Laptop screws kit | Sizes: M2 M2.5 M3 | Color: Silver | Perfect for PC case, power supply, motherboard, hard drives, fan and floppy/CD-ROM/DVD-ROM drives fixed installation, they are placed in a box, easy to find and use!

Laptop screws kit | Sizes: M2 M2.5 M3 | Color: Black | Perfect for PC case, power supply, motherboard, hard drives, fan and floppy/CD-ROM/DVD-ROM drives fixed installation, they are placed in a box, easy to find and use!

Includes 2 pieces black anodized aluminum heatsink. | Pre-applied 3M 8810 thermal conductive adhesive tape backing. | Can be applied for passive cooling of Water cooling modules, 3D printers stepper motor, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc. | Dimension: 3.15 x 1.57 x 0.43 inch / 80mm x 40mm x 11mm (L*W*H). | Unit Weight: 1.2 oz / 35 gram per piece.

Includes 2 pieces black anodized aluminum heatsink. | Pre-applied thermal conductive adhesive tape backing. | Can be applied for passive cooling of Water cooling modules, 3D printers stepper motor, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc. | Dimension: 3.9 x 1.57 x 0.78 inch / 100 x 40 x 20 mm (L*W*H). | Unit Weight: 2.7 oz / 75 gram per piece.

30 sets complete insulator/mounting kit for Heatsink power semiconductor packages. | 30 pcs TO-220 insulation kits: Screw + Washer + Bushing and Insulator rubberized silicone. | Can be used for Voltage Regulator Transistor MOSFET LM317 L7805 L7806 L7808 L7809 L7810 L7812 L7815 L7818 L7824 IRFZ44N IRF510N IRF520N IRF530N IRF540N IRF640N IRF740 IRF840 IRF3205 IRF9540 IRF Series etc | TO-220 Heatsink is not included.

Includes 30 pieces black anodized aluminum heatsink | 10 gram Thermal conductive adhesive gllue with strong adhesion included. | Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc. | Dimension:0.55 x 0.55 x 0.28 inch / 14mm x 14mm x 7mm (L*W*H) | Weight: 0.056 OZ / 1.6 gr per piece

Includes 30 pieces aluminum 3D printer heatsink. | Pre-applied 3M 8810 thermal conductive adhesive tape backing | Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208 | Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece | Stepper motor driver module is not included.

4 packs complete TO-3 heatsink insulator/mounting kit for TO-3 Heatsink power semiconductor packages. | 4pcs TO-3 insulator kit: Heatsink + Screw + Nuts + Washer + Bushing and Insulator rubberized silicone. | Can be used for Voltage Regulator Transistor MOSFET etc | Heatsink size: 1.8x1.8x0.54 inch / 45mmx45mmx14mm | To-3 heatsink unit weight: 0.9 oz / 25 gram

40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc | Fan specifications: Ball bearing, speed 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC | Fan dimension: 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm. | Heatsink dimension: 40x40x11mm, Adhesive thermal pad dimension: 40x40x0.5mm. | Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc thermal pad, 1 metal grill, screw mouthing screw nut set.

Includes anodized aluminum heatsink | Pre-applied thermal conductive adhesive tape backing | Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc. | Dimension: 1.57 x 1.57 x 0.44 inch / 40 x 40 x 11mm (L*W*H) | Weight: 0.6 oz / 17 gr per pc

40mm anodized aluminum heatsink | Pre-applied 3M 8810 thermal conductive double side adhesive tape backing | Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc. | Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x11mm (L*W*H) | Weight: 0.6 oz / 17 gr per pc

Includes 40pcs copper pad shim, low profile 20mm x 20mm / 0.8 x 0.8 inches, in 6 thicknesses. | Includes 7pcs of these thicknesses: 0.3mm, 0.5mm, 0.8mm, 1mm. | Includes 6pcs of these thicknesses: 1.2mm, 1.5mm | [Main Body Material: Copper]. Thermal conductivity: 401W/mK; can be applied for gap filler in thermal heat sink and cooling of the Development Boards Laptop GPU VGA VRAM RAM IC Chips PS5 M.2 NVMe SSD, etc

Suitable for Raspberry Pi 4 B, 3 B+, 3, 2, A, B, B+ boards | Includes 30pcs black anodized aluminum + 10pcs copper heatsink | Pre-applied 3M 8810 Thermal conductive adhesive tape backing | Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge , Northbridge etc | Raspberry pi not included.

4 pack of 120mm black finger grills. | Includes fan mounting screws. | Made to fit standard 120mm square fans.

4 pack of 50mm black finger grills. | Includes fan mounting screws. | Made to fit standard 50mm square fans. | Color: Black.

4 pieces 50mm black anodized aluminum heatsink kit. | Pre-applied 3M 8810 thermal conductive double side adhesive tape backing | Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc. | Dimension: 1.97 x 1.97 x 0.79 inch / 50x50x20mm (L*W*H) | Weight: 1.9 oz / 52 gr per unit

4 pack of 92mm black finger grills. | Includes fan mounting screws. | Made to fit standard 92mm square fans.

Thermal conductivity > 6.5 W/m-k. | Thermal resistance 0.0016 k-in/W. | Working Temperature: -30/280°c. | Each pack includes 1 gram high performance thermal paste/grease. | Can be applied for cooling the interface of heatsink and CPU GPU IC Chips, etc.

Dimension: 0.236 x 0.236 x 0.196 inch / 6mm x 6mm x 5mm (L*W*H) | Includes 10pcs 6mm copper heatsink | Pre applied 3M 8810 thermal conductive adhesive tape backing | Can be applied for passive cooling GPU, small IC chips, VRM Stepper Driver MOSFET VRam Regulators Laptop PC 3D printer Stepper Driver Motor

6 Pieces Aluminum Heat Sink | Size: 4" x 1" x 0.4"/100mm*25mm*10mm (L*W*H) | Unit weight : 33g | Can be used for cooling LED, Power IC and Transistors, etc

72pcs Graphic Card Heatsink Screw Mount, GPU Spring Screws, Graphics Card Back Plate Heatsink Screws Fasteners | Package includes 12pcs: M2x6.3, M2x6.8, M2x8, M2x9, M2x9.5, M2x12.

72pcs Graphic Card Heatsink Screw Mount, GPU Spring Screws, Graphics Card Back Plate Heatsink Screws | Package includes 12pcs: M2x6.8, M2.5x7.5, M2.5x9, M2.5x9.5, M2.5x10, M2.5x11.

Universal computer case cooling fan mounting screws | Fits for 70mm, 80mm, 90mm, 92mm, 120mm, 140mm computer case fan | Self tapping design, very easy to use | High grade carbon steel, durable and useful | Standard flat head, Phillips head screw

PS5 and Laptop Memory SSD NVMe m.2 2280 copper heatsink kit. | [Main Body Material: Copper]. Thermal conductivity: 401W/mK; Dimension: 76mmx22mmx1mm/ 3.03' x 0.86' x 0.04' (L*W*T); Weight: 0.32 oz 14 gram. | [Greatly increase the heat dissipation area], Special design for cooling your Laptop RAM to a safe temp to avoid overheating and throttling, improve your computer's performance. | [Unique High Performance Thermal Tape]: Nano thermal tape for efficient heat conductivity. | Each pack includes: 1 piece Laptop m.2 2280 copper heatsink + Nano thermal pad in two thicknesses 70x22x1mm and 70x22x0.5mm.

Laptop Memory NVMe SSD m.2 2280 copper heatsink kit. | [Main Body Material: Copper]. Thermal conductivity: 401W/mK; Dimension: 77mmx22mmx1mm/ 3.03' x 0.86' x 0.04' (L*W*T); Weight: 0.32 oz 14 gram. | [Greatly increase the heat dissipation area], Special design for cooling your Laptop RAM to a safe temp to avoid overheating and throttling, improve your computer's performance. | [Unique High Performance Thermal Tape]: Nano thermal tape for efficient heat conductivity. | Each pack includes: 1 piece Laptop M2 2280 copper heatsink + High performance Nano thermal pad in two thicknesses 70x22x1mm and 70x22x0.5mm.

Suitable for Raspberry Pi 4 B, 3 B+ boards | Includes 4 pcs copper heatsink | 3M 8810 thermal conductive adhesive tape backing | Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc | Raspberry pi not included.

Suitable for Raspberry Pi 4 B, 3 B+, 3, 2, A, B, B+ boards | Includes 1pc 25mm quite fan and 3pcs aluminum + 1pc copper pad shim heatsink | Heatsinks are pre-applied thermal conductive adhesive tape backing | Fans are with One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC) Low noise (15.92dBA), Long life (30,000 hours) | Raspberry pi not included

Raspberry pi 4 heatsink kit, suitable for Raspberry Pi 3B+, 3 B, 2, A, B, B+ boards | Includes 3pcs black anodized aluminum + 1pc copper heatsink | Pre-applied 3M 8810 thermal conductive adhesive tape backing | Can be applied with other devices for cooling VRAM VGA RAM, small IC Chips, MOSFET SCR, Southbridge , Northbridge etc | Raspberry pi not included

【Ultra HD 4K Input】This HDMI to Component Converter converts HDMI signal into YPbPr video and analog stereo R/L audio signal. Supports ultra HD 4K/60Hz input, backwards compatible with various HDMI resolutions, including 1080i/p(50/60Hz). | 【Scaling Function】With built-in scaler engine, this HDMI to YPbPr converter can scale the frame rate and resolution of HDMI signals into Component signals of various resolutions. Perfect solution for solving display problems when the source resolution is greater than the display resolution. | 【Zoom Function】Supports 5 kinds of picture zoom modes for picture gradual enlargemen. Note: the Zoom function only changes the image size, not the frame rate or resolution. | 【Wide Compatibility】It's widely used with DVD, STB, PS3, PS4, PS5, R-o-k-u players, Amazon Fire TV Stick, PC and other devices with HDMI output to display on older TVs with Component input. | 【Plug and Play】No drivers needed. Easy to install and operate.

HDMI to Component Converter Adapter converts HDMI signal into Component(YPbPr/ RGB/ 5RCA) video and analog stereo R/ L audio signal. Allows you to connect HDMI sources to a Component display, such as HDTV, monitor, projector, ect. | HDMI to RGB Converter with built-in scaler engine, can easily up-scales or down-scales HDMI signal to Component. Perfect solution for solving display problems when the source resolution is greater than the display resolution. | HDMI to YPbPr Converter Adapter supports OSD (On-Screen Display) for displaying current input and output resolutions. | HDMI to 5RCA Converter Adapter supports multiple HDMI resolutions input: 480p(60Hz), 576p(50hz), 720p(50/60Hz), 1080i/p(50/60Hz); Supports multiple Component resolutions output: 480p(60Hz), 576p(50hz), 720p(50/60Hz), 1080i/p(50/60Hz). Choose the best output resolution by the resolution switch button. | Plug and play. Easy to install and operate.

RCA + S-video to HDMI converter, converts RCA Composite CVBS AV or S-video signal to HDMI signal. 480i(NTSC) or 576i(PAL) standard definition signal input, upscale to 720P/ 1080P full HD high definition output. | Input: RCA Composite S-video Video, R/ L Audio; Output: HDMI and 3.5mm Jack audio. | Composite video and S-video can be connected simultaneously, and to be selected as the input by the switch button. | Widely used for cameras, VCR, DVD player, or old games consoles(such as NES, SNES, N64, Dreamcast, Saturn, Megadrive, Master System, Game Cube, Wii, WiiU, XBox, XBox 360, framemei Playstation 1, 2, 3, Atari, Neo Geo10) to output to an HDMI TV, projector or monitor for displaying. | Easy installation & operation, no software needed. Plug and play. Inculed RCA S-video Converter, AC power adapter, Composite cable, S-video cable.

ULTIMATE LENS PROTECTION: Lens Oaks provide the ultimate protection for your valuable camera lenses, safeguarding them against bumps, scratches, and more. | PRECISE FIT: Each Lens Oaks protector is custom-designed to perfectly match your specific lens model, maintaining its slim profile and granting easy access to all controls. | GREAT SHIELD: Crafted from a combination of Neoprene and Nylon materials, Lens Oaks offer a dual-layer protection system: soft on the inside to cradle your lens and water-resistant on the outside to shield it from the elements. | PREMIUM MATERIAL: Made with high-quality Neoprene and Nylon, Lens Oaks provide a secure grip, a soft touch, and superior durability, enhancing your lens's longevity and performance. | IDEAL GIFT: With its effective design, premium materials, and superior lens protection, Lens Oaks make for an excellent gift choice for photography enthusiasts and outdoor adventurers.

ULTIMATE LENS PROTECTION: Lens Oaks provide the ultimate protection for your valuable camera lenses, safeguarding them against bumps, scratches, and more. | PRECISE FIT: Each Lens Oaks protector is custom-designed to perfectly match your specific lens model, maintaining its slim profile and granting easy access to all controls. | GREAT SHIELD: Crafted from a combination of Neoprene and Nylon materials, Lens Oaks offer a dual-layer protection system: soft on the inside to cradle your lens and water-resistant on the outside to shield it from the elements. | PREMIUM MATERIAL: Made with high-quality Neoprene and Nylon, Lens Oaks provide a secure grip, a soft touch, and superior durability, enhancing your lens's longevity and performance. | IDEAL GIFT: With its effective design, premium materials, and superior lens protection, Lens Oaks make for an excellent gift choice for photography enthusiasts and outdoor adventurers.

ULTIMATE LENS PROTECTION: Lens Oaks provide the ultimate protection for your valuable camera lenses, safeguarding them against bumps, scratches, and more. | PRECISE FIT: Each Lens Oaks protector is custom-designed to perfectly match your specific lens model, maintaining its slim profile and granting easy access to all controls. | GREAT SHIELD: Crafted from a combination of Neoprene and Nylon materials, Lens Oaks offer a dual-layer protection system: soft on the inside to cradle your lens and water-resistant on the outside to shield it from the elements. | PREMIUM MATERIAL: Made with high-quality Neoprene and Nylon, Lens Oaks provide a secure grip, a soft touch, and superior durability, enhancing your lens's longevity and performance. | IDEAL GIFT: With its effective design, premium materials, and superior lens protection, Lens Oaks make for an excellent gift choice for photography enthusiasts and outdoor adventurers.

ULTIMATE LENS PROTECTION: Lens Oaks provide the ultimate protection for your valuable camera lenses, safeguarding them against bumps, scratches, and more. | PRECISE FIT: Each Lens Oaks protector is custom-designed to perfectly match your specific lens model, maintaining its slim profile and granting easy access to all controls. | GREAT SHIELD: Crafted from a combination of Neoprene and Nylon materials, Lens Oaks offer a dual-layer protection system: soft on the inside to cradle your lens and water-resistant on the outside to shield it from the elements. | PREMIUM MATERIAL: Made with high-quality Neoprene and Nylon, Lens Oaks provide a secure grip, a soft touch, and superior durability, enhancing your lens's longevity and performance. | IDEAL GIFT: With its effective design, premium materials, and superior lens protection, Lens Oaks make for an excellent gift choice for photography enthusiasts and outdoor adventurers.

ULTIMATE LENS PROTECTION: Lens Oaks provide the ultimate protection for your valuable camera lenses, safeguarding them against bumps, scratches, and more. | PRECISE FIT: Each Lens Oaks protector is custom-designed to perfectly match your specific lens model, maintaining its slim profile and granting easy access to all controls. | GREAT SHIELD: Crafted from a combination of Neoprene and Nylon materials, Lens Oaks offer a dual-layer protection system: soft on the inside to cradle your lens and water-resistant on the outside to shield it from the elements. | PREMIUM MATERIAL: Made with high-quality Neoprene and Nylon, Lens Oaks provide a secure grip, a soft touch, and superior durability, enhancing your lens's longevity and performance. | IDEAL GIFT: With its effective design, premium materials, and superior lens protection, Lens Oaks make for an excellent gift choice for photography enthusiasts and outdoor adventurers.

Protection against bumps and scratches | Custom manufactured per model | Provides a secure grip | High quality silicon material

THE ULTIMATE LENS BAG: Lens Oaks provide the ultimate protection for your valuable camera accessories while protecting it from bumps, scratches and more. | PRECISE FIT Each Lens Oaks camera case is designed to perfectly fit your specific lens model, maintaining its slim profile and allowing easy access to all controls. | GREAT PROTECTION: Made from a combination of neoprene and nylon materials, Lens Oaks offers a dual layer protection system: it's soft on the inside to wrap around your lens, and waterproof on the outside to protect it from the elements. | High-quality material: Made of high-quality neoprene and nylon, the lens oaks offer a secure grip, a soft feel and superior durability, thus increasing the durability and performance of your lens. | IDEAL GIFT: With their effective design, high-quality materials and excellent lens protection, the Lens Oaks are an excellent gift for photo lovers and outdoor adventurers.