MATERIAL - Made of Heavy Duty 600D oxford fiber coated with PU for added waterproofing that is stronger than most bag on US market. Besides the waterproof performance of PU is better than PVC on market. | SPECIFICATION – Total 2pcs Saddlebag. Dimension: 23in/58cm * 11in/27cm. Max Hold Capacity: 10 lbs. | DESIGN – 6 Colors available. 2 zipper pouches each side , Dual zipper system for extra security and for easy use. Double stitched seams reinforce the stability and sturdiness, making it more durable and long-lasting. | EASY TO USE – Fill the saddlebag with sand, gravel, snow, rocks, nuts, bolt or any available material near by. Do not need to carry the extra sand when you are out. (2 Pack Sand Bags ONLY!) | SUITABLE - for MOST photography video equipment, such as photo video studio stand, light stand tripod and jib arm mini camera crane.

MATERIAL - Made of Heavy Duty 600D oxford fiber coated with PU for added waterproofing that is stronger than most bag on US market. Besides the waterproof performance of PU is better than PVC on market. | SPECIFICATION – Total 2pcs Saddlebag. Dimension: 23in/58cm * 11in/27cm. Max Hold Capacity: 20 lbs. | DESIGN – 6 Colors available. 2 zipper pouches each side , Dual zipper system for extra security and for easy use. Double stitched seams reinforce the stability and sturdiness, making it more durable and long-lasting. | EASY TO USE – Fill the saddlebag with sand, gravel, snow, rocks, nuts, bolt or any available material near by. Do not need to carry the extra sand when you are out. (2 Pack Sand Bags ONLY!) | SUITABLE - for MOST photography video equipment, such as photo video studio stand, light stand tripod and jib arm mini camera crane.

MATERIAL - Made of Heavy Duty 600D oxford fiber coated with PU for added waterproofing that is stronger than most bag on US market. Besides the waterproof performance of PU is better than PVC on market. | SPECIFICATION - Total 2pcs Saddlebag. Dimension: 23in/58cm * 11in/27cm. Max Hold Capacity: 10 lbs. | DESIGN - 6 Colors available. 2 zipper pouches each side , Dual zipper system for extra security and for easy use. Double stitched seams reinforce the stability and sturdiness, making it more durable and long-lasting. | EASY TO USE - Fill the saddlebag with sand, gravel, snow, rocks, nuts, bolt or any available material near by. Do not need to carry the extra sand when you are out. (2 Pack Sand Bags ONLY!) | SUITABLE - for MOST photography video equipment, such as photo video studio stand, light stand tripod and jib arm mini camera crane.

MATERIAL - Made of Heavy Duty 600D oxford fiber coated with PU for added waterproofing that is stronger than most bag on US market. Besides the waterproof performance of PU is better than PVC on market. | SPECIFICATION – Total 2pcs Saddlebag. Dimension: 23in/58cm * 11in/27cm. Max Hold Capacity: 10 lbs. | DESIGN – 6 Colors available. 2 zipper pouches each side , Dual zipper system for extra security and for easy use. Double stitched seams reinforce the stability and sturdiness, making it more durable and long-lasting. | EASY TO USE – Fill the saddlebag with sand, gravel, snow, rocks, nuts, bolt or any available material near by. Do not need to carry the extra sand when you are out. (2 Pack Sand Bags ONLY!) | SUITABLE - for MOST photography video equipment, such as photo video studio stand, light stand tripod and jib arm mini camera crane.

MATERIAL - Made of Heavy Duty 600D oxford fiber coated with PU for added waterproofing that is stronger than most bag on US market. Besides the waterproof performance of PU is better than PVC on market. | SPECIFICATION – Total 2pcs Saddlebag. Dimension: 23in/58cm * 11in/27cm. Max Hold Capacity: 10 lbs. | DESIGN – 6 Colors available. 2 zipper pouches each side , Dual zipper system for extra security and for easy use. Double stitched seams reinforce the stability and sturdiness, making it more durable and long-lasting. | EASY TO USE – Fill the saddlebag with sand, gravel, snow, rocks, nuts, bolt or any available material near by. Do not need to carry the extra sand when you are out. (2 Pack Sand Bags ONLY!) | SUITABLE - for MOST photography video equipment, such as photo video studio stand, light stand tripod and jib arm mini camera crane.

【Durable Polyester Material】 Premium 900D polyester material for tripod stone bags is sturdy enough to hold stones, sand or photography accessories and the material is also waterproof, tear resistant and wearable. | 【Multipurpose】 Putting some heavy objects like gravel or sand into the tripod sand bags will provide additional stability as photographing in windy days. The sandbags also can be used to store camera accessories, such as lenses and battery charger. 3 compartments help classify different items as well. | 【Easy to Install】 You can set up the weight bag in a rapid and easy way, all you need to do is fix 3 hook and loop strips to tripod legs, then the bag can be used to place your water bottles or belongings. | 【Easy to Store】 When not using it, you can fold the light weight tripod stone bag up conveniently and stuff the bag into your camera backpack, which add little weight to equipment you carry around. | 【Perfect Fit】 The portable sand bags are compatible with most kinds of tripods, such as light weight tripods, travel tripods and studio tripods. The practicability of sand bags makes it an indispensable partner for any photographer.

【Durable Polyester Material】 Premium 900D polyester material for tripod stone bags is sturdy enough to hold stones, sand or photography accessories and the material is also waterproof, tear resistant and wearable. | 【Multipurpose】 Putting some heavy objects like gravel or sand into the tripod sand bags will provide additional stability as photographing in windy days. The sandbags also can be used to store camera accessories, such as lenses and battery charger. 3 compartments help classify different items as well. | 【Easy to Install】 You can set up the weight bag in a rapid and easy way, all you need to do is fix 3 hook and loop strips to tripod legs, then the bag can be used to place your water bottles or belongings. | 【Easy to Store】 When not using it, you can fold the light weight tripod stone bag up conveniently and stuff the bag into your camera backpack, which add little weight to equipment you carry around. | 【Perfect Fit】 The portable sand bags are compatible with most kinds of tripods, such as light weight tripods, travel tripods and studio tripods. The practicability of sand bags makes it an indispensable partner for any photographer.

【Durable Polyester Material】 Premium 900D polyester material for tripod stone bags is sturdy enough to hold stones, sand or photography accessories and the material is also waterproof, tear resistant and wearable. | 【Multipurpose】 Putting some heavy objects like gravel or sand into the tripod sand bags will provide additional stability as photographing in windy days. The sandbags also can be used to store camera accessories, such as lenses and battery charger. 3 compartments help classify different items as well. | 【Easy to Install】 You can set up the weight bag in a rapid and easy way, all you need to do is fix 3 hook and loop strips to tripod legs, then the bag can be used to place your water bottles or belongings. | 【Easy to Store】 When not using it, you can fold the light weight tripod stone bag up conveniently and stuff the bag into your camera backpack, which add little weight to equipment you carry around. | 【Perfect Fit】 The portable sand bags are compatible with most kinds of tripods, such as light weight tripods, travel tripods and studio tripods. The practicability of sand bags makes it an indispensable partner for any photographer.

【Durable Polyester Material】 Premium 900D polyester material for tripod stone bags is sturdy enough to hold stones, sand or photography accessories and the material is also waterproof, tear resistant and wearable. | 【Multipurpose】 Putting some heavy objects like gravel or sand into the tripod sand bags will provide additional stability as photographing in windy days. The sandbags also can be used to store camera accessories, such as lenses and battery charger. 3 compartments help classify different items as well. | 【Easy to Install】 You can set up the weight bag in a rapid and easy way, all you need to do is fix 3 hook and loop strips to tripod legs, then the bag can be used to place your water bottles or belongings. | 【Easy to Store】 When not using it, you can fold the light weight tripod stone bag up conveniently and stuff the bag into your camera backpack, which add little weight to equipment you carry around. | 【Perfect Fit】 The portable sand bags are compatible with most kinds of tripods, such as light weight tripods, travel tripods and studio tripods. The practicability of sand bags makes it an indispensable partner for any photographer.

★【10.1 inch HD Monitor】: 1024*600 resolution, 16:9 ratio, 300:1 contrast, 250cd/m2 high brightness delivers excellent detail. Making it perfect to be used as a CCTV system/PC monitor or Indoor Security, Game playing, Raspberry Pi Computer Use or uses as a mini size TV, photo scanner or video display. | ★【Multiple Interface Connections】: Our small monitor support VGA/AV/HDMI/DVD/PC/CCTV/TV, compatible with the security system, also could connect games consoles, video cameras, microscopes, digital SLR cameras, security camera and so on. | ★【Personalized Design】: Side Ultra thin seamless, only 0.9cm. Built-in 1.5W high fidelity speaker, with high sensitivity touch buttons and full function and real-time remote control. 160° wide viewing angle degree offers a clear view to the security monitor screen from each angle. The adjustable mount stand takes up less desktop space, easy to install. | ★【ABS Housing Mini Monitor】: The 10.1'' portable monitor with ABS material housing design, anti-vibration, anti-interference, wear-resistant, have better protection in all kinds of cracking environment. | ★【Pakage】: 1 x LCD Monitor, 1 x Power Adapter, 1 x HDMI Cable, 1 x AV Cable, 1 x VGA Cable, 1 x Mount Bracket, 1 x Remote Control, 1 x User Manual.

Brand new replacement remote control, ready-to-use without setting | Works perfectly as original one with clear printed marks and durable soft buttons | 2 AA batteries needed (NOT Included), super energy-saving design for long time usage | 30 days money back guarantee and 180 days warranty with prompt customer service | Works with Epson EX31, EX51, EX5200, EX3200, EX71, EX7200, PowerLite 1220/ 1260/ S7/ S9/ W7/ X9, VS200 and more projectors

Brand new replacement remote control, ready-to-use without setting | Works perfectly as original one with clear printed marks and durable soft buttons | 2 AA batteries needed (NOT Included), super energy-saving design for long time usage | 30 days money back guarantee and 180 days warranty with prompt customer service | Works with Epson PowerLite 955W/ 955WH/ 965/ 965H/ 97/ 97H/ 98/ 98H/ 99W/ 99WH/ S17/ S27/ W17/ W29/ X17/ X27/ X29, PowerLite Home Cinema 730HD and more projectors

Full Function Projector Remote Control for Optoma. No Programming or Pairing Needed. Automatically Sync to Your Projector. | Replace Your Broken or Lost Remote Control. Especially Used for Your Projector Which Mounted to the Ceiling. More Flexible and Convenient. | 2 x AAA Alkaline Batteries Required (NOT Included), Energy-saving Design for Long Time Usage. Easy to Use and Operate Out-of-box. | 30 Days Money Back Guarantee and 365 Days Extended Warranty with Prompt Customer Service. Worry-free Replacement During this Period. | Applicable Projector Models for DS211 DS216 DS216L DS316 DS316L DS322 DS323 DS325 DS326 DW312 DW318 DX319 DX619 DX621 DX623 DX626 ES521 ES526 ES526B ES526L ES529 EW531 EW536 EX521 EX525ST EX531 EX531P EX536 EX536L EX538 EX605ST EX605ST-EDU EX612 EX665UT EX665UTi EX665UTis PRO150S PRO160S PRO250X PRO260X PRO350W PRO360W TS526 TW536 TX536 TX612 S300 X300

Brand new replacement remote control, ready-to-use without setting | Works perfectly as original one with clear printed marks and durable soft buttons | 2 AA batteries needed (NOT Included), super energy-saving design for long time usage | Universal Compatible Model: 164880600 / 2181788 / 154720000 / 159917600 / 156606400 / 161371700 / 162636600 / 145664100 | Will work with EB-U04, EB-U32, EB-W04, EB-W32, EB-X31, EX3240, EX5240, EX5250 PRO, EX7240 PRO, EX9200 PRO, H719A, PowerLite 1224, PowerLite 1264, PowerLite 1284, PowerLite Home Cinema 1040, PowerLite Home Cinema 640, PowerLite Home Cinema 740HD, PowerLite S31+, PowerLite U32+, PowerLite W04+, PowerLite W32+, PowerLite X36+, VS240, VS340, VS345

DURABLE & JUST THE RIGHT SIZE: Measuring 15 x 16 inches and made of very fine quality cloth fabric with cross-stitched shoulder handles, these small canvas tote bags can hold up to 10kg and will last you a long time! | ECO-FRIENDLY & ETHICAL: Manufactured in ethically certified manufacturing facilities powered with solar energy, these reusable tote bags are 100% biodegradable and environment-frien

★Note: This item comes unassembled, soldering of headers is required. Lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR. | ★Upgrade ESP32 lora development board with 868/915MHz antenna, it supports Sniffer, Station, softAP and Wi-Fi Direct modes. If you want to use the Lora feature, you need two esp32 lora modules. One is used to send messages and one is used to receive messages. | ★High reliability, transmission distance (measured open area communication distance 2.8Km); Receiver sensitivity up to - 139 dBm, UDP continues to throughput by 135 Mbps. | ★Board friendly, space of pins is 2.54*23mm, fit to breadboard. 0.96-inch blue esp32 oled display, lithium battery charging circuit and interface, CP2102 USB to serial chip.

32-bit RISC-V MCU & 2.4 GHz Wi-Fi 6 & Bluetooth 5 (LE) & IEEE 802.15.4 | PC connectivity: USB | SDK: ESP-IDF source code and example applications | Please refer to the description for exact Flash size and PSRAM size (if any). The photo is same for all module variants currently. | User Guide：https://espressif-docs.readthedocs-hosted.com/projects/espressif-esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html | Notes: The ADC on current samples is not calibrated, so the ADC calibration functionality is not available yet. The ADC will be calibrated on chips for mass production orders. | Please contact [email protected] if you have further business or technical questions.

ESP8266 un chip altamente integrato progettato per le esigenze di un nuovo mondo connesso. | Offre una soluzione di rete Wi-Fi completa e autonoma, che consente di ospitare l’applicazione o di scaricare tutte le funzioni di rete Wi-Fi da un altro processore dell’applicazione. | ESP8266 dispone di potenti di elaborazione e archiviazione integrate che ne consentono l’integrazione con i sensori e altri dispositivi specifici dell’applicazione tramite i relativi GPIO con uno sviluppo minimo iniziale e un carico minimo durante il runtime. | L’elevato grado di integrazione on-chip consente una circuiteria esterna minima e l’intera soluzione, incluso il modulo front-end, progettata per occupare un’area PCB minima. | ESP-01S ESP8266 da Porta Seriale a WIFI Remoto Modulo wireless basso consumo per Arduino

The JTAG in-circuit debugging feature is available for the ESP32 platform. | It is easy to use and can be connected to a computer with only one USB cable. | The user board is required to place the Program (6-Pin) and JTAG (10-Pin) connectors in the corresponding order. | It has automatic download firmware, serial communication, JTAG online debugging and other functions. | These functions are available for the ESP8266 and ESP32 platforms.

2.4GHz Dual Mode WiFi + Bluetooth Development Board | Support LWIP protocol, Freertos;ESP32 is a safe, reliable, and scalable to a variety of applications | SupportThree Modes: AP, STA, and AP+STA | Ultra-Low power consumption, Compatible with Arduino IDE | 1PCS 30Pin ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

2.4GHz Dual Mode WiFi + Bluetooth Development Board | Support LWIP protocol, Freertos | SupportThree Modes: AP, STA, and AP+STA | Ultra-Low power consumption, Compatible with Arduino IDE | ESP32 is a safe, reliable, and scalable to a variety of applications

COMPATIBILITY – Designed specifically for the iPad Air 4th Generation 10.9 Inch / iPad Pro 11” (2020/2018). Not compatible with any other models. | FACE ID & PENCIL COMPATIBLE – A large camera & microphone cutout ensures unaffected Face ID and sound quality. Ultra-thin design maintains high responsiveness when using the Pencil . | EASY INSTALLATION – Free installation frame makes perfect alignment with zero bubbles a breeze. | HD PROTECTION – This ultra-transparent screen protector fully preserves image quality while protecting your iPad from dust & scratches. | WHAT’S INCLUDED – Comes with 2 tempered-glass screen protectors, an installation frame, 2 cleaning kits, and instructions.

Compatibility: only compatible with iPad Pro 12.9 inch (2022/2021/2020) and iPad Pro 11 inch (2022/2021/2020) | Tempered Tough: ultra-hard scratch-resistant glass keeps your camera safe from scuffs and scratches | HD Clarity: only 0.5 mm thick and ultra-clear to make sure that your pictures stay pixel perfect while your camera stays protected | Perfect Fit: precisely designed to ensure every inch of your lens is protected and full compatibility with ESR cases | Bubble Free: simply clean your camera with the included cleaning kit and apply for a perfect bubble-free application

Compatibility: compatible with AirPods Pro 2nd Generation (2022) and AirPods Pro 1st Generation (2019); earbuds and charging case not included | MagSafe Ready: strong magnets built into the back of the case ensure a secure lock on MagSafe chargers, letting you enjoy tap-and-go wireless charging for your earbuds | Hybrid Drop Protection: double the defense via an ultra-hard shell and flexible, shock-absorbing core, to keep your charging case well protected and looking brand new | Easy-Carry Strap: braided cord can wrap around your wrist or easily attach to your bag or belt buckle, for a more convenient and secure way to take your earbuds with you | Speaker Cutouts: specially positioned apertures on the base let you hear the FIND MY app sound loud and clear, so you’ll always know where your earbuds are | Complete Customer Support: detailed setup videos and FAQs, comprehensive 12-month warranty, lifetime support, and personalized help

Compatibility: only compatible with AirPods Pro 2nd Generation (USB-C/Lightning Cable) and AirPods Pro 1st Generation (2019); earbuds and charging case not included | MagSafe Ready: strong magnets in the back of the case ensure a secure lock on MagSafe chargers, letting you enjoy tap-and-go wireless charging for your earbuds | Powerful Drop Protection: shock-absorbing polymer and Air-Guard corners keep your charging case safe from even the worst drops and impacts | Magnetic Locking Lid: precision fit combined with 4 strong magnets creates a secure, firm hold, so you never have to worry about the lid coming loose or your AirPods Pro popping open at the wrong time | Visible Status Light: precise cutout lets you check the charging status at a glance, whether you’re charging wirelessly or with a cable

Compatibility: only compatible with iPad Air 5th Generation (2022) and iPad Air 4th Generation (2020); not compatible with any other iPad models | User Friendly: precise cutouts allow full access to speakers, ports, and camera; easy-to-press button covers keep out dust | Slim and Light: lightweight back-only design protects your iPad without adding bulk | Soft and Strong: flexible rubber-like material offers maximum durability and won't leave scratches on your iPad | Crystal Clear: clear polymer keeps the logo visible and shows off your tablet’s original look | Complete Customer Support: detailed setup videos and FAQs, comprehensive 12-month warranty, lifetime support, and personalized help

Compatibility: only compatible with iPad mini 6 (8.3 inch, 2021); models A2567 and A2568 | 3 Stand Modes: enjoy a more versatile, comfortable hands-free view and choose portrait mode for FaceTiming and browsing or 2 different landscape modes for a better way to catch up on your favorite shows | Slim and Lightweight: super-slim design ensures a snug fit and excellent grip without adding bulk to your iPad mini 6 | Tough and Clear: hard back prevents bending and stays crystal clear for longer so you can better show off your iPad mini’s true style | Protection Where it Matters: raised screen edges and Camera Guard, flexible polymer frame, and shock-absorbing Air-Guard corners provide screen and full-body protection

Compatibility: only compatible with iPad Pro 11 inch (2022, 4th Generation), iPad Pro 11 inch (2021, 3rd Generation), and iPad Pro 11 inch (2020, 2nd Generation); models A2759, A2435, A2761, A2377, A2459, A2301, A2228, A2068, A2230 | Secure Magnetic Attachment: powerful magnets ensure a strong lock between case and tablet | Lightweight Protection: protect every inch of your tablet from drops and bumps while maintaining its sleek profile and convenient portability | Two-Way Stand: magnetic trifold cover easily folds into a stable stand for viewing or writing to ensure a comfortable angle for catching up on your favorite shows or taking notes with your Pencil | Secure Magnetic Clasp: supports Pencil 2 magnetic pairing and wireless charging with a magnetic clasp that folds over to keep it securely in place when on the go

[Compatibility]: Specifically Designed for the Apple iPad 9.7" 2017/18 (Fits models: A1822, A1823,A1893, and A1954). NOT compatible with any other iPad models. | [Slim & Lightweight]: Slim lightweight hardback adds minimal bulk while protecting your device. | [Back Cover Design]: Constructed from translucent hard plastic that helps to resists dirt and stains. | [Easy Access]: FlexPress button cover is easy to press and will protect your iPad from dust. Precise cutouts for speakers, the camera, and ports. | [180 Days Warranty]: Replacement or refund for any quality issues that arise during the warranty period.

COMPATIBILITY - Designed for the for iPad Air 4th Generation 2020 10.9 Inch(Model no. A2316,A2324, A2325, A2072)/iPad Pro 11 2018 (Model no. A1980,A2013, A1934,A1979). Not compatible with any other iPad models. | MAGNETICALLY ATTACHED - Powerful built-in magnets ensure a strong lock between the case & iPad. | 2 STAND POSITIONS – Trifold front cover enables both viewing and typing modes. | PENCIL 2 COMPATIBLE – Supports the Pencil’s magnetic charging and pairing, with a fold-over clasp for extra protection. | LIGHTNING-FAST SLEEP/WAKE – Works seamlessly with your iPad’s auto sleep/wake function.

Work from Anywhere: upgrade your iPad to getting-stuff-done mode by transforming it into a portable productivity machine and be ready to work whenever, wherever | Quick-Set Magnetic Stand: ultra-strong magnets seamlessly combine case and tablet to let you easily open the floating cantilever stand to the perfect angle for typing or browsing | Multiple View Modes: back case detaches for instant hands-on access with full-body protection and can be set up in raised screen view, for better posture during use, and portrait mode, for the perfect way to FaceTime | Quick and Easy Navigation: use every millimeter of the extended, ultra-sensitive multi-touch trackpad to tap, pinch, and swipe with perfect precision and navigate your iPad in a whole new way | Compatibility: only compatible with iPad Air 5th Generation (2022), iPad Air 4th Generation (2020), and iPad Pro 11ʺ (2022/2021/2020/2018); models: A2316, A2324, A2325, A2072, A2377, A2459, A2301, A2460, A2068, A2228, A2230, A2231, A1980, A2013, A1934, A1979

Compatibility: Compatible with the 1st and 2nd generation Pencil as well as other similarly sized styluses, not compatible with the LAMY AL-star EMR, Surface Pen, or other large styluses | Adhesive Backing: Strong adhesive keeps the pencil holder securely in place | Elastic Sleeve: The elastic pouch holds your pen more securely and makes grabbing or storing your pen quick and easy | Customizable Use: Choose the location of the holder on your device or case that’s best for you | Simple Design: Combines PU leather and soft Lycra for a simple, stylish, and classic look

Compatibility: Compatible with the 1st and 2nd generation Pencil as well as other similarly sized styluses, not compatible with the LAMY AL-star EMR, Surface Pen, or other large styluses | Adhesive Backing: Strong adhesive keeps the pencil holder securely in place | Elastic Sleeve: The elastic pouch holds your pen more securely and makes grabbing or storing your pen quick and easy | Customizable Use: Choose the location of the holder on your device or case that’s best for you | Simple Design: Combines PU leather and soft Lycra for a simple, stylish, and classic look

Keep Your Mouse on Hand: attach to your iPad, MacBook, or case so you’ll never forget your Magic Mouse again | Reusable Residue-Free Adhesive: powerful and secure adhesive lets you remove and re-attach until you find the perfect spot, without leaving annoying sticky residue behind | Compact and Secure: elastic lycra sleeve keeps your mouse secure, won’t add any bulk to your device, and makes retrieving or storing your mouse quick and easy | Compatibility: designed to perfectly fit the Apple Magic Mouse 1 and 2; also compatible with other, similarly-sized wireless mice | Notes: this product is designed for hard and smooth surfaces, and may not adhere properly to soft, matte, mesh, or glass surfaces; frequently removing and re-attaching the holder will weaken the adhesive

INSTALLATION INSTRUCTIONS – When putting on the case cover, you may need to use a little force to push the top and bottom covers together. | FITS LIKE A GLOVE – Like a second skin for your AirPods Pro charging case. This ultra-thin silicone cover’s hingeless, two-part design allows your case to open completely, providing quick and easy access to your AirPods and the pairing button. NOTE: AirPods and charging case are NOT included. | VISIBLE FRONT LED – This 0.8 mm thick cover won’t affect wireless charging and is thin enough for your case’s status light to shine through. | ENHANCED PROTECTION – Made with premium silicone and shock-absorbent corners, the Breeze Plus Series Silicone Cover helps protect your AirPods case from everyday wear-and-tear without adding bulk. | SATISFACTION GUARANTEE – Every ESR product comes with a 100% satisfaction guarantee. If you are, for whatever reason, unhappy with the product, we will gladly provide a replacement or refund.

Compatibility: only compatible with AirPods 3rd Generation (2021); AirPods not included | Enhanced Drop Protection: shock-absorbing silicone with a hard inner core provides protection against drops, bumps, and scratches for your AirPods 3rd Generation case | Easy Access: snug fit with a hingeless, two-part design that opens fully for quick and easy access to your earbuds | Made to Move: built-in keychain hook with included carabiner makes keeping track of your AirPods 3 case a breeze | Wireless Charging Ready: supports wireless charging and keeps your status light visible

[Solid Protection]: Made with premium silicone; this cover helps protect your AirPods Pro case from bumps and drops without adding additional bulk. | [Secure, Upgraded Fit]: This silicone cover fits perfectly with the AirPods Pro charging case (2019 Release), ensuring the lid closes securely and completely. The upgraded hinge design allows the case to open completely, providing quick and easy access to your AirPods and the pairing button. | [Visible Front LED]: Won’t affect wireless charging. A small section of the cover has been specially designed to allow your case’s status light to shine through. | [Easy to Carry]: The keychain design and free carabiner make carrying your charging case easier than ever. You’ll never have to worry about losing your AirPods again. | [Included in the package]: A premium silicone case and a durable keychain. (AirPods & charging case not included)

Designed exclusively for Apple iPad Air 2 ( Model N0: A1566, A1567).--Not compatible with iPad Air. Please view the 2nd image to check which iPad you have. | Made of polyurethane material with soft microfiber lining. The semi-transparent hardback cover specially treated with matte finish will show the perfect shape and logo of your iPad, and prevent fingerprints and scratches as well. | Magnetic Cover that instantly wakes up iPad when opened, and makes it go to sleep once closed (so no wasting precious battery life). No more worry about scratches on the iPad screen or wake up of your iPad. | The multiple magnets make every fold exceptionally sturdy and the dual folding capabilities enable you to have a stand for typing or an upright position for easy viewing. | Only 10.6mm and 200g, ultra slim and light weight, add no bulk to you iPad.

The essential artifacts of audiophiles make the sound more complete and accurate, reduce the occurrence of harmonic vibration, and make the sound quality better and more comfortable. | It's end point to the ground, can minimize the harmful vibration | Can eliminate the pollution between the ground and the speaker, get the sound effect | It can be put under the speaker, or under the shock board and anti-shock frame | Appearance is absolutly and high profile.