Professional Flash PC Sync Splitter Cord . The materia of the port is copper with gold plating,it has a very good contact and never oxidated. It has a screw lock,so the cable can be locked with the pc socket of the camera. | Cable length: 120mm(4.7inch ) | Suitable for : compatible with screw lock PC sync port, eg: CANON 580EXII 7D 5DII 50D 40D 30D 20D 10D 1D... NIKON D300S D300 D200 D100 D700 D3X D3S D2X D2H D1 SC-15 SB-900,800,80DX,29s, 29,28DX,28,27,26,25,24,22s,22,20,17,16,14,11,140... YONGNUO RF-603 PIXEL TF-321 TF-322 TF-323 TF-324 TF-325 | compatible without screw lock PC sync port, eg: DSLRKIT PT-04 PT-04NE... YONGNUO PT-04TM... Seagull SC-2 SC-5 SC-6... | Please make sure that take off the plug vertically in unlocked status, the misoperation may cause damage

Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter | This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the "Data In" port, then plug the cable to your device into the "PoE" port with your existing network cable | This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the "PoE" port, this will damage your device | This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don't plug the "PoE" side into anything that isn't ready for it | Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More.....

The POE splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation

This compact ruler allows you to determine if your lens is auto-focusing accurately as it should. It is an essential tool that is particularly useful when shooting with a shallow depth of field, where focusing should ideally be "spot on". | You can use this ruler to determine how "off" the focusing is for a particular camera / lens combination and, on supported cameras, adjust the camera's auto-focus settings to resolve this | On Nikon cameras, this feature is known as "AF Fine Tune". On Canon and Sony cameras, it's known as "AF Micro Adjustment". Please refer to your camera's instructions manual to see if this feature is present. | Size:19*12.3cm | Package Included: Lens Focus Calibration Card X 2

Please make sure that take off the plug vertically in unlocked status, the misoperation may cause damage | The materia of the port is copper with gold plating,it has a very good contact and never oxidated. | It has a screw lock,so the cable can be locked with the pc socket of the camera.

Suitable for Sony FE 70-300mm f/4.5-5.6 G OSS(SEL70300G) | Advanced CNC processing,High quality Anodized aluminum alloy

It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. | Suitable For: CANON NIKON PENTAX FUJI OLYMPUS | Material: Aluminum | Color: Black

It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. | Suitable For: CANON NIKON PENTAX FUJI OLYMPUS | Material: Aluminum | Color: Graphite Silver

It can protect the hot shoe from scrathing, keep it clean, and avoid moisture. It's very easy to carry and be operated. | Suitable For: CANON NIKON PENTAX FUJI OLYMPUS | Material: Aluminum | Color: Silver

Easy to use, tough to be handled | This item has been designed to offer a secure girp while maintaning all the normal features and functions of the camera | This item can improve the grip on the camera both portrait of landscape positions, and conveniently places the thumb directly over the control wheel | This item is small and light, so it does not snag on strapes or clothing, ergonomic shape gives more grip for less effort. | Special for Fuji X-E1 / X-M1 / X-A1 / X-E2 / X-Pro1

Accomodate with all filter ring sizes from 27mm to 130mm | It can remedy lens' filter threads and dented lenses

Suitable for Tamron SP 70-200MM F/2.8 DI VC USD (A009) | Ring inner diameter: 72.8mm | Ring width: 18mm | Ring thickness: 4.5 mm | Color: Black

The perfect color as the original lens. | Advanced CNC processing,High quality aluminum baking painted surface. | Suitable for Canon EF 70-200mm f/2.8L USM, Canon EF 70-200mm f/2.8L IS USM, Canon EF 70-200mm f/2.8L IS II USM, Canon EF 100-400mm f/4.5-5.6L IS USM. | Product specifications: Ring inner diameter: 78mm. Ring width: 18mm. Ring thickness: 4.2-7mm. Color: White. The UNC (Unified National Coarse Thread) is 1/4" and 3/8".

Suitable for Sony FE 70-350mm f/4.5-5.6 G OSS(SEL70350G) | Advanced CNC processing,High quality Anodized aluminum alloy

The tripod mount ring mount on the tripod, it helps you fix and balance your tele lens which is heavy or long lens hanging off the front of camera | Made by metal with very high quality | Suitable for Tamron SP AF 70-200mm F/2.8 Di LD [IF] MACRO Model A001

Battery Capacity: 3.6V(Mean)/1400mAh | Info Function for Life Indication | Dual port design lets you charge 2x batteries at the same time for 1.2A total output | QUICK CHARGE 1.0: 2A input to ensure efficiency and avoid over-heating, high-current, voltage-surge | 100% Compatible with original batteries and chargers

The Battery grip is compatible with Canon EOS R5 R6 camera | Easy to carry and fast charge and keep charged, don not worry about insufficient power when shooting | Rechargeable lithium ion battery for Canon LP-E6N | A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort | Two years warranty

For BMPCC 6K or BMPCC 4K Camera | Powered by L-series type batteries | Powers Camera for up to 2 Hours | The grip mounts on the bottom of the BMPCC 6K or 4K camera and features a sleek | Two years warranty

Two rechargeable batteries help you double the charging efficiency and shorten the waiting time | The smart LED charger display the battery charging level real time to prevent your from frequent guessing how much your battery have been charged. it can charge either two batteries simultaneously or 1 battery from any USB Power source | The battery cell features four layers of protection (over-charging, short-circuit, high-temperature, and surge protection) with a high-quality, Fire-resistant construction | With one Micro-USB port and one Type-C port, the batteries can be charged with wall charger, car charger, power bank or other charging option. Instantly switch to charging mode within 1s by inserting the batteries, hands-free | 2 year warranty and lifetime service

A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort | It takes one or two LP-E17 rechargeable batteries effectively doubling your shooting capacity | The rugged, but lightweight, body design has gasket-sealed controls to resist dust | When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation | Notice: It can not show battery level when using DSTE LP-E17, but can show battery level when using the original LP-E17

DSTE EN-EL15 Battery works with Nikon D500, D600, D610, D750, D800, D800e, D810, D810a, D850, D7000, D7100, D7200, D7500, 1 v1, Z6, Z7 cameras, Nikon MH-25 MH-25a charger and more. | Battery Capacity: 2550mAh/17.9Wh; Voltage: 7.0volts Charger Input: 5V 2.1A(MIN); Output: 8.4V 500mA*2/700mA*1 | Can charge 2 batteries simultaneously, save your time | LCD screen design, it can show the charging process of each battery | Dual Charger with Micro USB port and Type-C port, convenient for you to choose the charging cable(item comes with USB Type-C to USB-A 2.0 Male Cable)

Battery Type : Li-ion | Battery Capacity : 5.4Wh/1450mAh | Output Voltage : DC 4.2V (max)/ DC 3.6V (mean) | Info Function for Life Indication | High Capacity for Stamina

Built in Infrared remote control function | A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort. | Holds two Li-ion batteries for extended shooting | The rugged, but lightweight, body design has gasket-sealed controls to resist dust | When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation.

A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort. | Holds two Li-ion batteries or six AA Battery for extended shooting | Li-ion Battery Info: DC 7.4V (max); DC 7.2V (mean) 18.7Wh/2600mAh | When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation. | Built in Infrared remote control function and remaining power indicator

A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort. | Holds one Li-ion batteries or eight AA Battery for extended shooting | Li-ion Battery Info: DC 8.4V (max); DC 7.2V (mean) 16.3Wh/2200mAh | When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation. | Remaining power indicator

A firm, comfortable grip for vertical-position shooting with the Camera. Buttons and controls are conveniently placed and easy to reach for greater comfort. | Holds one Li-ion batteries or six AA Battery for extended shooting | Li-ion Battery Info: DC 8.4V (max); DC 7.2V (mean) 17.9Wh/2550mAh | When using two batteries, the grip will automatically switch to the second battery if the first becomes depleted. Switching does not interrupt camera operation. | Remaining power indicator

Use this tool to insert or extract D-Sub pins with ease | The tool is easy to use | This tool comes coded | The red side for insertion and the white side for extraction | Computer Products | Cable Assembly

Change the Connector Gender on Devices or Cables. | Connect Two Serial Cables Together to Get A Longer Cable. | Serial Port Saver. Plugging in and out can wear out connectors. Add this adapter on to avoid connector wear out. | A Wide Range of Uses in Laptop, Printer,Cashier Register, Serial Device etc. | Package Content : 6 PCS x 25 Pin Male to 25 Pin Male Serial Mini Gender Changer. | RoHS.

7.1 Channel External USB Audio Sound Card Adapter | USB 2.0 Full-Speed (12Mbps) Specification | Connectors: USB Type A, Stereo output jack, mono microphone input jack | USB bus-powered, no external power required | LED indicators: Microphone-Mute Status, Activity

beautiful and unique design, there will be completely different color rendering from different angles at the same environment | Glass cube prisms photography prism Made of high quality optical glass | Physics Teach Decoration Art Prism Glass Cube Can be used as teaching tools or research and decorations, it are very beautiful | Optical Glass Dispersion Prism, No defect, no burr, made of K9 optical glass. All surfaces can be refracted | nice demonstration of beam splitting and light filters, awesome color combinations that can be created

Fully Decoded Dummy Battery for Sony L-Series:Replace NP-F550/NP-F570/NP-F750/NP-F970 to power your led light and Feelword/Atomos Ninja V Monitor,DCRVX2100/HDRFX1 which use same battery model from a V-mount battery with D-tap | An Affordable Power Solution:it is needed for long-term use of equipment during shooting, but direct power from a V-mount battery is not possible. In this case, a full decoding Dummy battery can serve as a bridge between them | Quality Guarantee:Each cable is thoroughly 100% tested to ensure the safety of your devices before shipping.If you receive a defective or non-working cable,we'll promptly send you a replacement or solve the problem to your satisfaction. | Do Not Use Under Heavy Load:output is 7.4V/3A and Power is 24W(Max),Please use under standard specifications, which can better protect your device. | Flexible Coiled Cable Length:12.6 to 39" power cable can meet the adjustment of distance between most devices

You can expand any Power Tap to accommodate up to four separate with our D-Tap male to 4-port female connector. This 4 Port Splitter Power Cable is Perfect for powering multiple wireless receivers, Camera monitors, and other D-Tap output photographic power. | Our cables are equipped with strain relief devices at the cable ends to reduce stress and prevent them from breaking, so our cables are durable. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Max Work Current: 10 amp max total. Cable Length: 40 inch/100cm, please contact us if you need other lengths. | Easy to use: Power D-Tap outputs, Coiled power cable for a flexible reach and neat setup.

You can expand any Power Tap to accommodate up to four separate with our D-Tap male to 4-port female connector. This 4 Port Splitter Power Cable is Perfect for powering multiple wireless receivers, Camera monitors, and other D-Tap output photographic power. | You can expand any Power Tap to accommodate up to four separate with our D-Tap male to 4-port female connector. This 4 Port Splitter Power Cable is Perfect for powering multiple wireless receivers, Camera monitors, and other D-Tap output photographic power. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Max Work Current: 10 amp max total. Cable Length: 40 inch/100cm, please contact us if you need other lengths. | Easy to use: Power D-Tap outputs, Coiled power cable for a flexible reach and neat setup.

D-Tap to DC-Lock connection | Also suitable for all recorders except the first shogun | Barrel Coiled Cable for Battery Eliminator

Perfect length, both practical and not too short. Expand 1 Dtap female into 4, it is a perfect solution for someone who wants to add multiple Dtaps to their camera rig. | Compatible for: BMPCC 4K 6K , Tilta Nucleus Nano, SmallHD Monitor, Z-cam, 7" monitor and Ninja V. | Power source can be Gold Mount batteries, V Mount batteries, Gold Mount Plates with D-tap output. The D-tap end of the cable is equipped with a strain relief device. | Plug A: D-tap Male Connector; Plug B: 4 Port D-tap Female Connector. | Total length: 6.7 inch/ 17cm. Max work current: 10 amp. If you need to customize other lengths, please contact us before placing an order.

1.5ft COM port serial cable f/f connects your computer to device with RS-232 compatible interface | DB9 rs232 cable female to female connector on each end equipped with screws to ensure an easy and solid connection for stable data communication | The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code | DE9 serial Straight Through cord is pin-to-pin wired as a 9 pin serial cable Straight Thru (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G); standard shielded with AL foil | 1.5 feet short female serial adapter for some old RS232C equipment like scanner, Modem, printer, plotter, switches, camera, barcode / embroidery machine, touchscreen, microcontroller, test equipment

1.5ft 9 pin serial port cable connects your computer to device with RS-232 compatible (COM port) interface (NOT VGA-cable that connect computer-to-monitor) | Black male to male serial cable DB9 connector on each end equipped with screws to ensure an easy and solid connection for stable data communication | The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code | It is pin to pin wired as a RS232 serial Straight Through com cord (pinout :1-1, 2-2, 3-3, 4-4,......, 8-8, 9-9, G-G); standard shielded with AL foil | 1.5 feet short RS232 serial cord for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment

(NOT USB to VGA adapter) USB to serial adapter FT232 cable allows your computer to make communication with serial devices equipped with 9 pin female RS232 interface | USB to male serial port adapter cord is designed for connecting Serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanners, label writers, serial modem, digital camera, card reader, palm PCs and digital organizer, etc | (FT232 chip) Long FTDI serial cable to USB adapter for Windows 11,10, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later (9 wire pinout 1-9: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS, RI) | COM port serial to usb converter is designed with a high performance quality processor chip (FT232RL), which makes this USB RS232 adapter one of the most reliable adapters on the market | 10ft DB9 RS232 to USB adapter with 9 pin male to USB-A male gold plated connector uses crystal clear blue enrich injection, strong and beautiful; active pins: 2(RXD), 3(TDX), and 5(GND)

(NOT USB-to-VGA monitor cable) RS232C USB to serial FEMALE cable to connects a PC laptop or desktop without DB9 port to a RS232 serial device for data communication via COM port | 10ft long female serial to USB adapter is with USB-Powered design requires no bulky power supply with superior performance, offering an easy connectivity for serial plug devices | Prolific USB to RS232 adapter is with PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms | RS232 cable’s interface is 9 pin Female DB port, works with a serial device equipped with a 9-pin Male Port; the USB to serial adapter is with Prolific PL2303 chipset (NOT FTDI chip) | Serial cable to USB adapter is designed for connecting 9 pin Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc