Perfectly works with: Comcast, Xfinity, RCN, Optimum, Wow, COX, Spectrum and many more cable providers. Not recommended for Verizon, Direct TV and Century Link. | -45 dBmV Spurious and Harmonics after 5 Surges of 6 kV Ring Wave with a +55 dBmV Return Signal | 6 kV Ring Wave Surge Protected. Eclipse Contact Technology (ECT) F-Port. Digital Broadcast, HDTV and MoCa Ready | Flat 1002 MHz Bandwidth with Minimal Insertion Loss. 35 dB Return Path Output Return Loss and 40 dB Port-to-Port Return Band Isolation. | Capacitively Coupled F-Ports. SCTE Compliant F-Ports with 1 inch Port Spacing. 100% Soldered Back

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug USB Type C ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V gigabit PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug USB Type C ), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input, please note: this spitter is only compatible with 10/100Mbps Non-PoE devices, it DOES NOT support gigabit Non-PoE devices | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max. | Main body is made of waterpoorf desgin (one-piece injector molding) | Data Rate: 10/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant | Available with IP camera, Voip phone, AP and other 12V Non-PoE devices | Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

Output Power: DC 5V 2.4A 12watts Max., full IEEE 802.3af compliant. | Input Power Voltage: DC 44-56V | Data Rate: 100/100Mbps; DC Jack: Micro USB | Available with Tablets, Dropcam or Raspberry Pi, IPC, IP Camera and more | Package content: 2x PoE splitter

Output Voltage: 5V/9V/12V DC adjustable voltage,up to 18-24watts | Data Rate: 100/100/1000Mbps, full IEEE 802.3af compliant,Deliver power up to about 328.1 feet(100 meters) | Input Voltage: DC 36-48V, Gigabit Ethernet network,Plug-and-Play | Works with IP camera,IP phone, AP and other 5v/9v/12v Non-POE devices, Require no configuration | Warranty: Two Years; Package content: 2x 5V/9V/12V PoE splitters

Rated Voltage: 24V DC, Current: 0.06A | Bearing Type: Dual Ball Bearings, low noise, long life:50000H | Airflow: 5.07CFM, Air Pressure: 2.45mmAq, Speed: 6000PRM, Noise: 23.20dBA | Lead Wire: fit in 2-PIN-2.5mm connector, length: 150mm / 5.90inch, Dimension: 40mm x 40mm x 10mm | Warranty: 2-years, Package: 2x 24V DC brushless fans

5V DC power output ( 2.4A / 12watts Max.), 10/100/1000Mbps ethernet data rate, IEEE 802.3af compliant | Input Power Voltage: DC44-56V from poe switch or poe injector, deliver power up to about 100m (328 feet) | Plug-and-Play - Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | Works with Raspberry Pi 3B+ and previous models / IP Camera / Tablets / Dropcam or other devices with 5V Micro USB input | 2-Years warranty and unlimited technical support, Package content: 2x PoE gigabit splitter

A great solution for PoE devices, the injector can be used to power PoE devices (built-in poe function or module) such as PoE IP Phone / IP cameras / Access Points etc | The poe injector is also works with non-poe devices, but a extra poe splitter will be required between this poe injector and non-poe devices | Plug and Play: provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 1000Mbps, the device has a compact size makes it easy to install the adapter into areas where space is limited, without no configuration required | Hight Power: Input: AC100-240V 50/60Hz, Output: Data & Power (output voltage: 48V, output current: 0.8A, 1.0A max.), make it NOT ONLY works with IEEE 802.3af devices, BUT ALSO with high-power devices like 802.3at devices (more than 30 Watt), Such as IP PTZ camera, big power AP etc | Warranty: 2 years

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug USB Type C ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input | WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V gigabit PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., plug micro USB), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector, deliver power up to about 100m (328 feet) | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that have a 5V micro USB input and a ethernet input, such as IP camera, Tablets, Dropcam or Raspberry Pi and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices like Raspberry Pi 3B+ | WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices | WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V PoE splitter

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max. | Main body is made of waterpoorf desgin (one-piece injector molding) | Data Rate: 100/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant | Available with IP camera, Voip phone, AP and other 12V Non-PoE devices | Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

Output Power: DC 5V 2.4A 12watts Max., full IEEE 802.3af compliant. | Input Power Voltage: DC 44-56V | Data Rate: 100/100Mbps; DC Jack: Micro USB | Available with Tablets, Dropcam or Raspberry Pi, IPC, IP Camera and more | Package content: 4x 5V PoE splitter

BNC to BNC extension cable, matched BNC connectors | Thin-line flexible cable with Black BNC male connectors for video audio signal transmission | Wire color: Black, BNC connector:Black | L=3.3ft/1m | Warranty: Two Years

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more | WARRANTY: 2 years and unlimited technical support, Package content: 1x 5V PoE splitter

Output Voltage: 5V/9V/12V DC adjustable voltage, up to 18-24watts | Data Rate: 100/100/1000Mbps, full IEEE 802.3af compliant | Input Voltage: DC 36-48V, Gigabit (10/100/1000Mbps), Plug-and-Play | Works with IP camera, IP phone, AP and other 5v/9v/12v Non-POE devices, Require no configuration | Warranty: Two Years; Package content: 1x 5V/9V/12V PoE splitters

Built-in super wide angle camera ensures a 120 degree identification. | The ergonomics design ensures an easy installation and can adopt different heights of people. | FacePass 7 is equipped with a new Linux CPU, implementing a face-capturing of less than 1 second, and a recognition time within 0.5 seconds. | Equipped with new AI deep learning architecture and infrared live detection technology, FacePass 7 provides 24/7 accurate identification and effectively prevents fake faces such as photos or videos. | Flexible communication for WiFi, 4G or Lan. Convenient management for Web-server and PC software.

Anviz AFOS Optical Fingerprint Sensor | Mini USB Slave communication | Optional Bule tooth, Battery

Quick Balance Collapsible Grey/ White Reflectance Panel- A must have photography rig for setting manual white balance and exposure, removing photo color cast and achieve accurate color representation for the photo. | Gray Balance- With printed target in the middle, works for 18% exposure correction (max error deviation 1/8 of F-stop), Density 0.74. | White Balance- Neutral white side on the reverse for white balance setting. | Easy to Use- This 18% grey/white card simplifies the complex technical issues,can be used for in-camera white balance or post-processing white balance. Works with any digital camera. Perfect for DSLR, Video, Film ,Studio and Photography. | Collapsible Pop Up Design- 12 x 12 Inches (30x30cm). Tightly fold down to a compact size, perfectly fits in your bag. Package includes 1x gray/white Balance card; 1 x carry bag.

This super clamp is made of solid anti-rust stainless steel + black anodized aluminum alloy for high durability. | Can mount virtually everywhere you need like cameras, lights, umbrellas, hooks, shelves, plate glass,cross bars, even other super clamps. | Comes with 1/4"-20 and 3/8"-16 thread for setting up other configurations. | Max open(approx.):2.16inches( 54mm); Total Length: 35"(89mm).Recommend clamp product 0.59"-1.25" max for tubing diameter. | Net weight: 4.58oz. Comes with 2pieces Super Clamp. Note:This is not similar in size to the original Manfrotto Super Clamp. This clamp is smaller and designed only for light-weight applications.(Best weight load:0.5-2kg)

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder. | Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe. | A hole with locking screw in middle specially designed for holding umbrella. | Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle. | Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system.

Universal Camera Hot Shoe Flash Stand for dslr camera,Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony). | With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included). | A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand. | Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5") | Package includes 2pcs of camera hot shoe flash stands. Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG".

Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony). | With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included). | A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand. | Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5") | Package includes 4pcs of camera hot shoe flash stands.Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG".

Help keep the camera LEVEL,Very convenient to use. | Rubberized surface,protect your hot shoe from getting bent or damaged. | Precise Replacement Hot-Shoe Cover, Dust Cap,help to keep moisture and dust from the hot shoe. | Innovative circular design takes up less space than blocky 2- or 3-axis levels. | Very easy to install,Design for Canon Nikon Panasonic Fujifilm Olympus Pentax Sigma Sony(after 2012)DSLR/SLR/EVIL Camera and more! Fits most cameras and remains unobtrusive.Package includes 2 pcs of hot shoe cover caps.

This Hot Shoe Cover helps keep the camera LEVEL,Very convenient to use. | Rubberized surface,protect your hot shoe from getting bent or damaged. | Precise Replacement Hot Shoe Cover, Dust Cap,help to keep moisture and dust from the hot shoe. | Innovative circular design takes up less space than blocky 2- or 3-axis levels. | Very easy to install,Design for Canon Nikon Panasonic Fujifilm Olympus Pentax Sigma Sony(after 2012) DSLR/SLR/EVIL Camera and more! Fits most cameras and remains unobtrusive.Package includes ONE pc of hot shoe cover.

Comes with a Hot Shoe Mount, an Adapter compatible with Gopro, can install GoPro Hero camera on your DSLR or ring light. Note: this Adapter compatible with gopro Is Suitable for Underwater Use,While Metal Hot Shoe Is Not Suitable for Underwater Use. | This hot shoe mount kit is used for taking photo with camera and shooting video with GoPro Hero action camera simultaneously. | Hot Shoe Mount - International Standard with 1/4"-20 tripod screw adapter to mount your microphone, LED light, monitor to DSLR, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle. | Mount Adapter Compatible with Gopro- With 1/4”-20 screw on bottom to allow to install on a tripod/ monopod. It can be rotated and titled to desired angles. | Easy to use.

2Pieces of Hot Shoe Mount-Flash hot shoe mount with 1/4"-20 tripod screw adapter, to mount your microphone, LED light, monitor to DSLR, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle. | 2Pieces of Metal Cold Shoe Mount-Metal cold shoe with 1/4"-20 threaded hole to mount your flash onto bracket.Work on monitor,ring light, Compatible with Canon/Nikon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe. | Material: Metal construction with black anodized for higher durability. | Easy to use.Combo pack flash shoe mount makes a wiser choice! | Package includes 2x hot shoe mount+ 2x metal cold shoe mount .

Neutral 18% Grey / Gray Card with matte finish for scratch resistant. Non Reflective and Waterproof. | Perfect for setting exact color balance. Works with any digital camera. Perfect for DSLR, Video, Film and Photography. | Index Card size: 5x4 Inches.Medium size.Comes with premium landyard for easy carrying. | Compact, sturdy and Lightweight. | Package includes three color calibrated reference cards+premium landyard with a detachable clip.

Neutral 18% Grey / Gray Card with matte finish for scratch resistant. Non reflective and waterproof. | Perfect for setting exact color balance. Works with any digital camera. Perfect for DSLR, Video, Film and Photography. | Card size:3 1/3*2 1/8 inches( 8.5*5.4cm). Small enough to keep in your pocket or on a keychain. | Compact, sturdy and Lightweight. Net weight:35.5g | Package includes three color calibrated reference cards+premium landyard with a detachable clip.

Neutral 18% Grey / Gray Card with matte finish for scratch resistant. Non Reflective and Waterproof. | Perfect for setting exact color balance. Works with any digital camera. Perfect for DSLR, Video, Film and Photography. | Large Size 5.3"x 7.28" (13.5*18.5 cm) for easy setting. | Compact, sturdy and Lightweight. | Package includes three color calibrated reference cards+premium landyard with a detachable clip.

Combo Pack- Package includes 1X Two Axis Hot Shoe Level; 1X Hot Shoe Cover. Easily serve your demands. With these combo pack hot shoe level and hot shoe cover, you can take a level photo and dont have to straighten your photos in Photoshop. | 2Axis Hot Shoe Bubble Level- The camera bubble level is idea for landscapes and architectural photography that allows positioning of horizontal and vertical axis simultaneously. | Hot Shoe Cover- Help keep the camera LEVEL and ,protect your hot shoe from getting bent or damaged. | Widely Compatible- The hoe shoe level and hot shoe cover are compatible with standard camera shoe for Canon Nikon Panasonic Fujifilm Olympus Pentax Sigma DSLR/SLR/EVIL Camera and more! | Easy to Use- Simply slides into the camera hot shoe. Note: Please mind the hot shoe cover install direction.

Combo Pack- Package includes 1X Three Axis Hot Shoe Level; 1X Two Axis Hot Shoe Level;; 2X Hot Shoe Cover. Easily serve your demands. With these combo pack hot shoe level and hot shoe cover, you can take a level photo and dont have to straighten your photos in Photoshop. | 3 Axis & 2Axis Hot Shoe Bubble Level- The camera bubble level is idea for landscapes and architectural photography that allows positioning of horizontal and vertical axis simultaneously. | Hot Shoe Cover- Help keep the camera LEVEL and ,protect your hot shoe from getting bent or damaged. | Widely Compatible- The hoe shoe level and hot shoe cover are compatible with standard camera shoe for Canon Nikon Panasonic Fujifilm Olympus Pentax Sigma DSLR/SLR/EVIL Camera and more! | Easy to Use- Simply slides into the camera hot shoe. Note: Please mind the hot shoe cover install direction.

Easy to use.Precision made mic stand adapter microphone to tripod adapter. | 1x 5/8 to 1/4 Adapter- 1/4"-20 Male to 5/8"-27 Female Thread Adapter for Microphone Mounts and Stands. | 1 x 5/8 to 3/8 Adapter- 3/8"-16 Male to 5/8"-27 Female Thread Adapter for Microphone Mounts and Stands. | Material :Nickel Brass | Package includes 1 piece of 5/8 to 1/4 Adapter mic stand adapter;1 piece of 5/8 to 3/8 Adapter microphone stand adapter.

Precision made brass mic stand adapter microphone to tripod adapter for mounting cameras, LCD monitors, recorders, tripod adapters and other accessories on a microphone stand. | 2pack 5/8 to 1/4 Adapter- 1/4"-20 Male to 5/8"-27 Female Thread Adapter for Microphone Mounts and Stands. | Material :Brass | Easy to use. | Package includes 2pc of 1/4”-20 to 5/8”-27 Male to Female Mic Stand Adapter.

Universal Phone Holder with Cold Shoe Mount on Top + Gopro Adapter and screw + Hot Shoe Mount. This phone holder kit can build various configuration by installing mobile phone/action camera on your dslr camera/ ring light/tripod, and adding a microphone or light on top for better shoots. | 【Adjustable Phone Holder with Cold Shoe on Top】- Universal phone clamp compatible with most smartphone within 2.4-3.3 inches (6-8.5 centimeter) such as iPhone 12 11 pro max x xr, Samsung. Enable to attach a microphone or small flash light on top for better shooting. | 【Gopro Adapter &Tiltable Screw】- This gopro mount adapter enables horizontal and vertical based angle rotation. You can easily rotate the phone kit/ Gopro Hero 9 8 7 6 5/ DJI OSMO/Action Camera to desired angles by twisting the fixing knob and tiltable screw without using any tools. | 【Removable Hot Shoe Mount】- Bottom hot shoe adapter allows your to attach the whole phone kit to a dslr camera or ring light. It can be removed to attach the phone kit to a tripod via its 1/4” bottom screw. | This cell phone holder shoe mount is a smart mounting sulotion for recording with your camera/ phone/ gopro hero action camera at the same time.

This is a reflector stand holder light stand clip. Perfect for positioning your reflectors,background,backdrops. | This reflector holder is especially useful for photographers who work alone and need help supporting a reflector disc backdrop background. | Simple to use / Just attach the reflector to the stand via the reflector holder and position as needed | Made from aluminum alloy with satin silver finish. Weight 2.35 oz. Easy to assemble . | Package comes with a reflector holder clips.Note: The reflector and light stand are not included.This reflector holder clip hangs the reflector straight down and the reflector angle is not adjustable.Please check before purchase.

Package includes: 6-Pack replacement Dymo d1 label tape. Width for each tape: 1/2 Inch (12mm). Length for each tape: 23 Feet (7m). Colors in one set: Black on Clear (Equivalent to DYMO 45010), Black on white (Equivalent to DYMO 45013), Black on Blue (Equivalent to DYMO 45016), Black on Red (Equivalent to DYMO 45017), Black on Yellow (Equivalent to DYMO 45018), Black on Green (Equivalent to DYMO 45019) | Compatible with: DYMO LabelManager 160, DYMO LabelManager PnP, DYMO LabelManager 210D, DYMO LabelManager 220P, DYMO LabelManager 260P, DYMO LabelManager 280, DYMO LabelManager 360D, DYMO LabelManager 420P, DYMO LabelManager 450D, | DYMO LabelManager 500TS, DYMO LabelManager 100, DYMO LabelManager 150, DYMO LabelManager PC II, DYMO LabelPoint 100, DYMO LabelPoint 150, DYMO LabelPoint 350, DYMO Label Writer 400 Duo, DYMO Label Writer 450 DUO and etc. | Features: These Anycolor replacement dymo d1 label maker refills are easy to install and use. The plastic label tape is great to print clear and durable labels. Split backing makes the labels very easy to peel off. No sticky residue remains when the labels are removed. | Applications: These replacement Dymo label maker refills are perfect for outdoor and indoor applications, including in homes, offices, schools and hotels, for labeling files, folders, shelves, books, accessories, etc.