Mini SAS SFF 8643 to U.2 SFF 8639 Cable is particularly designed to connect an PCIe slot with SFF-8643 port and SSD with U.2 interface. | Provides high-performance data transfer by upgrading a computer with a U.2 NVMe SSD. | It is capable of performing 5x faster than a SATA SSD even when a U.2 connection is not available on the motherboard. | Integrated SATA power connects U.2 connection to the computer power supply to power the NVMe SSD with 3.3V 12V. | RoHS certified and support all NVMe SSD. It is an efficient and productive choice for networks, servers, workstations, External Storage Systems and more.

External SAS SFF-8088 Cable Assembly,0.5-meter(1.6ft); | AWG30 Twinaxial 8-pair high-bandwidth low-skew wire; | Impedance = 100 Ohms; | External cabling solution for connecting Mini-SAS devices; | Compliant with 3Gb/s SAS and 6Gb/s SAS protocols.

External SAS SFF-8088 Cable Assembly, 1.5-m(5ft) | AWG30 Twinaxial 8-pair high-bandwidth low-skew wire | Impedance = 100 Ohms | External cabling solution for connecting Mini-SAS devices | Compliant with 3Gb/s SAS and 6Gb/s SAS protocols

Internal SAS SFF-8087 to 4x SATA Cable, Straight to Right Angle, 0.5-meter(1.6ft). | AWG30 Twinaxial 8-pair high-bandwidth low-skew wire. | Impedance = 100 Ohms. | Up to 6Gbps data rates per channel. | This Mini SAS to SATA cable provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

Internal SAS SFF-8087 to 4x SATA Cable, 0.8-meter(2.64ft) | AWG30 Twinaxial 8-pair high-bandwidth low-skew wire | Up to 6Gbps data rates per channel; Impedance = 100 Ohms | This Mini SAS to SATA cable provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. | This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

Mini SAS (SFF-8643) to 4x SATA Cable: SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports; 4x7Pin SATA is the target , connect to the hard drives with SATA port. | The new SFF-8643 connector uses less PCB real estate and allows higher port density for internal hosts and devices. Provides point data transfer speeds up to 6 Gbit/s. | Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. | Before you buy this cable, please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.

Mini SAS (SFF-8643) to 4x SATA Cable: SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports; 4x7Pin SATA is the target , connect to the hard drives with SATA port. | The new SFF-8643 connector uses less PCB real estate and allows higher port density for internal hosts and devices. Provides point data transfer speeds up to 6 Gbit/s. | Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. | Before you buy this cable, please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.

A 4-lane high-density connector used for SAS and SATA data transfer. Four individual 7-pin SATA connectors for connecting hard disk drives (HDDs) or solid-state drives (SSDs). Used in storage arrays where high-speed data transfer between SAS controllers and SATA storage devices is required. | Mini SAS (SFF-8643) to 4x SATA Cable: SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports; 4x7Pin SATA is the target , connect to the hard drives with SATA port. | The new SFF-8643 connector uses less PCB real estate and allows higher port density for internal hosts and devices. Provides point data transfer speeds up to 6 Gbit/s. | Offers a cost-effective way to connect SAS controllers to storage devices while maintaining high performance. The short cable length and right-angle connectors make it easy to route and manage within server enclosures. | Before you buy this cable, please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.

Mini SAS (SFF-8643) to 4x SATA Cable: SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports; 4x7Pin SATA is the target, connect to the hard drives with SATA port. | The new SFF-8643 connector uses less PCB real estate and allows higher port density for internal hosts and devices. Provides point data transfer speeds up to 6 Gbit/s. | Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Using a thicker, higher-purity tinned copper core combined with aluminum foil shielding greatly improves data transmission efficiency and speed while reducing heat loss. | MiniSAS SFF-8643 to 4 SATA 7Pin data cable uses dual-channel aluminum foil cable. Enable faster, more efficient data transfer, and a slim, flexible, tensile-resistant cable that can be flexibly placed in any corner. | Before you buy this cable, please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.

SFF-8644 to QSFP Cable, QSFP compatible for Cisco. 10Gtek offer more compatible options, if your brands not listed above, pls contact us. | Impedance = 100 Ohms | Up to 10 Gbps transfer rate per channel. | Precision process control for minimization of pair-to-pair skew. | Fully compliant to the latest QSFP MSA (Multi-Source-Agreement) and the latest SAS3.0.

Internal SAS HD SFF-8643 to Internal SAS SFF-8087 Cable, 0.3-m(0.98ft); | Impedance=100 Ohms; | Up to 6Gbps data rates; | If the cable you need is not above, please contact us for your design.

The Internal Mini SAS HD SFF-8643 to Mini SAS SFF-8087 cable is designed for high-speed data transfer between SAS devices and is suitable for various applications, including servers, storage systems, and workstations | 100 Ohm impedance to ensure stable data transmission | Up to 6Gbps data rates | Maintain high signal integrity at high data rates, ensuring reliable data transfer | Being compact and low-profile, allowing for easy routing and installation in tight spaces

The Internal Mini SAS HD SFF-8643 to Mini SAS SFF-8087 cable is designed for high-speed data transfer between SAS devices and is suitable for various applications, including servers, storage systems, and workstations | 100 Ohm impedance to ensure stable data transmission | Up to 6Gbps data rates | Maintain high signal integrity at high data rates, ensuring reliable data transfer | Being compact and low-profile, allowing for easy routing and installation in tight spaces

The Internal Mini SAS HD SFF-8643 to Mini SAS SFF-8087 cable is designed for high-speed data transfer between SAS devices and is suitable for various applications, including servers, storage systems, and workstations | 100 Ohm impedance to ensure stable data transmission | Up to 6Gbps data rates | Maintain high signal integrity at high data rates, ensuring reliable data transfer | Being compact and low-profile, allowing for easy routing and installation in tight spaces

The Small Form Factor (SFF) 8643 is a type of connector used primarily for SAS and SATA devices. | Each connector on the cable is capable of supporting 4 lanes of SAS 3.0 traffic (or 4 lanes of SATA 6 Gbps), which makes it ideal for connecting to high-speed SAS or SATA drives. | The SFF-8643 connectors are backward compatible with older SAS and SATA standards, although performance will be limited by the capabilities of the connected devices and the host controller. | For instance, if you are connecting SAS 3.0 devices, the cable will support data transfer rates up to 12 Gbps per lane, or 48 Gbps total for all four lanes. | Both ends of the cable feature right-angle connectors. These connectors are designed at a 90-degree angle, which can be advantageous in systems with limited space, as they allow for more flexible cable routing and can reduce strain on the connectors.

Internal mini Serial Attached SCSI SFF-8643 to (4) SFF-8482 Serial Attached SCSI fan-out cable, with one quad-channel SFF-8643 on one end, and four single-channel SFF-8482 on the other. | Compliant with SAS 3.0, supports up to four SAS/SATA hard drives, provides point data transfer speeds up to 12 Gbit/s. | SFF-8643 Connector: Internal HD Mini SAS connector on the host for connecting motherboard or RAID Controller. (Note: Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.) | SFF-8482 Connector: 29-pin SAS drive connector on the target end for connecting directly to the SAS drives. All SFF-8482 cables are wired the same way, no need to worry about directionality. | Widely applicable for enterprise storage, high-performance computing, networking, data centers, workstations, etc.

10GBase-CU, 1.5 Meter | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Cisco SFP-H10GB-CU1.5M, Ubiquiti, Fortinet and more | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.

10GBase-CU, 5 Meter, 26AWG | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Cisco SFP-H10GB-CU5M, Ubiquiti, Fortinet and more(Note: For network cards, we recommend you to buy 5M AOC cable or optical module instead of 5M DAC cable.) | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.

10GBase-CU, 0.5 Meter | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Dell Force 10 CBL-10GSFP-DAC-0.5M | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.

10GBase-CU, 1 Meter | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with HP ProCurve J9281B, HP Aruba J9281D | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test.

10GBase-CU, 1 Meter | 2-pair differential twinax cable, Passive, EEPROM I2C | Compatible with Mellanox MC3309130-001 | 10Gtek's automatic assembly line, assures the consistency of manufacture under the process of laser cutting, aluminum shielding stripping, isolator stripping, automatic reshaping, automatic soldering and ultraviolet ray curing. Each DAC cables take the TDR & VNA measurement, guaranteeing passing the signal integrity test. | We are a professional manufacturer and accept customized orders. If necessary, please contact us for customized SKU to meet your needs. Products will be shipped from China.

DEEP CLEAN YOUR DEVICE The electronics cleaner kit can effectively deep clean all your electronic devices such as mobile phones, tablets, TVs, etc. It comes with retractable large brush, polishing cleaning cloth X 2, keycap puller, metal pen tip, flocking sponge,thin soft brush, soft plastic lens cleaning pen, 5 replacing cloth , large cleaning microfiber cloth, recyclable spray 2ml. It's compact so you can keep one in a drawer, one in the car or in your bag | 【Keyboard Cleaning&Screen Cleaning】A retractable moderate soft and hard brush works on laptops and keyboards, while the mini high-density brush is great for deep cleaning between keys for cleaning between flatter keys on a laptop, the metal pin tip to gently remove any stains between keys and the hinge of your laptop. Premium cleaning kit provides all the tools you need to effectively clean fingerprints and other embedded dirt from keyboard surface | 【2023 Update Design】 Wipe with the 2mm thicken and widen polishing cloth designed at a right angle for better fitting the four screen corners of computers, leaves zero discoloration, zero streaks, and no fiber shedding on the screens. High-quality microfiber cloths are extremely soft as well as durable, Stop risk scratching your expensive new phone or laptop screen with a cheap screen cleaner set | 【Effectively Cleaning All Your Devices】 Soft brush and Soft plastic lens cleaning pen is especially designed for camera screen, lens and other delicate surfaces. 5 more cleaning cloth of it supplied for replacing. The flocking sponge is an excellent tool for cleaning headphones charging cases, while the metal pin tip and high-density brush are ideal for cleaning the sound outlet holes on earbuds. Keep your smartphone, camera lens, laptop, headphones and other electronic accessories clean | 【Easy to Use and Carry】Turn off and unplug your computer before cleaning. Tip the laptop over to remove larger debris from the keyboard, follow the cleaning kit’s manual. Wipe the screen gently in one direction, avoiding circles and excessive pressure. Use our dry microfiber cloth to polish the surface. The screen cleaner kit will easily be your new favorite tool when it comes to taking care of the things you love most because it’s super easy to use

Soft Neoprene durable material, protecting your laptop from dust, scratches and water. | Shoulder strap is adjustable and removable. If not need, padded handles enable you to carry it in comfort. | A side zipper pocket for small items, such as portable mouse, cell phone, ipod and pens. | High quality printing on both size of bag make your life colorful. It can be held up well in washing machine or dryer, never fade. | Laptop shoulder bag dimension: 270 x16 x 220 MM (LxWxH), Suit for iPad 2 3 4 5 air, Microsoft Surface /Samsung Galaxy Tab/ Asus ZenPad /Dell Venue/ Google Pixel C

Fiber Type:1.25Gb/s Dual LC OM3 Fiber Module 10 Pack; Wavelength: 850 nm Multimode; Reach: up to 550 meters; with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant. | Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function. | Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing. | Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.★ Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches. | If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options). ★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver has been tested for 28 steps before shipping.

1. High Performance and Advanced DDM Monitoring: 10PACK SFP 1000Base-LX Module features an LC Single-Mode Fiber (SMF) connection, operating at a 1310nm wavelength with a 1.25Gb/s data rate and a reach of up to 20km. It includes an advanced Digital Diagnostic Monitoring (DDM) function, allowing real-time monitoring of critical parameters such as temperature, voltage, and optical power. This ensures optimal performance and helps identify potential issues in fiber links, making it compliant with SFP MSA and IEEE 802.3z standards. | 2. Energy Efficiency and Quality Assurance: Designed for low power consumption, the module operates at less than 1 watt, providing a cost-effective solution for optical networking needs. Each module undergoes rigorous testing before packaging, ensuring high quality and reliability. FTTPVIPS delivers innovative optical networking solutions, helping businesses reduce energy costs while maintaining high performance. | 3. Ease of Use, Durability, and Quick Recognition: The SFP 1000Base-LX Module is hot-swappable, enabling easy installation and replacement without disrupting network operations. The module features a user-friendly rotating ring latch for simple removal and insertion. With power dissipation of less than 1.05W and a heat-conducting gasket, it offers excellent heat dissipation, enhancing durability and longevity. Additionally, it can be quickly auto-identified by devices, ensuring seamless integration and operation. | 4. Wide Application and Compatibility: This transceiver module is widely used in various network devices, including fiber switches, routers, network interface cards (NICs), servers, and other fiber optic equipment with 1Gb SFP ports. It is compatible with major brands such as Cisco (GLC-LH-SMD, GLC-LH-SM, SFP-GE-L), Meraki (MA-SFP-1GB-LX10), Ubiquiti (UF-SM-1G), Mikrotik, Fortinet, TP-Link (TL-SM311LS), D-Link, Netgear, Supermicro, HPE, Aruba, and other common brands in US data centers. It supports Gigabit Ethernet, Fiber Channel, and other optical links. | 5. Exceptional Support and Warranty: The SFP 1000Base-LX Module comes with a 30-day money-back guarantee, a 3-year warranty, and lifetime technical support. FTTPVIPS ensures that each transceiver is tested through 28 steps before shipping to guarantee top quality. If you have compatibility concerns or need customized options, the company provides tailored solutions to meet your specific needs. This commitment to customer satisfaction and support makes it a reliable choice for your networking requirements.

1. High-Performance Connectivity: 10Pack 1.25G SFP module operates on 850nm wavelength multimode fiber (MMF), delivering robust 1000BASE-SX Gigabit Ethernet connectivity up to 550 meters. It excels in high-speed data transfer applications such as Network Attached Storage (NAS), Storage Area Networks (SAN), and High Performance Computing (HPC). Compatible with a diverse range of equipment including switches, routers, NICs, servers, and other devices equipped with 1Gbps SFP ports. | 2. Versatile Compatibility: Compatible with MSA compliant equipment such as Cisco, Meraki, Ubiquiti, D-Link, Supermicro, TP-Link, Broadcom, Linksys, Huawei, MikroTik, Netgear, HPE, Aruba and other open switches. This broad compatibility ensures seamless integration into various network environments and infrastructures. | 3. Advanced Monitoring and Easy Maintenance: It supports hot-swapping and plug-and-play functionality, enabling quick automatic recognition. Featuring advanced Digital Diagnostic Monitoring (DDM), this module allows real-time monitoring of critical parameters for signal transmission and reception. Additionally, it boasts low power consumption and includes enhanced ESD protection, simplifying deployment and maintenance processes. | 4. Wide Application Scope: Suitable for enterprise networks, data centers, and home network setups alike. It supports both 62.5um and 50um LC fiber cables and is compatible with OM1, OM2, OM3, and OM4 fiber types, meeting the connectivity requirements of diverse 1Gbps SFP port-equipped devices. | 5. Quality Assurance and Comprehensive Support: Each module undergoes rigorous pre-shipment testing and is backed by a comprehensive 3-year warranty and lifetime technical support. Compliant with MSA (Multi-Source Agreement) standards, it ensures high reliability and stability over prolonged operational periods.

Compatibility - for Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Ubiquiti UF-SM-10G, D-Link, Supermicro, Netgear and other open switches. | 10Pack 10GBase-LR SFP+ Modules - 10Gb/s, single-mode, 1310nm, Duplex LC fiber, up to 10KM transmission distance. | Easy to use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. | High Quality - All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch. | After-sales Service - 30 days Free-Returned, 3 years Free Warranty and lifetime technology support, please contact us, any product quality and compatibility issues.

10PCS 10GBase-SR SFP to LC Multi Mode Data Rate:10G; Wavelength: 850-nm Multi-Mode module; Port Type: LC/UPC; Reach: up to 300m using 50/125um Multi-Mode Fiber, Supports full-duplex Fiber Type: Dual LC OM3/OM4 multi-mode fiber. | Compatible with MSA compliant equipment from Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UF-MM-10G, Mikrotik, D-Link, Huawei, Netgear, Supermicro and More; CONNECTIVITY: 10G BASE-SX SFP transceiver for multimode fiber, 850 nm wavelength, supports up to 300m. | Widely Used: Work with multi-mode fiber connection Connects a network switch, server, or NIC with SFP to a Gigabit fiber channel network with multimode LC for Network Attached Storage (NAS), Storage Area Network (SAN), and High Performance Computing (HPC) applications. | Durable & Low Power Consumption: Less power usage and low EMI emission design, heat-conducting increases the life of the product, Hot-pluggable with advanced ESD protection. | EASY TO USE: Easy installation, plug and play, fully hot-swapple, Always keep the protective dust plug on the SFP’s optical bores until you are ready to make a connection.

Equivalent to dymo LetraTag 91331 S0721660 labeling tape refills. Color: Black on White. Size: 1/2"(12mm) Width x 13'(4m) Length. Material: Thermal plastic paper. | This polyester white plastic label tape is wipe-able, tear-resistant, long-lasting, and easy-to-use. Self-adhesive with easy to peel backing. | The label cassettes are Compatible with DYMO LetraTag label maker printers, including LetraTag, LetraTag Plus LT100H, LetraTag Plus LT100T, LetraTag QX50, XR, XM, 2000, LetraTag QR | These 1/2 inch label maker refills for indoor use to conveniently create easy to read labels at home, in the office, etc. Used for labeling files, folders, books, accessories. And are ideal for labeling office supplies, tools, kitchen items, garage equipment, and more. | [Material] The 91331 plastic label refill is made from polyester plastic paper.

Capacity of 6 TB and up to 15 TB compressed capacity on HP StoreEver and non-HPE LTO-6 devices | Supports transfer speeds of 300 MB/s (native), 750 MB/s (2.5:1) with Generation 7 | Barium Ferrite (BaFe) technology | Support for tape drive hardware encryption | Compatible with Linear Tape File System (LTFS) | Simplified tape path to reduce wear and tear

YOU GET 10 CORDS. Charcoal gray (Cisco) store brand handset cord. Compatible with Cisco IP phone models CP 7811 7811G 7821 7821G 7841 7841G 7861 7861G 7900 7902 7902G 7905 7905G 7906 7906G 7910 7910G 7911 7911G 7912 7912G 7914 7914G 7931 7931G 7936 7936G 7940 7940G 7941 7941G 7942 7942G 7945 7945G 7960 7960G 7961 7961G 7962 7962G 7965 7965G 7970 7970G 7971 7971G 7975 7975G Office 8800 8811 8841 8845 8851 8861 8865 SPA301 SPA303 SPA501G SPA502G SPA504G SPA508G SPA525G2 SPA514G SPA509G SPA525G. | 18 to 20 inches when relaxed. Industry standard calls it a 12 foot cord. 12 feet of material goes into it. Practical working length 7 feet max | High quality. Gold plated contacts. RJ9 connectors. RoHS Compliant. UL Approved and Listed. Made in China like almost all handset cords. | YOU GET 10 CORDS per quantity; If you want 20 cords put 2 in the quantity (drop down) window; if you want 30 put 3, etc. Each is new in a plastic sleeve.

【High Performance】 Single mode duplex 10 Gigabit SFP+ transceiver, supports up to 10km fiber length connection and 0~70℃ operating temperature. | 【Widely Compatible】 The SFP+ transceiver are widely compatible with Cisco products(Cisco 3000 &6000 series router are not supported) and Netgear, MikroTik, Ubiquity, DLink etc., ( Not recommended for HP, Juniper and Aruba products). The fiber module also works well with switch, router, media converter and more 10G SFP+ optic ports | 【High Quality】 The shell adopts high density and heat-resistant insulation zinc alloy, high performance chipset, which makes the product more stable and efficient transmission, and low power consumption. More than 1000k+ pcs SFP are already deploy in global market | 【100% Aging Testing】The gold finger of SFP+ module are carefully examined to reach the perfect combination of circuit assembly precision. All SFP are 100% aging testing after assembling to ensure that all sold modules are stable and high reliability | 【Fast & Convenient Connection】 The SFP+ module support hot swappable, which just need plug and play for fast connection with LC-LC Single-mode fiber path.

➥➤ Product name: Replaceable Pen Nibs Stylus Tip for Wacom | ➥➤ Product size: 27mm | ➥➤ Fits for WACOM BAMBOO: CTE, MTE, CTL, CTH; Intuos 3, Intuos 4L WACOM Bamboo Capture CTH-470; for WACOM Bamboo Capture CTH-470 CTH-480 CTH-480S Tablet's Pen;for One by Wacom CTL-471 , CTL-671 , CTL-472 , CTL-672; Intuos CTL-490 , CTL-690 , CTH-490 , CTH-690 | ➥➤ Simple to Install, perfect graphic Drawing Pad Standard Pen Nibs Stylus for Wacom Drawing Pen | ➥➤ Package Include: 10 Pcs Standard Nibs with Removal Ring as images displayed

❀Designed to transform voltage or change the impedance of a load. | ❀The primary and secondary windings are closely coupled. | ❀Sufficient passband, the original winding inductance is large, the leakage inductance is small, the influence of hysteresis loss can be reduced. | ❀Stable performance, high reliability, convenient to use. | ❀Used as components for circuits such as voltage amplification and power output in radio communication, broadcast television, and automatic control.

Package Included: 10pcs 4X4 matrix array membrane switch keypad keyboard 16 keypad keyboard | 4x4 keypad Parameters: Circuit Rating: DC 35V, 100mA, 1W; Contact resistance: 10- 500Ω; Insulation resistance: 100MΩ 100V; Dielectric Strength: 250VRms (50 ~ 60Hz 1min) | 4 x 4 Matrix Array Membrane Switch Keypad: usually is used as input in a project. It has 16 keys totally, which means the same input values. It's ultra-thin, easy to interface with any microcontroller and has an adhesive backing for easy mounting | 4x4 Matrix Keyboard Application: 4x4 keypad is a great way to let users interact with your project. You can use them to navigate menus, enter passwords, and control games and robots | Service Guarantee : If you have any questions, please feel free to contact us to get the most satisfactory results

Size: 5x5mm | Chip: NTAG213 (215/216/icode x/ Fudan F08 can be customized) | Induction distance: about 8-20mm (depending on the card reader) | Use: Bluetooth headset, Bluetooth speaker pairing, support IC card access control function | Working frequency13.56MHz; Maximum gain value 1.5dbm; Standard 14443A, 144 BYTES memory;Number of reads and writes >=100,000 times

Dust plugs cover set fits the ports of 2020 2019 MacBook Pro 16 inch Model A2141, 2020& 2019 & 2018 MacBook Air 13-inch Model A2179 A1932, 2020 & 2019 & 2018 & 2017 & 2016 Release Apple MacBook Pro 13" 15" Model A2159/A1989/A1706/A1708/A1990/A1707 and MacBook 12 Inch with Retina Model A1534. Please kindly check the model number "A1xxx" on the back of the macbook before your purchase. Not Compatible with any MacBook previous models. | 8 pieces Thunderbolt 3 USB-C port plugs and 2 pieces 3.5 mm headphone port plugs | Made of high quality durable and eco-friendly silicone material | Simply plug the anti dust dirt plug set into the ports of your macbook, protect the device against infiltrating dust, lint and dirt in headphones and ports | This anti dust dirt protection set is only compatible with 2019 MacBook Pro 16 inch Model A2141, 2020 & 2019 & 2018 MacBook Air 13-inch Model A2179 A1932, 2020 & 2019 & 2018 & 2017 & 2016 Release Apple MacBook Pro 13" 15" Model A2159/A1989/A1706/A1708/A1990/A1707 and MacBook 12 Inch with Retina Model A1534 that with Thunderbolt 3 ( USB 3.1 Type C ) ports