Connect DJI Ronin RSC2 / RS2 / RS3 / RS3 pro / RS3 Mini stabilizer and compatible with SONY camera | Compatible with Sony camera A1,A6000,A6100,A6300,A6400,A6500,A6600,A7M2,A7M3,A7M4,A7R2,A7R3,A7R4,A7R5,A7S,A7S2,A7S3,A9,ZV-1,A9 II,FX3,FDR-AX100E,PXW-Z90V,Rx100 VII | Functions(Depends on both Stabilizer and Cameras in your hand, see Compatibility Result in the picture): Capture photo,Start/stop recording video,Trigger auto focus,Zoom control(digital or optical),RavenEye,Ronin Image Transmitter. | 33cm Lenght

Max Load Capacity: 2 KG | Material: anodized aluminum alloy | Ball head with 1/4"-20 screw connector | For supporting monitor or other devices | Features flexible 360° rotation & 90° tilt

1/4"-20 female double thread screw | Fits 1/4"-20 male thread connector | Screw column diameter: 18mm | Screw column height: 18mm | Material: aluminum alloy

Monitor support bracket exclusively for SmallHD 700 series | Mounts accessory via bottom 1/4"-20 thread hole | Strong enough to hold up to 1.5KG | Material: aluminum alloy

Double-ended 1/4" male screw | Fits 1/4" threaded hole | Material: aluminum alloy

Mounts via the 1/4"-20 male threaded screw | Applied to support a wall-mounted accessory | The round base can be screwed on to the wall, ceiling, podium and table, etc.

A shoe mount adapter screwed on the end | 360° rotatable & 90° tiltable mini ball head | Mini ball head with 1/4"-20 screw connector | Material: aluminum alloy and CNC machined

360° rotatable & 90° tiltable mini ball head | Mini ball head with 1/4"-20 screw connector | Material: aluminum alloy and CNC machined | Oval base screwed on the bottom with 2 fitting holes

You can use this product to put the Laser Level BOSCH on the tripod. | size: 5/8"-11 male to 1/4"-20 female . | Materail:stainless steel 304. | Weight:28 g.

Material: anodized aluminum alloy | Comes with rosette M6 female mounts | For handheld DLSR camera shoulder rig | Extendable long from 198mm to 255mm | 15mm & 19mm railblocks combined into one

Diameter: 15mm | Length: 145mm | Material: Aluminum Alloy | With M12 Thread on Each End | With 1/4"-20 threaded holes and 3/8"-16 threaded holes

Diameter: 15mm | Length: 197mm | Material: Aluminum Alloy | With M12 Thread on Each End | With 1/4"-20 threaded holes and 3/8"-16 threaded holes

It's designed to work with a shoulder pad | Rod spacing from centre to center is 60mm | Material: aluminum alloy and CNC machined | 15mm dual-rod clamp, dual-knob to fasten up | 1/4"-16 threaded holes available for accessories

Material: Aluminum Alloy | Thread hole: 1/4"-20 at both ends | The rod could be mounted to the 15mm clamp via 1/4"-20 thread | Length: 20mm, it's used to raise the height for the correct lens height

The 15mm Micro Rod provides 3/8" male to 1/4" female thread. 2cm length. | It comes with 4pcs M5 thread holes. | Net Weight: 18.8g

Soft rubber grip. | 15mm Rod Compatible | Precision CNC machined from 6061 aluminum | Standard Rosette Adapters(M6,31.8mm diameter)

Soft rubber grip. | 15mm Rod Compatible | Precision CNC machined from 6061 aluminum | Standard Rosette Adapters(M6,31.8mm diameter)

This is a 15mm rod clamp with 1/4" female thread. | Compatible with: 15mm DSLR Camera Rig, 15mm Cage | Material: black anodized aluminum,Solid and Sturdy. | Weight: 0.037kg

For DSLR Rig | Material: Aluminum Alloy | Compatible with 15mm Rod | Have thress 1/4" Threaded hole

Campatible with 15mm Rod | With 4 Holes on the Clamp | With 3 Red Ajustable Knobs | Material: Aluminium Alloy

With 4 Holes on the Clamp | With 3 Black Ajustable Knobs | Campatible with 15mm Rod | Material: Aluminium Alloy

15mm Rod Clamp | 1/4"-20 Threaded Holes | Material: Aluminum Alloy

15mm Rod Clamp | 1/4"-20 Threaded Holes | Material: Aluminum Alloy

Aluminum Alloy Construction | 1/4"-20 Female to M12 Male 15mm Rod Caps | Compatible with M12 Female-Threaded Rods | 15mm Rod Connector with M12 Thread on Both Ends

Standard M6 Rosette handgrip | For DSLR handheld shoulder rig | Material: aluminum alloy & wood | 15mm dual-rod clamp in the center

Material: aluminum alloy | Standard 15mm side single rod holder | Compatible with any 15mm rod/ pole/pipe | Integrated with cold shoe mount adapter | Perfect for attaching rod-based accessories

Have a 1/4"-20 screw on the top. | Mount on 15mm rod/pipe. | CNC machining machined. | Material:aluminum.

For DSLR Rig | Material: Aluminum Alloy | Compatible with 15mm Rod | Have thress 1/4" Threaded hole

Material: aluminum alloy | Max Load Capacity: 2 KG | Internal diameter of the light stand mount: 16mm | Light stand mount comes with 1/4" male connector

Material: aluminum alloy | Maximum load capacity: around 1.5 KG | Mounts via 1/4" threads on double ends | Light stand head with internal diameter up to 16mm | Used to support a monitor,flash light, video light, etc

3/8"-16 Cold Shoe Mount Adapter with ARRI Locating Pins - Allen Wrench - CAMVATE 1 Year Limited Warranty | For ARRI-standard locating holes | Mounts via 3/8"-16 thread screw | Comes with ARRI locating pins | Anti-fall set screw included

Material: aluminum alloy | Anti-fall set screw included | Dimension: 24.5mm × 25mm | Mounts via 3/8"-16 thread screw | Compatible with ARRI-standard locating holes

1/4" male to 3/8" female Adapter | material is brass with nickel plated | rubber gasket included

Aluminum Alloy Construction | Spring Loaded Rechet Wingnut to Lock | 1/4"-20 Thread Screw to mount devices | 360° rotatable & 90° tiltable ball head

1/4"-20 Threading on Both Ends | Articulated Arm with 360° Rotation | V1 Large Version 7",Articulating Arm | Perfect for LED on camera, Monitor, Cage, Mic

For supporting a microphone stand | Material: nickle brass & aluminum alloy | Dimension: 5/8''-27 male to 1/4''-20 female | Bottom pedestal with fitting holes included

Material: Aluminum | Color: Black | Net Weight: 18.3g

Max Load Capacity: 2 KG | Material: anodized aluminum alloy | Ball head with 1/4"-20 screw connector | For supporting monitor or other devices | Includes right angle type pedestal mount

1/4"-20 and 3/8"-16 Mounting Holes. | For Small Cameras / Camcorders / DSLRs. | CNC Machined Aluminum Construction,Anodized Aluminum. | Have one 1/4"-20 thread hole on the bottom to mount on other equipment.

Weight:460g | Material: Aluminum and leather | NOTE:the diameter of the rosette is 31.8mm,M6 thread | Surface treatment:Aluminum Anodized for rust resistant | This Camera DIY Rig can be attached to ARRI style Rosette,ARRI equipment,DIY accessories