Laptop screws kit | Sizes: M2 M2.5 M3 | Color: Silver | Perfect for PC case, power supply, motherboard, hard drives, fan and floppy/CD-ROM/DVD-ROM drives fixed installation, they are placed in a box, easy to find and use!

4pcs 25mm copper heatsink kit. | Pre applied thermal conductive adhesive tape backing. | Unit weight: 14 gram. | Dimension: 0.98" x 0.98" x 0.16" / 25mm x 25mm x 4mm (LxWxH). | Can be applied for cooling Raspberry Pi, IC Chips, LED Modules etc

Includes 2 pieces black anodized aluminum heatsink. | Pre-applied 3M 8810 thermal conductive adhesive tape backing. | Can be applied for passive cooling of Water cooling modules, 3D printers stepper motor, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc. | Dimension: 3.15 x 1.57 x 0.43 inch / 80mm x 40mm x 11mm (L*W*H). | Unit Weight: 1.2 oz / 35 gram per piece.

Includes 2 pieces black anodized aluminum heatsink. | Pre-applied thermal conductive adhesive tape backing. | Can be applied for passive cooling of Water cooling modules, 3D printers stepper motor, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc. | Dimension: 3.9 x 1.57 x 0.78 inch / 100 x 40 x 20 mm (L*W*H). | Unit Weight: 2.7 oz / 75 gram per piece.

30 sets complete insulator/mounting kit for Heatsink power semiconductor packages. | 30 pcs TO-220 insulation kits: Screw + Washer + Bushing and Insulator rubberized silicone. | Can be used for Voltage Regulator Transistor MOSFET LM317 L7805 L7806 L7808 L7809 L7810 L7812 L7815 L7818 L7824 IRFZ44N IRF510N IRF520N IRF530N IRF540N IRF640N IRF740 IRF840 IRF3205 IRF9540 IRF Series etc | TO-220 Heatsink is not included.

Includes 30 pieces black anodized aluminum heatsink | 10 gram Thermal conductive adhesive gllue with strong adhesion included. | Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc. | Dimension:0.55 x 0.55 x 0.28 inch / 14mm x 14mm x 7mm (L*W*H) | Weight: 0.056 OZ / 1.6 gr per piece

40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc | Fan specifications: Ball bearing, speed 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC | Fan dimension: 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm. | Heatsink dimension: 40x40x11mm, Adhesive thermal pad dimension: 40x40x0.5mm. | Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc thermal pad, 1 metal grill, screw mouthing screw nut set.

Includes anodized aluminum heatsink | Pre-applied thermal conductive adhesive tape backing | Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc. | Dimension: 1.57 x 1.57 x 0.44 inch / 40 x 40 x 11mm (L*W*H) | Weight: 0.6 oz / 17 gr per pc

Includes 40pcs copper pad shim, low profile 20mm x 20mm / 0.8 x 0.8 inches, in 6 thicknesses. | Includes 7pcs of these thicknesses: 0.3mm, 0.5mm, 0.8mm, 1mm. | Includes 6pcs of these thicknesses: 1.2mm, 1.5mm | [Main Body Material: Copper]. Thermal conductivity: 401W/mK; can be applied for gap filler in thermal heat sink and cooling of the Development Boards Laptop GPU VGA VRAM RAM IC Chips PS5 M.2 NVMe SSD, etc

4 pack of 120mm black finger grills. | Includes fan mounting screws. | Made to fit standard 120mm square fans.

Includes 4 pieces black anodized 40mm aluminum heatsink. | Dimension: 1.57"x1.57"x0.79" / 40x40x20mm | Unit weight: 1.6 oz / 45 gram per piece | Can be applied for passive cooling 3D printer stepper motor, TEC1-12706 Thermoelectric module, NEMA17, LED etc | 3D printer stepper motor, TEC1-12706 Peltier Thermoelectric Cooler Module Not Included.

4 pack of 50mm black finger grills. | Includes fan mounting screws. | Made to fit standard 50mm square fans. | Color: Black.

4 pack of 92mm black finger grills. | Includes fan mounting screws. | Made to fit standard 92mm square fans.

Thermal conductivity > 6.5 W/m-k. | Thermal resistance 0.0016 k-in/W. | Working Temperature: -30/280°c. | Each pack includes 1 gram high performance thermal paste/grease. | Can be applied for cooling the interface of heatsink and CPU GPU IC Chips, etc.

6 Pieces Aluminum Heat Sink | Size: 4" x 1" x 0.4"/100mm*25mm*10mm (L*W*H) | Unit weight : 33g | Can be used for cooling LED, Power IC and Transistors, etc

72pcs Graphic Card Heatsink Screw Mount, GPU Spring Screws, Graphics Card Back Plate Heatsink Screws | Package includes 12pcs: M2x6.8, M2.5x7.5, M2.5x9, M2.5x9.5, M2.5x10, M2.5x11.

Laptop Memory NVMe SSD m.2 2280 copper heatsink kit. | [Main Body Material: Copper]. Thermal conductivity: 401W/mK; Dimension: 77mmx22mmx1mm/ 3.03' x 0.86' x 0.04' (L*W*T); Weight: 0.32 oz 14 gram. | [Greatly increase the heat dissipation area], Special design for cooling your Laptop RAM to a safe temp to avoid overheating and throttling, improve your computer's performance. | [Unique High Performance Thermal Tape]: Nano thermal tape for efficient heat conductivity. | Each pack includes: 1 piece Laptop M2 2280 copper heatsink + High performance Nano thermal pad in two thicknesses 70x22x1mm and 70x22x0.5mm.

Suitable for Raspberry Pi 4 B, 3 B+ boards | Includes 4 pcs copper heatsink | 3M 8810 thermal conductive adhesive tape backing | Can be applied with other devices for cooling VRAM VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc | Raspberry pi not included.

Suitable for Raspberry Pi 4 B, 3 B+, 3, 2, A, B, B+ boards | Includes 1pc 25mm quite fan and 3pcs aluminum + 1pc copper pad shim heatsink | Heatsinks are pre-applied thermal conductive adhesive tape backing | Fans are with One-to-Two wire connector Interface for dual speed mode (3.3V and 5V DC) Low noise (15.92dBA), Long life (30,000 hours) | Raspberry pi not included

Raspberry pi 4 heatsink kit, suitable for Raspberry Pi 3B+, 3 B, 2, A, B, B+ boards | Includes 3pcs black anodized aluminum + 1pc copper heatsink | Pre-applied 3M 8810 thermal conductive adhesive tape backing | Can be applied with other devices for cooling VRAM VGA RAM, small IC Chips, MOSFET SCR, Southbridge , Northbridge etc | Raspberry pi not included

HDMI to Component Converter Adapter converts HDMI signal into Component(YPbPr/ RGB/ 5RCA) video and analog stereo R/ L audio signal. Allows you to connect HDMI sources to a Component display, such as HDTV, monitor, projector, ect. | HDMI to RGB Converter with built-in scaler engine, can easily up-scales or down-scales HDMI signal to Component. Perfect solution for solving display problems when the source resolution is greater than the display resolution. | HDMI to YPbPr Converter Adapter supports OSD (On-Screen Display) for displaying current input and output resolutions. | HDMI to 5RCA Converter Adapter supports multiple HDMI resolutions input: 480p(60Hz), 576p(50hz), 720p(50/60Hz), 1080i/p(50/60Hz); Supports multiple Component resolutions output: 480p(60Hz), 576p(50hz), 720p(50/60Hz), 1080i/p(50/60Hz). Choose the best output resolution by the resolution switch button. | Plug and play. Easy to install and operate.

Protection against bumps and scratches | Custom manufactured per model | Provides a secure grip | High quality silicon material

Water-proof closed-cell neoprene cover dedicated to the Tamron 150-600mm f/5-6.3 Di VC USD Model AO11 lens. | Protects the lens from bumps and scratches to preserve its value and condition. | Thermal insulated design benefits working in cold conditions. | Helps break up the shape of the lens, making it less noticeable to wildlife. | Easy to install and remove, leaving no residue on the lens.

Protection against bumps and scratches | For Tamron 150-600mm f/5-6.3 Di VC USD G2

Water-proof closed-cell neoprene cover dedicated to the Tamron 150-600mm f/5-6.3 Di VC USD Model AO11 lens. | Protects the lens from bumps and scratches to preserve its value and condition. | Thermal insulated design benefits working in cold conditions. | Helps break up the shape of the lens, making it less noticeable to wildlife. | Easy to install and remove, leaving no residue on the lens.

For Sigma 150-600mm Contemporary Forest Camo

For Sigma 150-600mm Contemporary

For Sigma 150-600mm Contemporary

Protects the lens from bumps and scratches to preserve its value and condition | Easy to install and remove, leaving no residue on the lens | Secure Grip | Camouflage | 5 Colours

Protects the lens from bumps and scratches to preserve its value and condition | Easy to install and remove, leaving no residue on the lens | Secure Grip | Camouflage | 5 Colours

Protects the lens from bumps and scratches to preserve its value and condition | Easy to install and remove, leaving no residue on the lens | Secure Grip | Camouflage | 5 Colours

Protects the lens from bumps and scratches to preserve its value and condition | Easy to install and remove, leaving no residue on the lens | Secure Grip | Camouflage | 5 Colours

Protects the lens from bumps and scratches to preserve its value and condition | Easy to install and remove, leaving no residue on the lens | Secure Grip | Camouflage | 5 Colours

Water-proof closed-cell neoprene cover dedicated to the Sony FE 200-600 F5.6-6.3 G OSS | Protects the lens from bumps and scratches to preserve its value and condition. | Thermal insulated design benefits working in cold conditions. | Helps break up the shape of the lens, making it less noticeable to wildlife. | Easy to install and remove, leaving no residue on the lens.

Water-proof closed-cell neoprene cover dedicated to the Sony FE 200-600 F5.6-6.3 G OSS | Protects the lens from bumps and scratches to preserve its value and condition. | Thermal insulated design benefits working in cold conditions. | Helps break up the shape of the lens, making it less noticeable to wildlife. | Easy to install and remove, leaving no residue on the lens.

Water-proof closed-cell neoprene cover dedicated to the Sony FE 200-600 F5.6-6.3 G OSS | Protects the lens from bumps and scratches to preserve its value and condition. | Thermal insulated design benefits working in cold conditions. | Helps break up the shape of the lens, making it less noticeable to wildlife. | Easy to install and remove, leaving no residue on the lens.

Water-proof closed-cell neoprene cover dedicated to the Sony FE 200-600 F5.6-6.3 G OSS | Protects the lens from bumps and scratches to preserve its value and condition. | Thermal insulated design benefits working in cold conditions. | Helps break up the shape of the lens, making it less noticeable to wildlife. | Easy to install and remove, leaving no residue on the lens.

Closed-cell neoprene cover | Protects the lens from bumps and scratches to preserve its value and condition | Easy to install and remove, leaving no residue on the lens | Secure grip

ChipSet UTV 007 | Support For All Formats: record in DVD+/-R/RW, DVD+/-VR, and DVD-Video | Enclosed the professional video editing software then provide best editing function | Compatible with WIN 7 8 10 11 32bit and 64bit | Share finished projects on DVD, tape, the Web, and mobile devices.

OD 2.2mm toslink male to toslink male audio fiber cable | Using good quality fiber core ensures high speed, high efficiency, high fidelity, and low loss of broadband transmission. | Provides you the cleanest possible signal, even at extreme volume levels. | Support Dolby Digital (Dolby 5.1, 6.1 and 7.1) AC-3/DTS surround sound receiver, connects to your DVD, CD, Mini Disc, DAT other digital audio equipment for clear, full and richly detailed sound. | Range of application: cameras, monitoring system, HD video and audio system, MD player network TV, digital TV, satellite television, broadband network, communication net system, 3D and 4D HD digital cinema, digital imaging system, car, aircraft, ships and other digital audio equipment.