Support international standard IEEE802.3 af(13W); POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af. | 12V 1A power output, easy to access Poe network for non-PoE terminal | Support 37V-57V voltage transmission, Automatically detects power supply from PSE power supply module. PD module industrial grade temperature and lightning protection, 7000 hours high frequency low resistance long life capacitor. | Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection. 1500V high voltage isolation. | Overvoltage Protection, Short Circuit Protection, Overcurrent Protection, Overheating Protection.
【Convert Non-PoE to PoE】PoE+ injector 30W/52V can Convert Non-PoE to PoE ,you can easily have PoE enabled With no need to replace your existing non-PoE switch/device | 【IEEE802.3af/at PoE Compliant 】PoE adapter supplies power and data via one single ethernet cable to PoE devices and expands network to areas with no power lines or outlets | 【Gigabit PoE Injector】 1 Gigabit Ethernet Input Port + 1 Gigabit Ethernet Output port , Support 10/100/1000Mbps of data speed,protect output against over voltage, over current, short circuit | 【Long Range Transmission】PoE power supply Connect with normal switch to exchange data, provide sustained and stable power through Cat5e/Cat6 cable to remote PD, effective distance is 100meters(328 feet) | 【Plug and Play】Easy setup with no software installation or configuration needed, perfect for IP cameras or access point deployment in large areas
Auto sensing technology delivers Up to 30W of power over ethernet, Supplies PoE (15.4W) or PoE+ (30W) Power | Converts a non-PoE Gigabit port to a PoE+ Gigabit port, Network a PoE device located up to 120 meters (390 ft.) away via Full Duplex Gigabit speeds | Integrated power supply for all-in-one design, 1 Gigabit Ethernet port input and 1 PoE+ Gigabit ethernet port output. | Plug and Play, no configuration is needed,simply connect a PoE device, accommodates most installations scenarios | Compact and cost-effective POE+ injector Compatible with most Gigabit IP camera, IP phone, Wireless IP point and other Gigabit PoE devices.
【2 Gigabit Ports】This PoE injector include 1× Gigabit Ethernet Input Port, and 1× Gigabit Ethernet Output port with PoE power. Max 1000 Mbps with excellent data performance. | 【90W 802.3at/af/bt】The PoE Port support IEEE802.3af(15.4W), IEEE802.3at(30W), IEEE802.3bt(90W), max output 90W, With 3 LED lights to display the power status, automatic detection of equipment and output required power, no forced power supply, no damage to the equipment. Please note that no power will be supplied to passive 24V devices | 【Plug and Play】Just connect the power cord, the 2 port connect to network equipment and POE equipment, no configuration required to work normally | 【Long Range】Transmit data and power on the single network cable up to 100 meters(328ft.), perfect for PoE equipment can be flexibly installed in a larger area | 【Widely Used】Metal case, with hanging ears, suppport wall-mount install, can be connected to PoE camera, ap, etc., widely used in home, business, shop, private networks and other PoE fields. Especially suitable for high-power POE equipment
Compatible with IEEE802.3af and IEEE802.3at and IEEE802.3at 4Pairs | Extends the range of PoE and Ethernet an additional 100 meters No additional power supply is required | Automatically detects and protects PoE equipments from being damaged by incorrect installation | Full-rate network throughout the whole extended distance Wall-Mountable design.Easy plug-and-play installation | EMI standards complies with FCC, CE class B
【Stable & Reliable】The Ethernet server network adapter equipped with the original BCM5719 controller chip, by providing unparalleled features of virtualization, flexible features, and proven reliable performance, upgrades to servers or workstations in need of enhanced performance, advanced features, and greater reliability. | 【Convert PCIe Slot to Quad RJ45 Port】Equipped with RJ45 port which can set up a long-distance link with a file server or a remote workstation, up to 100m of CAT5/CAT6/CAT7 connection meeting the demands of data center environments. Improve computer network utilization, network bandwidth, and network control ability. | 【High Performance】Provides fully compliant 10/100/1000 RJ-45 Ethernet port through each PCIe slot, meeting the demands of data center environments, PCIe v2.1 ( 2.5GT and 5.0GT/s) x4 Lane compatible with PCIE X4, X8, X16 Slot, the network card provides an effective upgrade or replacement network port. | 【Easy Installation】Come with Low-profile and full-height brackets, meet different computer or server case needs, add an additional Ethernet port to a workstation or server computer for redundancy. | 【Wide Compatibility】Support Windows 7/8/10/Vista, Windows Server 2008/2012/2016, Linux, FreeBSD, VMware ESX. | 【Driver Install Require】The Ethernet server network adapter comes with a driver CD, or please download the driver from Broadcom website.
Widely compatible with Cisco, Meraki, Ubiquiti UniFi, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Broadcom, Linksys and other open switches | Data Rate: 1.25Gb/s; Connector: RJ-45 Copper | Cabling: Cat 5e/6/6a. It supports links up to 100m using Cat.5e Cable | Plug and Play, Hot Pluggable SFP MSA Compliant, IEEE Std 802.3 and 802.3ab Compliant | Each transceiver is individually tested on switch to make sure 100% compatible before delivery
❤【1000M Dual SC Fiber Port】 Built-in 1000Mbps Single-mode Fiber Module with dual SC ports, link Single-mode Dual SC Fiber cable, SMF, 1310nm, up to 20 km (12.42 miles). | ❤【10/100/1000M RJ45 Port】Provide speed up to 1000Mbps stable Eternet connection, downward compatible with 10/100 Mbps, Supports Full Duplex or Half Duplex, Support MDI/MDI-X auto crossover. | ❤【Plug and Play】 Just plug in Optical port and RJ45 port, and will work immediately. Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x, Supports jumbo frame size 9K byte. | ❤【Sturdy and Durable】High-quality chip provides lightning protection, strong anti-interference ability. 2 sides Cooling holes and Metal Case for better heat dissipation performance and durable. | ❤【What you get】 1x Gigabit SC to RJ45 Media Converter, 1x external power supply, 1x Product Manual. Enjoy 30-day free-returned and 2-year warranty service.
Support international standard IEEE802.3 af; POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af. | 5V/3A power output using Type-C, the Type-C port only for power-charging. | PD support 44V - 57V voltage transmission, Automatically detects power supply from PSE power supply module. | Support the isolation circuit protection, can effectively protect electrical equipment; Support the short circuit, overvoltage protection | TypeC POE Splitter base on IEEE802.3af standard. It can separate the power and data via cable transmission.Proper matching use with poe switch or PSE injector which meet standard IEEE802.3af,Provides power and data at the same time for the terminal device does not support PoE.
1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds. | Auto-sensing technology delivers up to 60W to a PoE+ device with backwards compatibility for 802.3bt(60w), 802.3at(30w) and 802.3af PoE (15.4W) devices. | Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away. | Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios. | High Performance Gigabit PoE+ / PoE injector, IEEE 802.3at / 802.3af compliant. Pin Assignment and Polarity: 1/2 (-), 3/6 (+),4/5(+), 7/8(-)
🔩【𝐖𝐢𝐭𝐡 𝟐 𝐁𝐫𝐚𝐜𝐤𝐞𝐭 𝐌𝐨𝐮𝐧𝐭 Wide Application】Wireless Bridge-CPE366 coming with TWO Wall Mount Kit is consist of an interchangeable mounting adapter which makes it compatible for wireless bridge. This mount can easily fit into a window as well as wall and are vertically and horizontally adjustable. The two adjustable points make the mount versatile in adjusting the wireless bridge to the exact position. | 🚀【With 𝟏𝟎𝟎𝐌𝐛𝐩𝐬 𝐚𝐧𝐝 𝟏𝟎𝟎𝟎𝐌𝐛𝐩𝐬 Two LAN Ports】Outdoor Wireless WiFi Bridge Equipped with 1000M Ethernet port.Support Dynamic MIMO power saving mode (DMPS) and APSD,it provides higher speed for all users to ensure that you have access to better WiFi service.You can connect your home to an outbuilding without either professional expertise or a ditch witch and a spool of burial-grade cable.It can quickly establish a PTP & PTMP connection. | 🌌【3KM Transmission Distance】Point to Point Bridge with a 𝟏𝟔𝐝𝐁𝐢 𝐡𝐢𝐠𝐡-𝐠𝐚𝐢𝐧 𝐚𝐧𝐭𝐞𝐧𝐧𝐚, PTP WiFi distance up to 3000 meters,which greatly improves the coverage and WiFi signal stablity.It is recommended for Factory, Warehouse, Golf Course, Car Park, Lake etc. | 🏤【Multiple Applicable Scenarios】 CPE-366 with 𝐏𝐓𝐏(Point to Point), 𝐏𝐓𝐌𝐏(Point to Multi-Point), AP and Bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial.5G outdoor CPE supports AP/repeater operation mode and PoE/DC power(DC power not included) supply mode to meet a variety of long-distance wireless transmission needs,such as buildings, factories, rural areas, construction sites, squares, elevators and other places. | ❤️【Reliable Warranty Service】𝐆𝐢𝐠𝐚𝐛𝐢𝐭 𝐖𝐢𝐫𝐞𝐥𝐞𝐬𝐬 𝐁𝐫𝐢𝐝𝐠𝐞 uses dustproof and waterproof shell, all-weather sunscreen, waterproof, dustproof seal design can be used in various outdoor Working in the various weather conditions for stable performance.The wireless bridge CPE has a 30-day money-back guarantee and month free replacement,1-year manufacturer warranty and professional technical support.If you need any help, pls contact us.
【What N620 is】KuWFi N620 is an 900Mbps Outdoor Wireless WiFi Bridge support 5KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection,900Mbps High Speed & NAT High Conversion Rate with Multiple power supply methods N620 comply with 802.11A/N/AN/AC technology to provide up to 900Mbps wireless access speed,and high NAT conversion rate of over 93% to achieve faster download/upload speed, making online surfing faster | 【Simple & Efficient Pairing】 No Need to be professional nor have a computer, matching the host & subordinative bridge just by setting the Nixie tube the same number (within 8 points). two units with same Digital number mean paired it is a wifi bridge with low power consumption, strong security. With PTP, PTMP, bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial. | 【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcastingSupport DHCP server; WiFi coverage before 2 houses with 5KM distance | 【Multi operation mode: Bridge mode( Master/Slave).】Geteway mode With operation of Bridge mode ,it can Bridge wifi signal with one place to other place in 5Km disatnce , then share with others. no need to access into GUI. with Geteway mode work with Broadband account password. | Considerations:Master CPE :The CPE 1000M Lan port conenct to POE adapter POE port,The POE Lan Port conenct to PC network cable , and CPE 100M connect to other router have internet service. Slave CPE :The CPE 1000M Lan port conenct to POE adapter POE port,The POE Lan Port conenct to PC this two unit should be have internet service. please donnot use 100M to conenct POE , it will be damage
Supports 3rd Gen AMD Ryzen Processors AMD AM4 Socket | Dual Channel DDR4, 2 DIMMs | Optimized VRM Heatsink | Direct 6 Phases Digital PWM with 55A DrMOS | PCIe 3.0 x16 Slot.1x NVMe PCIe 3.0 x4 M.2 Slot.ALC887 Audio Codec.Blazing Fast 1GbE LAN.Intel Dual Band AC WiFi and Bluetooth with Ultra Durable Antenna.Rear DP and 2x HDMI Support
Supports AMD Ryzen 5000 Series / 3rd Gen Ryzen and 3rd Gen Ryzen with Radeon Graphics Processors | 4x Dual Channel ECC/ Non-ECC Unbuffered DDR4 | 10+3 Phases Digital Twin Power Design with Low RDS(on) MOSFETs | Dual Ultra-Fast NVMe PCIe 4.0/3.0 x4 M.2 Connectors | Front USB 3.2 Gen1 Type-C and HDMI & DVI-D for Multiple Display
Supports AMD 3rd Gen Ryzen/ 2nd Gen Ryzen/ 1st Gen Ryzen/ 2nd Gen Ryzen with Radeon Vega Graphics/ 1st Gen Ryzen with Radeon Vega Graphics/ Athlon with Radeon Vega Graphics Processors | Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs | Feature Digital VRM Solution with Low RDS(on) MOSFETs | HDMI, DVI-D Ports for Multiple Display | Ultra-Fast PCIe Gen3 x4 M.2 with PCIe NVMe & SATA mode support | High Quality Audio Capacitors and Audio Noise Guard with LED Trace Path Lighting | GIGABYTE Exclusive 8118 Gaming LAN with Bandwidth Management | RGB Fusion supports RGB LED Strips in 7-Colors | Smart Fan 5 Features 5 Temperature Sensors and 2 Hybrid Fan Headers with FAN STOP | APP Center Including EasyTune and Cloud Station Utilities
Supports 3rd Gen AMD Ryzen Processors.Wireless Communication module: Bluetooth 5 | Dual Channel Non-ECC Unbuffered DDR4, 2 DIMMs | Direct 8 Phases Digital Power with 90A Smart Power Stage | Advanced Thermal Design with Extended & Multi-Layered Heatsink and Thermal Baseplate | Ultra Durable PCIe 4.0 Ready x16 Slot | Dual Ultra-Fast NVMe PCIe 4.0/3.0 x 4M. 2 with Thermal Guard | Onboard Intel WiFi 6 802.11ax 2T2R & BT5 with AORUS Antenna | AMP-UP Audio with ALC1220-VB and Nichicon Audio Capacitors for Rear 120dB SNR | Blazing Fast 2.5GbE LAN with Bandwidth Management | USB 3.2 Gen2 Type-C & DisplayPort plus Dual HDMI Support
AMD AM5 Socket: Supports AMD Ryzen 7000 Series Processors | 5-Year Warranty | DDR5 Compatible: 4SMD DIMMs with AMD EXPO and Intel XMP Memory Module Support | Unparalleled Performance: Direct 8plus2plus1 Phases Digital VRM Solution | Advanced Thermal Design and M.2 Thermal Guard: To Ensure VRM Power Stability and M.2 SSD Performance | Stable Connectivity: 3PCIe 4.0 x4 M.2, USB 3.2 Gen 2x2 Type-C | Fast Networking: 2.5GbE LAN, AMD Wi-Fi 6E | Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED and RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPUUnparalleled Performance:Direct 8plus2plus1 Phases Digital VRM Solution