When a short circuit or overload occurs, the port will automatically fuse to protect the safe operation of the switch and other ports. | 【Wide application range】This Ethernet switch is widely and fully compatible,applicable to IP monitoring and wireless AP equipment, shopping malls, communities, schools, hospitals, parks, hotels, small and medium-sized enterprises, etc. | 【Warranty】 We are committed to providing customers with quality services, you can enjoy 12-month warranty. At the same time, if you have any questions for our network swithch, please feel free to contact us.

◯ [5 Ports Gigabit Network Switch]: 5*1000M Ethernet port with auto-negotiation function and Auto MDI/MDIX, without separated uplink ports, each port can be uplink ports. (Note: It's not PoE Switch) | ◯ [Plug and Play]: Simple setup with no software to install or configuration needed. Each port supports MDI/MDIX auto-flip and duplex/rate auto-negotiation. And with no configuration necessary making it's perfect for home/small office and small-medium businesses. | ◯ [4KV Lightning Protection]: It designed with lightning protection, it can withstand 4000 volts or more lightning, and prevent circuit failure. Built-in protection circuit. When a short circuit or overload occurs, the port will automatically fuse to protect the safe operation of the switch and other ports. | ◯ [Tiny Size Design]: The size of this 5 ports gigabit switch in inch only 3.92 x 2.01 x 1.06, small and inconspicuous design, saving space, it doesn't affect the beauty of the room due to body size. | ◯ [Metal Case and Fanless Design]: The metal body has excellent resistance to falling, and most accidental falls will not affect the functional use of the switch. The fanless design does not generate noise and also has good heat dissipation performance. The normal operating temperature range is - 10 to 55 ℃, which is safe and worry-free. | ◯ [Multi-scenario and Large-scale Application]: This series of unmanaged switches are fast ethernet switches designed for high-forwarding network environments such as schools, families, SMEs and mini-monitoring.

This cable replaces Olympus CB-USB5, CB-USB6 and CB-USB8 camera cables. This is NOT compatible with all Olympus cameras. Please check compatibility list below before buying. Please contact ienza if you have any questions. This cable is also known as: Olympus Stylus Tough Charger. This cable connects your digital camera to USB-ready computer, USB hub or photo printer dock for pictures transferring. | This works with Olympus Stylus Tough TG-620 iHS, TG-630 iHS , TG-830 iHS, TG-850, TG-860, TG-870, Stylus 5010, 7030, 7040, DZ-105, SH-1, SH-2, SH-21, SH-50, SH-60, SZ-16, SZ-17, TG-1, TG-3, TG-4, TG-310, TG-320, TG-610, TG-620, TG-630, TG-805, TG-810, TG-820, TG-835, TG-850, TG-860, X-940, X-960, XZ-1, XZ-2, XZ-10 Digital Cameras. | Also compatible with Olympus FE-4020, FE-4030, FE-4040, FE-5030, Mju 7040, Mju 7050, Mju 9010, Tough 3000, 6020, 8010, SP-100, SP-100EE, SP-620UZ, SP-720UZ, SP-800UZ, SP-810UZ, SZ-10, SZ-11, SZ-12, SZ-14, SZ-20, SZ-30MR, SZ-31MR. Also compatible with OM-D E-M1, OM-D E-M10 Mark II, OM-D E-M5 Mark II, PEN E-PL7, PEN E-PL8. | Replaces: Olympus Tough TG-860 TG-870 USB Cable USB Data SYNC-Charge Charging Cable Cord for Olympus Stylus Tough TG 860 TG 870 Camera. Works with Olympus model C170, C180, C480, C500 Zoom, C5500, C7000, C-170, C-180, C-480, C-500 Zoom, C-5500 SportZoom, C-7000. Also known as: Camera cord to computer Olympus Stylus Tough Charger, USB Cable For Image Transfer Supports Charging in Selected models Olympus CB-USB5 CB-USB6 USB Cable Cord Lead. | ienza is a registered trademark and a registered Amazon brand. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

Compatible with Logitech C920x HD Pro Webcam, Full HD 1080p/30fps Video Calling. Compatible with Logitech C920 Hd Pro Webcam. Compatible with Logitech HD Pro Webcam C920 Widescreen Video Calling and Recording Webcam. | Compatible with Logitech C930e Webcam. Compatible with Logitech C922 Pro Stream Webcam 1080P Camera for HD Video Streaming. Compatible with Logitech Privacy Cover for C920 and C930e. | This webcam cover conveniently blocks your camera cover to protect your privacy. | This also compatible with other popular webcams. This is also known as webcam lid, webcam cap, webcam protector, web camera privacy cover. | ienza is a registered trademark and a registered Amazon brand. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs

IMPORTANT NOTES: 1. This is not compatible with the newest (late 2019 and newer) versions of Kindle products. 2. Power adapter not included. This 10-foot long USB to micro USB power or charge cable will allow you to use your Amazon Kindle devices while being charged. To check compatibility with your device, please contact ienza. | Premium quality USB to Micro-USB Cable (works with most Micro-USB Tablets and electronic devices). Works with virtually all Amazon devices with a Micro USB port. This cable is a great replacement for “Amazon 5ft USB to Micro-USB Cable (works with most Micro-USB Tablets)”. Replaces “Official Amazoncom replacement for the USB cable that comes in-box with Kindle Fire, Kindle Fire HD 7", and Kindle Fire HD 8.9." | For use with all Kindle tablets and e-readers. Works with “Amazon 5W USB Official OEM Charger and Power Adapter for Fire Tablets and Kindle eReaders.” Work with “Official Amazon 5W, 1A power adapter compatible with most devices with a micro-USB port, although charging times may vary”. Also known as: Kindle USB Charging Cable, Amazon Kindle Paperwhite USB Cable, Kindle Fire USB Charging Cable, Kindle Paperwhite Charger, Echo Dot USB Cable | For Belkin Extra Long 10-Foot Micro USB Cable. Micro USB Cable for Amazon Alexa charging cable cord [10ft]. For Amazon Alexa All-New Fire HD 8 HD 10 Tablet , Fire TV Stick Paperwhite Echo Dot Fire 7 with Alexa ,Amazon Echo Kindle Voyage E-reader. This cable can also compatible with Xbox One and PS4 Playstation 4 controllers. Other applications: Fire TV Stick USB Power Cable, All New Fire TV USB Power Cable | ienza is a registered trademark. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

APPLICATION: This cable is used to download images from your camera using the USB port on your computer. Mac and PC compatible. Also known as: 1. uc-e16 usb cable, 2.uc-e16 usb cable nikon | COMPATIBLE WITH: Nikon Digital SLR DSLR D3200, D3300, D5000, D5100, D5200, D5300, D5500, D7100, D7200, D750, Df; Nikon 1 S2 1S2, 1 V1 1V1; Coolpix P100, P330, P500, P510, P520, P530, P6000, P7000, P7100, P7800, P90 | ALSO COMPATIBLE WITH: Nikon COOLPIX A, A10, A100, A300, AW100, AW110, B500, L100, L110, L120, L23, L27, L28, L29, L30, L31, L32, L320, L330, L340, L620, L810, L820, L830, L840 | ALSO COMPATIBLE WITH: Nikon COOLPIX S01, S02, S1000pj, S230, S2800, S2900, S3000, S31, S3100, S32, S3300, S3500, S3600, S3700, S4000, S4100, S4150, S4200, S4300, S5200, S6000, S6100, S6200, S6300, S640, S6400, S6500, S6700, S8000, S800c, S8100, S8200, S9200, S9300, S9400, S9500 | TRADEMARK: Use ienza trademark without the prior written consent of ienza, LLC. constitutes trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed and marketed as cost effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

USE: This cable is used to download images from your camera using the USB port on your computer. Mac and PC compatible. Also known as: 1. uc-e4 usb cable, 2. UC-E4 USB Cable For Nikon D3100 Camera, And USB Computer Cord For Nikon D3100 | COMPATIBLE WITH: Nikon Digital SLR DSLR D300, D3000, D300S, D3100, D3S, D3X, D40, D50, D70, D700, D7000, D70s, D80, D90, D4, D4S, D600, D610 | ALSO COMPATIBLE WITH: Nikon 1 AW1, 1 J3 1J3, 1 S1 1S1, 1 V2 1V2, 1 J1 1J1, 1 J2 1J2 | TRADEMARK: Use ienza trademark without the prior written consent of ienza, LLC. constitutes trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed and marketed as cost effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

This cable will allow you to connect your standard TRS (3-pole) 3.5mm microphone plug on to your TRRS (4-pole) iPhone, Android devices and other electronic devices that requires a TRRS input. This cable replaces Rode and Movo cables : SC4 3 inches Microphone Cable and MC3 3.5mm TRS (Female) Microphone Adapter Cable to TRRS (Male) for iPhone & Android Smartphones. | This is designed to allow microphones with a 3.5mm TRS output to connect to TRRS smartphones and tablets such as iPhone, iPad, Android devices and other devices that requires a TRRS input. This is great for users wanting to connect their Movo or RØDE VideoMic to their iPhone, other Smartphones. | Configuration: 3.5mm TRRS (Tip Ring Ring Sleeve, 4-Pole) Male to TRS Female. Designed to allow microphones with a 3.5mm output to connect to TRRS smartphones and tablets. Ideal for users wanting to connect their RØDE VideoMic to their iPhone. | IMPORTANT NOTE: If you are using an iPhone with no 3.5mm jack (i.e., iPhone X), make sure that you are using the original Apple lightning to 3.5mm adapter (or an equivalent adapters that can be connected to a microphone). Most replacement lightning to 3.5mm adapters are not capable of connecting to a microphone. Similarly, if you are using an Android device with no 3.5mm jack, make sure that you are using a USB C to 3.5mm adapter that can be connected to a microphone. | ienza is a registered trademark. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

This cable is used for transferring picture from your Sony Alpha a6000 Mirrorless Digital Camera to your PC, laptop or Mac. This is also compatible with Sony Alpha 6000, 7, 68, 5000, 5100, 6300, 6500, 77II, 7IIK, 99II, Cybershot DSCHX200V, DSCHX400, DSCHX80, DSC-RX10, DSCRX100, DSCWX220, DSCWX300, DSCHX300 | Also compatible with the following Sony Camera models: ILCE-7/ILCE-7R, ILCA-68, Alpha ILCE-5000, ILCE-5100, ILCE-6000 No, Alpha ILCE-6300, Alpha ILCE-6500, ILCA-77M2, ILCE-7M2K, ILCA-99M2, DSC-HX200/HX200V, DSC-HX400 / HX400V, DSC-HX80, DSC-RX10, DSC-RX100, DSC-WX220, DSC-WX300, DSC-HX300 | NOTE: If your Sony camera model is not listed above, please contact us, ienza, to assist you in determining what cable you need. | ienza is a registered trademark. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

COMPATIBLE WITH: Sony Cybershot Cyber-shot DSCH200 , DSCH300 , DSCW370, DSCW800, DSCW830, DSC-H200 , DSC-H300 , DSC-W370, DSC-W800, DSC-W830, DSC-W180 | This NOT compatible with all Sony camera models. If your camera model is not listed above, please contact the seller, ienza. | This cable is compatible with the Sony Cybershot models listed above. For other Sony camera models, please contact the seller, ienza. | USE: High-quality USB Charge Photo Picture PC Computer Transfer Cable Coded for select Sony and Cybershot Cyber-shot camera models. Camera to PC Computer USB Photo Picture Cable Cord, Charge Cable | ienza is a registered trademark. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

This product is also known as: DMW-USBC1 Panasonic Lumix 8-Pin USB Camera Cable Cord, LUMIZ Photo Picture PC Transfer USB Cable, Lumix Camera to PC Mac Transfer Cable, USB Image Transfer Battery Charging Via USB Cable. Compatible with: Lumix DMC-F2, DMC-FH25, DMC-FH4, DMC-FH5, DMC-FH6, DMC-FH7, DMC-FH8, DMC-FP5, DMC-FP7, DMC-FP8, DMC-FS12, DMC-FS14, DMC-FS16, DMC-FS18, DMC-FS20, DMC-FS22, DMC-FS25, DMC-FS28. | Compatible with: Panasonic Lumix DMC-FS3, DMC-FS30, DMC-FS33, DMC-FS35, DMC-FS37, DMC-FS40, DMC-FS41, DMC-FS45, DMC-FS5, DMC-FS62, DMC-FS7, DMC-FT20, DMC-FT25, DMC-FT3, DMC-FT5, DMC-FX01, DMC-FX07, DMC-FX10, DMC-FX100, DMC-FX12, DMC-FX150, DMC-FX2, DMC-FX3, DMC-FX30, DMC-FX33, DMC-FX35, DMC-FX37, DMC-FX40, DMC-FX48, DMC-FX50, DMC-FX500, DMC-FX55, DMC-FX550, DMC-FX580, DMC-FX60, DMC-FX65, DMC-FX66, DMC-FX7, DMC-FX700, DMC-FX77, DMC-FX78. | Also compatible with: Panasonic Lumix DMC-FX8, DMC-FX80, DMC-FX9, DMC-FX90, DMC-FZ1, DMC-FZ10, DMC-FZ15, DMC-FZ150, DMC-FZ18, DMC-FZ2, DMC-FZ20, DMC-FZ200, DMC-FZ28, DMC-FZ3, DMC-FZ4, DMC-FZ47, DMC-FZ48, DMC-FZ5, DMC-FZ50, DMC-FZ60, DMC-FZ62, DMC-FZ7, DMC-FZ70, DMC-FZ72, DMC-G1, DMC-G10, DMC-G2, DMC-G3, DMC-G5, DMC-G6, DMC-GF1, DMC-GF3, DMC-GH3, DMC-GH4, DMC-GM1, DMC-GX1, DMC-GX7. | Also compatible with: Panasonic Lumix DMC-L10, DMC-LS1, DMC-LS2, DMC-LS3, DMC-LS6, DMC-LS70, DMC-LS75, DMC-LS80, DMC-LS85, DMC-LX1, DMC-LX2, DMC-LX3, DMC-LX5, DMC-LX7, DMC-LZ1, DMC-LZ10, DMC-LZ2, DMC-LZ3, DMC-LZ30, DMC-LZ4, DMC-LZ40, DMC-LZ5, DMC-LZ6, DMC-LZ7, DMC-LZ8, DMC-S1, DMC-S2, DMC-S3, DMC-S5, DMC-SZ02, DMC-SZ1, DMC-SZ5, DMC-SZ7, DMC-SZ8, DMC-SZ9, DMC-TS20, DMC-TS3, DMC-TZ1, DMC-TZ2, DMC-TZ3, DMC-TZ4, DMC-TZ5 | TRADEMARK: ienza is a registered trademark. Use of the ienza trademark without the prior written consent of ienza, LLC. may constitute trademark infringement and unfair competition in violation of federal and state laws. ienza products are developed as cost-effective alternatives to OEM parts. They are not necessarily endorsed by the OEMs.

IMPORTANT Note: This is a USB-C Type C cable compatible with Texas Instruments Calculators, TI-84 Plus, TI-84 Plus C Silver Edition, TI 89 Titanium, TI Nspire CX/TI Nspire CX CAS Graphing Calculators | APPLICATION: This is used to charge or connect your calculator using the USB-C Type C port available in new PC or laptops | This is compatible with PC, Laptop, Mac and Chromebooks with a USB-C port. | USB C charge cable for TI 84 Plus, TI 84 Plus C Silver Edition, TI 89 Titanium, TI Nspire CX & CX CAS graphing calculators.

3.5mm aux Plug allows any device with 3.5mm aux output to be plugged in, enabling playback through any car's stereo system with a built-in Cassette Deck | Stereo playback | Universal compatibility | 4ft cable provides ample reach

Converts standard 24 pin ATX power supply connector to 8 pin power supply connecter | Connector A: 24 pin ATX Power Supply | Connector B: 8 pin DELL motherboards H61 H81 Q77 Q87 B75 A75 Q75 Q65 | Compatible with Optiplex 3020 7020 9020 and Precision T1700 models | Recommended to be installed by professional technicians

IET Lamps only use original manufacturer OEM bulbs inside. | IET Lamps housing units are made from durable and high quality materials and are guaranteed to fit properly. This lamp will meet the original manufacturer quality and performance standards. | Last 3x longer then Generic lamps! Better Reliability, Brighter Picture, Longer Lasting. | Lamp Part Number: V13H010L69 | One Year Warranty. 30 Days Money Back Guarantee.

IET Lamps only use original manufacturer OEM bulbs inside. | IET Lamps housing units are made from durable and high quality materials and are guaranteed to fit properly. This lamp will meet the original manufacturer quality and performance standards. | Last 3x longer then Generic lamps! Better Reliability, Brighter Picture, Longer Lasting. | Lamp Part Number: V13H010L89 | 180 Days Warranty. 30 Days Money Back Guarantee.

❤【Sealing rubber ring for enhanced cooling】:The seal ring and blower are designed to create superior cooling.Suitable for 14-17 inch laptops, the best choice for gaming laptop cooling. | ❤【Air filtration is effective against dust】:It comes with two air filters to prevent dust from building inside the laptop. The filter is easy to disassemble and clean. | ❤【Seven-color lighting】:It has seven colors of light, four light modes, and the lights can be turned off. | ❤【Bracket height adjustable】:Ergonomically designed, the height of the stand can be adjusted to avoid damage to the spine. | ❤【Third gear speed】:It has three kinds of wind speed adjustment. When playing, the high-speed gear has good cooling effect, and the low-speed gear in office is energy-saving and environmentally friendly.

1.Package Included: 20 Cable Clips, with 5 Different Size 3.5mm/ 5mm/ 7mm/ 9mm/ 13 mm inner diameter. | 2.Ferrite Core with Plastic Housing; Helps to Reduce EMI on AC Power Lines. | 3.Widely Used on a Variety of Data Cables, e.g. USB Cables, Telephone Lines, Aerial Feed, Satellite Cables, Network Cables to Shield from External Electromagnetic Interference;Reduce Electro-magnetic Interference and Improve Signal Integrity. | 4. Clip-on Design, Easy to Install and Change. | 5. All Pieces Come in a Reusable Transparent Box, Easy to store.

1.Package Included: 20 Cable Clips, with 5 Different Size 3.5mm/ 5mm/ 7mm/ 9mm/ 13 mm inner diameter. | 2.Ferrite Core with Plastic Housing; Helps to Reduce EMI on AC Power Lines. | 3.Widely Used on a Variety of Data Cables, e.g. USB Cables, Telephone Lines, Aerial Feed, Satellite Cables, Network Cables to Shield from External Electromagnetic Interference;Reduce Electro-magnetic Interference and I

✔ Anti Dust Cover for RJ45 Female Jack | ✔ Material : Silicone; Color : Black; Net Weight : 110g | ✔ Over Size : 12 x 10 x 7mm/0.5'' x 0.4'' X 0.28"(L*W*H) | ✔ Protect RJ45 Female Jack from Dust and Oxygen | ✔ Package Content : 100 Pcs x RJ45 Anti-dust Cover

Anti Dust Cover for RJ45 Female Jack | Material : Silicone; Color : Black;Net Weight : 15g | Over Size : 12 mm x 10 mm x 7 mm /0.5'' x 0.4'' x 0.28"(L*W*H) | Protect RJ45 Female Jack from Dust and oxygen | Package Content : 25 Pcs RJ45 Anti Dust Cover

✔ Anti Dust Cover for RJ45 Female Jack | ✔ Over Size : 12 x 10 x 7mm/0.5'' x 0.4'' X 0.28"(L*W*H); | ✔ Protect RJ45 Female Jack from Dust and Oxygen | ✔ Material : Silicone; Color : Black; Net Weight : 55g | ✔ Package: 50 Pcs RJ45 Anti-dust Covers

Universal Compatibility: Compatible with all series and models of Mac mini/Mac studio, perfectly fitting the device. | Dustproof and Ventilated: Effective dust prevention, while maintaining a certain degree of ventilation, can effectively prevent 99.9% of dust and yarn. | Easy Maintenance: No need for troublesome cleaning and maintenance, come with two spare dustproof sponges that can be easily replaced at any time. (Filter replacement depends on the environment. Normally, replace every six months. Unused sponges should be sealed to prevent oxidation) | Minimalist Design: We have designed various styles and ultimately chose this minimalist design, which has a large air contact area. Among all products on the market, this product has the best ventilation. | Anti-Slip Silicone Corners: Four corners are designed with anti slip silicone to prevent device from sliding on the stand.

AVOID OVERHEAT: Unique heat dissipation structure effectively allows better air ventilation to keep device cool, which extend the service life of device. | SAVE SPACE ON DESK: This is a sturdy mount, that will easily hold the your device either on a wall, under a desk or back of monitor, which freed up space on your desk, add to aesthetics of the whole space. | ANTI-SCRATCH DESIGN:The silicone anti-scratch inner pad protects your device from scratches and hold the device in, which prevents it slipping right out. | PERFECT PROTECTION: With hard aluminum alloy material and wrap design, it never rust and perfectly protects your device away from kids or accidental damage. | COMPATIBLE: It is perfectly compatible with Apple Mac mini 2011, 2012, 2014, 2018, 2020 M1, 2023 M2, Compatible VESA 75mm & 100mm. M4 Screws, drywall anchors included. | NOTES: The side WITH Mac mini logo face towards the bracket when insert the device(This means that the side WITH the Apple logo faces outward), this will create a snug fit and prevent gaps from forming.

MAXIMIZE YOUR DESK SPACE: Free up your desk space with our under desk laptop holder! Suitable for laptops and almost any device that is less than 38mm / 1.5" thick, including laptop, Mac Mini, Macbook, Cable box, Modems, sony playstation 4 slim, Smart TV Boxes, and more. | PROTECTION FOR YOUR DEVICES: Our anti-scratch silicone pads protect your devices from scratches while the non-slip surface helps prevent accidental slippage. | SLEEK MINIMALIST DESIGN: Our under desk laptop mount ergonomic storage solution is a minimalistic and stylish way to store your laptop under your desk, making the most out of the wasted space underneath. | BUILT TO LAST: The under desk holder is made of hard aluminium, and the screws (5/8") are made of premium stainless steel. They are easy to install, reusable, and not easy to be damaged. | EASY INSTALLATION: Installing this under desk laptop holder is a breeze! Simply place your laptop in the holder and tear off the auxiliary adhesive sticker, paste the whole under any desk (desk at lest 3/4" thick). Use a power tool secure each bracket with included screws. The large hole design allows your drill to easily go through the mount to install.

MAXIMIZE YOUR DESK SPACE: Free up your desk space with our under desk laptop holder! Suitable for laptops and almost any device that is less than 38mm / 1.5" thick, including Mac Mini, Macbook, Cable box, Modems, sony playstation 4 slim, Smart TV Boxes, and more. | PROTECTION FOR YOUR DEVICES: Our anti-scratch silicone pads protect your devices from scratches while the non-slip surface helps prevent accidental slippage. | SLEEK MINIMALIST DESIGN: Our under desk laptop mount ergonomic storage solution is a minimalistic and stylish way to store your laptop under your desk, making the most out of the wasted space underneath. | BUILT TO LAST: The under desk holder is made of hard aluminium, and the screws (5/8") are made of premium stainless steel. They are easy to install, reusable, and not easy to be damaged. | EASY INSTALLATION: Installing this under desk laptop holder is a breeze! Simply place your laptop in the holder and tear off the auxiliary adhesive sticker, paste the whole under any desk (desk at lest 3/4" thick). Use a power tool secure each bracket with included screws. The large hole design allows your drill to easily go through the mount to install.

ACTIVE NOISE CANCELLATION - The AC iPurifier creates an incredibly quiet noise floor from your AC power lines and was designed to be used in ANY mains powered audio / video system while it reduces noise without audible side effects and does not hinder dynamics | REDUCES HUM - It only actively provides an earth/ground if your system needs one and will not create a ground loop reduces hum or buzz issues on A/V systems with no ground or earth (additional cable required to connect ground to your audio chain) | WORKS IN ANY SETUP - Where extension blocks, power strips, extension cords, surge protectors, or outlet extenders are used, the AC iPurifier can be used to isolate certain types of power supplies for the maximum noise reduction and the design is such that it is even more effective if several are used to ‘contain’ the same type of noisy sources so try in different locations to discover which has offers the most improved sonics | SURGE PROTECTION - It protects from voltage surges so if it detects a power surge from the power receptacle it will automatically cut off, protecting your valuable and highly sensitive equipment in parallel from harm | FOR ANY AUDIO SYSTEM - Perfect for use in systems at home, office or professional settings and is truly a remarkable product in systems such as home theaters, listening rooms, turntable setups, recording studios, or anywhere you would want to benefit from an easy way to experience better sound

PORTABLE DESIGN - Your music will never stop with up to 6 hrs of battery life and a slim, lightweight design perfect for carrying in your pocket wherever life takes you | HIGH RESOLUTION AUDIO - From Spotify to Tidal MQA to MP3 and beyond, play any high res audio format with native digital to analog conversion so you can listen to any song the way the original recording was intended | POWERFUL AMPLIFIER - Suited to your style, listen to in ear monitors or drive over the ear headphones with 400 mW max power output from the on-board amplifier | EASY CONNECTIVITY – Connects directly to your smartphone with the USB Input, and works with balanced 4.4mm or S-Bal 3.5mm headphone plugs for ultimate convenience and versatility | HIGH TECH – Power Match and XBass offer adjustable analog enhancements to customize your listening experience without compromising the digital conversion

? UPGRADE YOUR SYSTEM - With this state-of-the-art compact Digital Analogue Converter for home audio, office, or desktop use, you will hear a difference and clarity in your audio system whether you use speakers or headphones | ? EASY CONNECTIVITY - Connect via USB3.0 (USB2.0 compatible) input from your USB source such as a computer or Digital Audio Player (DAP). Output to headphones, active speakers, or amplifier with 6.3mm Unbalanced / 4.4mm Balanced / RCA connections | ? HIGH RESOLUTION AUDIO - Hear familiar songs in a whole new light with rich detail and warm natural tones created by the Burr Brown True Native digital to analogue converter which can process any hi-res audio format up to PCM 384kHz/24 bit, DSD256, DXD 384kHz, and decodes MQA all without additional conversion so you can listen exactly as the artist intended. | ? TECH PACKED - With technology like: Variable analogue volume control, PowerMatch adjustment for iEMs/On & Over Ears, and TrueBass to add bass to iEMs and a new and improve low jitter clock with >20dB improved performance, you can listen to your music with smoother, cleaner, playback. | ? NOTE ? - Due to the analogue volume control used there may be a slight channel imbalance under 9 o'clock on the volume dial. This is not a fault with the product. We advise to listen to your music between 11 & 1 o'clock for the best sound quality.

Adhesive Strips compatible with 21.5" iMacs from Late 2012 through 2019. | Essential for repairs that require removing the display like a broken hinge or glass replacement. | Kit includes: Opening Wheel to easily separate the front panel from the body of the computer.

This complete set of replacement adhesive strips is specifically cut to be compatible with 27" iMacs from Late 2012 to 2019 and the iMac Pro. | The individual adhesive strips are labeled to indicate their correct location as shown in the replacement guides. | Kit Contents: New Adhesive Strips compatible with iMac Intel 27" (2012-2019), iMac Opening Wheel | Compatible with iMac Intel 27" A1419 Late 2012 to 2015, iMac Intel 27" Retina 5K Display 2019 A2115 EMC 3194.

Open adhesive assembled devices with smooth glass, metal or plastic top and bottom surfaces. | Advanced opening tool with opposed suction cups and controlled spreading force. Infinitely adjustable opening force. | Apply just enough force then let time do the work, hands-free! The Anti-Clamp keeps up the spreading force while you wait. | Quick and easy application and quick release using the slide nut. Get adjustable spreading force without an expensive pro-level tool. | Covered by iFixit's Lifetime Warranty.

COMPLETE: This set contains a variety of tools - Besides various opening tools, it includes 16 precision bits (4 mm) and a precision screwdriver with a magnetic bit socket, knurled grip, and swivel top for easy operation. | STARTER SET: You want to replace a broken screen or battery in your smartphone? This toolkit provides the necessary tools for a basic electronic repair. Compatible with Apple, Samsung, Huawei, Sony and many more devices! | FUNCTIONAL: Thanks to the foam insert and magnetic closure of the case, tools, components and bits can be safely stored and transported. Additionally, the inside of the lid serves as a sorting tray. | MUST-HAVE: This tool-set was designed to repair any smartphone, game console, tablet, PC, etc. It also serves for most household DIY fixes. | IFIXIT QUALITY: These 16 precision-bits (4 mm) are made of high-quality S2 steel. The precisely machined bits fit properly into the screws and protect both the bit and the fasteners from damages. All tools are ESD safe.

HEAVY DUTY: Pair of 2.25 inch diameter (57 mm) locking suction cups for firmly securing the screen display on tech devices like tablets, desktop PC's, smartphones, and more! | PRACTICAL: Specially formulated rubber foot holds stronger and longer. Heavy duty locking handles with latch. | ESSENTIAL: These suction cups are absolutely needed for reducing repair time. | SAFE DESIGN: Use these suction cups to safely lift and remove glass and display assemblies from devices. Intended for electronic device repairs only. | IFIXIT QUALITY: We specifically designed these suction cups to be compatible for iMac repair. Covered by iFixit's Lifetime Warranty.

LOOSEN ADHESIVE: This separator is designed to apply heat directly and evenly to screens to loosen the adhesive for removal during DIY repair. | UNIVERSAL: Made for iPad, but also works with many tablets, iPhones, Android phones, PC laptops, or other electronics needing heat temperature application in the disassembly process. | COMPLETE: Fix Kit includes tools that are commonly used for repairs that involve use of the iOpener. | SAFE: Repair with confidence! This iOpener is easy-to-use, non-toxic, and food-safe. | IFIXIT QUALITY: Covered by iFixit's Lifetime Warranty.