Lens Cap Cover Keeper Protector for Sony FE 28-70mm F3.5-5.6 OSS Full-frame E-mount Zoom Lens

Lens Cap Cover Keeper Protector for Tamron AF18-200mm, 18-200mm, 28-300MM, 18-270mm F/3.5-6.3 XR Di III VC PZD

Lens Cap for Insta360 X3: Silicone case for insta360 x3 lens cover .The inside and surface of the lens cover are polished,smooth and soft,and well used to protect the camera.The size of the product matches the lens perfectly, which is easy to install and remove | Case for Insta360 X3: The protective sleeve is carefully designed according to the proportion of the camera, and the corresponding design is made at each key and interface position. While playing a protective role, it does not affect the normal use of the camera.The case protects the X3 camera from scratches and keeps the camera in good physical condition. | Silicone Base for Insta360 X3: The base allows the X3 to stand upright for easy use on the desktop. The base is large enough to stabilize the camera. The surface is grinded, and the smooth feel is excellent. | Material: All components are made of high-quality silicone.

Lens Cap and Screen Protector effectively protect the insta 360 X4 from high-impact drops, scratches, abrasions and bumps. | Lens cap for Insta360 X4 protects the lens from dust or abrasion during storage. | The lens cap is made of soft silicone, durable, lightweight, and easy to clean. | The Screen Protector 99.99% High Transparency , no distortion of pixels. Anti-Scratch Anit-finger Anti-oil Anti-dust. | Package include: 1*lens cap, 2*Screen Protector and Installation Kit

Durable and Strong - The lens cover and camera cover are made of high‑quality hard plastic, strong and reliable. | Protector Camera & Lens - Help to prevent dust from camera parts, especially to prevent smudges and scratches from lens. | Portable and Easy to carry - Small in size and light weight, convenient for carry and storage, not take up space. | For FD Mount Camera - Compatible for Canon FD mount lens and camera, high performance and well fitness. | Photography Accessory - Sturdy protects against bumps and debris to keep your camera in its best condition.

Dimension--Inner size: 2.76 x 2.95 inch of the diameter and height. Compatible with Canon 28mm f/1.8, 24mm f/2.8, 35mm f/1.8D, Nikon 35mm f/1.8G, 50mm f/1.8D, G50mm f/1.4 | Good Protection--The lining is 0.5 inch thick which makes the lens pouch anti-fall and anti-pressure and the mesh pocket inside lid for lens cap, body cap, etc. You will deserve this. It will suit for your expectation. | Waterproof--The lens pouch is made of highly dense nylon material which is waterproof, which can protect your camera lens effectively when it is out of the rain outdoors. | Dust-Proof--The raised lining design prevents dust from entering the zipper connection which offers a relatively closed environment for your lens and protect it. | After Sales Sevice--Support 30 day to return with no reason, 1 year warranty. Please contact us if you have any other question. We will responsible for any qualiy problem.

【Everything you Need】2 Pcs Rubber Rocket Air Blower Duster ,1Pcs Lens Cleaning Pen,1 Pcs Blower Brush Dust Cleaner. It comes with a fabric carrying pouch to hold the entire kit. | 【Rubber Rocket Air Blower Duster】The function of this Blower is to gently remove dust & erase smudges from delicate equipment without leaving residue. Excellent way to remove dust off sensitive camera parts without physical contact. Better for the environment than canned air. | 【Blower Brush Dust Cleaner】The air blower with soft silicone air nozzle can avoid scratching the gears, it can be easily blow away the dust and dirt. | 【Double-ended Cleaning Pen】Retractable soft brush and dual carbon-compound pad. It's efficient for clearing dust off. The cleaning pad can be applied to remove oil or moisture from those surfaces. | 【professional camera cleaning kit】It is applicable to coated lenses and sensors of almost all electronic products, such as camera lens, microscope, telescope, glasses, keyboard, notebook computer, PC tablet, printer, computer, mobile phone and other optical components and digital electronic products

The set includes (6 booklets/50 sheets each) lens cleaning paper and 1 pc double-sided cleaning cloth (6.6 inch x 6.2 inch) Black Side: Microfiber & Blue Side: Suede. Each lens cleaning sheet is a great tool to achieve a lint-free lens. The very fine fibers of the double-sided cloth is perfect to pick up grease and dirt. | There are a total of 300 sheets in this pack. Our cleaning papers are ideal for cleaning camera and camcorder lenses. Great for telescopes, magnifying glasses, microscopes, digital cameras and other precision optics. Safe for coated lenses. These are made with very soft, non-damaging and strong material. Dry lens cleaning tissues effectively removes dirt, grease and fingerprints. | The microfiber cleaning cloth can be used to quickly remove fingerprints, dust and smudges from electronic screens, glasses, smartphones, tablets, and LCD screens. Whether it be cleaning display cabinets at home or wiping office desktop screens, these cloths are handy and will leave the surface dirt-free. | Both the cleaning cloth and the lens cleaning paper are intended for use on delicates surfaces. Use each sheet to clean the exterior part of your camera lens. Use it once and dispose. The cloth combines suede on one side and soft microfiber on the other. Both sides are great for cleaning the screen of smartphones, laptops, tablets, TVs, glasses, and watches. | You can use the lens cleaning paper on the surface of the lens to remove any dust that can affect the quality of the photo. The double-sided cleaning cloth is perfect to wipe away the dust and dirt without worrying about any damaging marks or scratches.

Quantity included: 12 Pack | Compatibility: Lenses, filters | Will Not Harm Optical coating | Enzyme Activated / Eco Responsible | Towelettes are Made From Soft Fibers

The lens tripod ring makes it easy to mount the telephoto lens camera to a tripod for balancing body. | High grade corduroy inside to keep the endoscopic body will not be scratched, suitable for 70‑200mm F4 Lens. | It is processed by baking paint process, and is resistant to oxidation and . | It is processed by baking paint process, and is resistant to oxidation and . | The lens tripod ring makes it easy to mount the telephoto lens camera to a tripod for balancing body.

1. The tripod socket is Compatible with Sigma Lenses: 60-600mm f/4.5-6.3 DG OS HSM Sports, 70-200mm f/2.8 DG OS HSM Sports, 500mm f/4 DG OS HSM Sports, and 150-600mm f/5-6.3 DG OS HSM Sports; Not compatible with Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens and other lenses; | 2. Improvements made on the basis of original tripod mount base; 3/8 screw hole and stainless-steel anti-skid nails are added; finger position is added, easy to grasp; strap hole is added, easy to hang; | 3. Bottom is 39mm Arca fit quick release plate feature, compatible with RRS / ARCA-SWISS 39mm fit tripod head clamp; | 4. Made of Aviation aluminum, CNC precisely machined, anodized surface, with stainless steel screws; the volume is about 12 x 4.2 x 2cm (including screw), net weight is about 125g; the data of the mounting holes are collected from Sigma original lens; | 5. Package Includes: 1 x iShoot Lens Collar Foot IS-THSM1560 (Note: The other items in the photos not listed here are for illustrating only, not included).

1. This lens collar replacement foot is tailor-made and compatible with Sony E 18-110mm f/4 G OSS PZ, FE 70-200mm f/2.8 GM OSS, FE 100-400mm f/4.5-5.6 GM OSS, and FE 70-200mm f/2.8 GM OSS II Lens; can't be used for other lenses. | 2. The tripod socket is referencing to and modified from original standard design, details are improved, adopts lightweight design of hollow, with stainless steel screw, net weight is about 105g; it is about 90mm long, 65mm wide and about 31mm high. | 3. The tripod collar stand bottom is added 90mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 4. The Lens collar base bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly. | 5. The tripod mount ring base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

Made of Aviation Aluminum CNC precisely machined, hand-polished, anodized surface with non-slip rubber and 1/4" stainless steel screw and spring | Referring to the original structure design, added the features of finger position and quick release plate, the volume is about 82mm x 38.5mm x 30mm, net weight is about 100g | Replaces the original tripod mount base of Canon EF 100-400mm f / 4.5-5.6L IS II USM lens, bottom is quick release plate of Arca-Swiss standard interface, compatible with RRS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE ball head, suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-70BK / IS-JZ80BK, etc | Package includes:1 x Lens Tripod Mount Ring Base IS-THDZ(Note: The other items in the photos not listed here are for illustrating only, not included)

1. The tripod mount ring support base is tailor-made and compatible with Nikon Nikkor Z 70-200mm f/2.8 VR S & Nikkor Z 100-400mm f/4.5-5.6 VR S Lens, can't be used for other lenses; the measured volume of the replacement foot is about 93 x 65 x 31mm (without screws), and net weight is about 100g; | 2. The lens collar foot adopts original structure design, the appearance is improved, and the extension function is added. Including wave-shaped handle, screw holes at both ends, petal-shaped locking knob; | 3. The tripod collar stand bottom is added 60mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 4. The Lens collar base bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly. This lens collar support base bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK; | 5. The tripod mount ring base is made of Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

1. The lens tripod mount ring replacement foot is referencing to and modified from original factory design, nd the size is same as the original one; details are improved; bottom added the feature of Arca-Swiss fit quick release plate, more practical; | 2. The lens replacement foot is Only compatible with Nikon Nikkor AF-S 500mm f/5.6E PF ED VR and Nikkor AF-S 70-200mm f/2.8E FL ED VR lens; NOT compatible with Nikkor Z 70-200mm f/2.8 VR S, Nikkor AF-S 70-200mm f/2.8G ED VR, Nikkor AF-S 70-200mm f/2.8G ED VR II, and other 70-200/2.8 lenses; | 3. The lens collar replacement base is made of aviation aluminum, CNC precisely machined, anodized surface, with spring clip, knob lock and stainless-steel anti-skid nails; | 4. Bottom is Arca-Swiss fit quick release plate, compatible with RRS / ARCA-SWISS Fit Tripod Head & Clamp, and the length of the plate is about 70mm, reserved with 1/4 and 3/8 screw holes; the stainless-steel limit screws at the bottom are removable; | 5. The lens collar foot IS-THN720II can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto 50 structure; or combined with iShoot long focus lens support IS-TB02 (Sold Separately), for protecting the lens bayonet.

1. The tripod socket is Compatible with Sigma Lenses: 60-600mm F4.5-6.3 DG DN OS Sports, 150-600mm F5-6.3 DG DN OS Sports, 60-600mm f/4.5-6.3 DG OS HSM Sports, 70-200mm f/2.8 DG OS HSM Sports, 500mm f/4 DG OS HSM Sports, and 150-600mm f/5-6.3 DG OS HSM Sports; Not compatible with Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens and other lenses; | 2. The lens foot Improvements made on the basis of original tripod mount base; 3/8 screw hole and stainless-steel anti-skid nails are added; finger position is added, easy to grasp; strap hole is added, easy to hang; | 3. The lens collar base bottom is 39mm Arca fit quick release plate feature, compatible with RRS / ARCA-SWISS 39mm fit tripod head clamp; | 4. The tripod mount ring stand is made of Aviation aluminum, CNC precisely machined, anodized surface, with stainless steel screws; the volume is about 12 x 4.2 x 2cm (including screw), net weight is about 125g; the data of the mounting holes are collected from Sigma original lens; | 5. The replacement foot IS-THSM1560 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure.

1. The tripod mount ring support foot is tailor-made and compatible with Canon RF 600mm F11 IS STM and RF 800mm F11 IS STM, can't be used for other lenses； | 2. The lens collar stand is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles; | 3. The tripod collar stand bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 4. The Lens collar base bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly. | 5. The tripod mount ring base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

1. The tripod mount ring support base is tailor-made and compatible with Nikon Nikkor Z 70-200mm f/2.8 VR S, Z 100-400mm f/4.5-5.6 VR S, and Z 400mm f/4.5 VR S lens, can't be used for other lenses | 2. The lens collar foot adopts original structure design, the appearance is improved, and the extension function is added. Including wave-shaped handle, screw holes at both ends, petal-shaped locking knob; | 3. The tripod collar stand bottom is added 85mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate.The Lens collar base bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly. | 4. If you use a teleconverter, it is recommended to purchase the IS-TB01 telephoto bracket to protect the lens mount; if you want to use it for the Manfrotto fluid head, it is recommended to purchase the IS-3950PRO quick release plate converter separately; | 5. The tripod mount ring base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

1. This lens collar replacement foot is tailor-made and compatible with Sony FE 200-600mm f/5.6-6.3 G OSS Lens SEL200600G; the tripod mount ring base is adopted the original interface standard, added quick release plate feature to the bottom, more practical than similar lens collar replacement base; | 2. The lens support stand adopts lightweight design of hollow, with stainless steel screw, net weight is about 100g; it is about 105mm long, 65mm wide and about 33mm high; | 3. The bottom of the lens bracket base is 105mm detachable lengthening quick release plate, with 1/4” and 3/8” screw holes and stainless-steel anti-slip screws at the bottom; | 4. The tripod collar mount ring stand is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold; | 5. This lens holder foot bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

1. The lens collar is tailor-made for and compatible with Sigma 150-600mm f/5-6.3 DG OS HSM Contemporary Lens, cannot be compatible with Sigma 150-600mm f5-6.3 DG OS HSM Sports lens. | 2. The tripod mount ring's inner diameter is about 80.5mm, width is about 22.5mm, with 3M film inside, preventing lens from scratches; net weight is about 170g. | 3. The tripod collar bottom is added 75mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 4. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly. | 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

1. Made of aviation aluminum materials, CNC precision machining, anodized surface, with stainless steel screw, light weight hollow out design, net weight is about 160g; | 2. Referring to and modified from Nikon original standard design, structure is enhanced, details are improved, and add the function of quick release plate, more practical; Suitable for Nikon AF-S 300mm F/4E PF ED VR and AF-S 70-200mm F / 4G ED VR lenses; | 3. Tripod mount ring’s inner diameter is about 68mm, using embedded flocking to increase contact surface; with three marks, convenient for lens rotation and alignment; fast spring lock, convenient for quick assembly and disassembly or adjust camera body for composition; removable quick release plate structure, reserved 1/4" and 3/8 " screw holes; | 4. Lens Collar Support Tripod Mount Ring for Nikon RT-1 Nikkor AF-S 300mm F/4E PF ED VR and AF-S 70-200mm F/4G ED VR-Bottom Quick Release Plate Feature Compatible with ARCA-SWISS 39mm Fit Ball Head; | 5. Quick release plate is AS 39mm standard, compatible with ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for IS-JZ30 / IS-JZ50 / IS- JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

1. The tripod mount ring is compatible with Fuji XF 55-200mm f/3.5-4.8 R LM OIS and XF 70-300 F4-5.6 R LM OIS WR Lens, can't be used for other lenses. | 2. Tailored to the shape and structure of the lens, retaining the switch function, the tripod ring fits tightly with the lens, and the mounting position cannot be attached with the sticker. If there is one, remove it, otherwise, the tripod ring cannot be installed; after installation, the camera can only shoot horizontally, not vertically, or be rotated. | 3. The tripod ring adopts irregular shape, the edges and corners are polished. The tripod mount ring's inner diameter is about 67mm, width is about 17mm, with 3M film inside, preventing the lens from scratches; net weight is about 135g. | 4. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 5. The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly. The lens collar IS-XF2250 can be combined with clamp mount converter IS-3950MFT (Sold Separately), which can be used for hydraulic heads with Manfrotto structure.

1. The lens collar is tailor-made and only Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens (EF and F Mount), Not Compatible with Sigma 100-400mm f/5-6.3 DG DN OS (E-mount and L-Mount) and other lenses； | 2. The tripod mount ring is tailored to the lens. Cannot be rotated, with 3M film inside, inner diameter is about 84mm, width is about 23mm; | 3. Bottom is added quick release plate feature, plate length is about 70mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 160g; | 4. Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / ISHOOT tripod ball head of Arca 39mm fit, for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp. | 5. The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, surface polished and anodized, with stainless steel screw.

1. This lens collar is tailor-made and compatible with Sony FE 135mm f/1.8 GM, FE 50mm f/1.2 GM, FE 12-24mm f/2.8 GM, E 16-55mm f/2.8 G, E 70-350mm f/4.5-6.3 G OSS; Arca fit quick release plate feature is added to the bottom, more practical; | 2. The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 150g; positioned by the switch and bayonet. Cannot be rotated. All corners of the lens collar are grinding rounded, with 3M film inside for protecting the lens from scratches; | 3. The bottom of the lens bracket is 55mm detachable Arca-swiss fit quick release plate, with 1/4" and 3/8" screw holes and stainless-steel anti-slip screws at the bottom for fixing lens to tripod directly; | 4. The tripod collar bottom is added 55mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 5. The tripod mount ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

1. This lens collar is tailor-made and compatible with Sony FE 135mm f/1.8 GM, also compatible with Tamron 17-28mm f/2.8 Di III RXD A046, 28-75mm f/2.8 Di III RXD A036, 70-180mm f/2.8 Di III VXD A056, 17-70 f/2.8 Di III-A VC RXD B070, 28-200mm f/2.8-5.6 Di III RXD A071, 70-300mm f/4.5-6.3 Di III RXD A047 (E-mount) lens; | 2. The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 150g; positioned by the switch and bayonet. Cannot be rotated. All corners of the lens collar are grinding rounded, with 3M film inside for protecting the lens from scratches; | 3. The bottom of the lens bracket is 55mm detachable Arca-swiss fit quick release plate, with 1/4" and 3/8" screw holes and stainless-steel anti-slip screws at the bottom for fixing lens to tripod directly; | 4. The tripod collar bottom is added 55mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. | 5. The tripod mount ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

This iShoot tripod mount ring is tailor-made for Sony FE 12-24mm F4 G, FE 85mm F1.8 and so on; the net weight is about 155g; | The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized, with stainless steel screw; | This camera lens bracket cannot be rotated. Tailor-made according to the lens. Positioning by the switch and bayonet. All corners are grinding rounded, using 3M plastic film inside to prevent lens wear; | The inner diameter of the lens support is about 61.5mm and the width is about 18mm. Added the function of quick release plate. The length of the plate is about 55mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screws; | Bottom quick release plate is AS standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit.

This lens collar is tailor-made for Sony FE 135mm f/1.8 GM, Sony E 70-350mm f/4.5-6.3 G OSS, Sony E 16-55mm f/2.8 G, Tamron 28-75mm f/2.8 Di III RXD FE Mount, Tamron 17-28mm f/2.8 Di III RXD FE Mount; quick release plate feature is added to the bottom, more practical; | The lens support adopts lightweight design of hollow, with stainless steel screw, net weight is about 150g; the inner diameter of the tripod ring is about 62.5mm, the width is about 18mm; positioning by the switch and bayonet. Cannot be rotated. All corners of the lens collar are grinding rounded, with 3M film inside for protecting the lens from scratches; | The bottom of the lens bracket is 55mm detachable quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom; | The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold; | This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.

The lens collar is designed and improved with reference to and compatible with Sigma original TS-111; the tripod collar is tailor-made and compatible with Sigma 105mm f/1.4 DG HSM Art (EF/FX/FE/L Mount) & Sigma 100-400mm f/5-6.3 DG DN OS (E / L Mount); Not Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary (EF / F Mount) lens and other lenses; please check your lens mount carefully before purchasing the item; | The net weight of the tripod mount ring is about 170g, inner diameter is about 82mm, width is about 18mm, the inner wall has grooves and notches, and 3M plastic protective film is attached; locking knob with non-slip design； | The tripod collar bottom is added 65mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without dovetail groove; | The Lens support bottom reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly; | The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

Lens Protection: The cushioning foam inside the lens cover protects your camera's lens from scratches and dust. | Close Fitting Protection: The shape and size are designed accurately, and can work properly after correct installation to fit and protect the lens. | Prime Material: This camera lens cover is made of premium alloy material, sturdy and durable not easy to damage can be used for a long time. | Small and Portable: This lens protector cover is lightweight and small in size, easy to carry and use, bringring good use experience. | Applicable Models: This camera lens protector cover is suitable for instax mini EVO camera, practical and convenient.

✅【For GO3/GO2】Rszfnjxry CPL+ND8+ND16+ND32 lens fitler kits,precisely engineered for Insta360 GO 3/GO 2 camera. | ✅【Waterproof】The filter has a built-in rubber ring to prevent water from entering the camera. | ✅【High Quality】It is made of advanced multi coated optical glass,clear and hard enough,providing crystal clear images | ✅【The Role of ND】The ND Filters give you the freedom to create your own work by allowing you to have more control of the camera's aperture, exposure time and sensor sensitivity settings. It helps you reduce the amount of light coming into the sensor. ND Filters Eliminate Washed Out Photos & Video Due to Bright Sunlight for Better Contrast & Rich Color. | ✅【The Role of CPL】The CPL filter helps to remove unwanted reflections such as scattered light in the air, the reflection of metal and water, allows only parallel light to pass through to increases color saturation, creating deep, rich scenic images.

Gradient purple filter is a blend of blue and red, and is often used in landscape photography to bring out a dreamy purple effect. And the gradient orange filter is mainly used to shoot sunrise and sunset, which can make the originally monotonous sunrise and sunset scene more layered and mic. | 37mm Gradient Filter is Multilayer nanometer coating technology, the lens filter has waterproof and anti scratch performance to protect the lens from dust and scratches. For , for Nikon, for , for , for film Camera Lens with 37mm / 1.5in Interface | The gradient red filter is suitable for enhancing the red tones in the picture, making the scene more vivid and layered. It is used to shoot scenes such as maple leaves, sunset, evening glow or desert dunes in the evening. | The gradient gray filter is mainly used for exposure balance. When the sunlight is strong and the contrast with the ground is large, the lens can reduce the amount of light incident on the lens to avoid the appearance of white sky or dark ground. | Gradient yellow filter is suitable for wheat waves, grassland, rape blossoms, etc., highlighting the gorgeous colors, and is one of the most important filters for photographic art creation. It will make you possess all-new experience,loving and enjoying your every photo after using it.

Gradient purple filter is a blend of blue and red, and is often used in landscape photography to bring out a dreamy purple effect. And the gradient orange filter is mainly used to shoot sunrise and sunset, which can make the originally monotonous sunrise and sunset scene more layered and mic. | 40.5mm Gradient Filter is Multilayer nanometer coating technology, the lens filter has waterproof, oilproof, , and anti scratch performance to protect the lens from dust and scratches. | The gradient red filter is suitable for enhancing the red tones in the picture, making the scene more vivid and layered. It is used to shoot scenes such as maple leaves, sunset, evening glow or desert dunes in the evening. | The gradient gray filter is mainly used for exposure balance. When the sunlight is strong and the contrast with the ground is large, the lens can reduce the amount of light incident on the lens to avoid the appearance of white sky or dark ground. | Gradient yellow filter is suitable for wheat waves, grassland, rape blossoms, etc., highlighting the gorgeous colors, and is one of the most important filters for photographic art creation. It will make you possess all-new experience,loving and enjoying your every photo after using it.

Lens Filter is Multilayer nanometer coating technology, the lens filter has waterproof, oilproof, , and anti scratch performance to protect the lens from dust and scratches. | The gradient gray filter is mainly used for exposure balance. When the sunlight is strong and the contrast with the ground is large, the lens can reduce the amount of light incident on the lens to avoid the appearance of white sky or dark ground. | The gradient red filter is suitable for enhancing the red tones in the picture, making the scene more vivid and layered. It is used to shoot scenes such as maple leaves, sunset, evening glow or desert dunes in the evening. | Gradient yellow filter is suitable for wheat waves, grassland, rape blossoms, etc., highlighting the gorgeous colors, and is one of the most important filters for photographic art creation. It will make you possess all-new experience,loving and enjoying your every photo after using it. | Gradient purple filter is a blend of blue and red, and is often used in landscape photography to bring out a dreamy purple effect. And the gradient orange filter is mainly used to shoot sunrise and sunset, which can make the originally monotonous sunrise and sunset scene more layered and mic.

【Capacity】The lens filter case can holder 1PCS 82mm/86mm/95mm/105mm lens filter (Up to 0.47" Thick). Note: The filters are not include.Small Size: 5.59''x 5.19''x0.78'' (142x132x20mm),easy to put in the bag for storage. | 【Protection】The shell is made of quality PC material, sturdy and durable. The interior adopts TPE cushion,the edge of the interior is a water resistant seal ring to protect filters away from water and moisture effectively. | 【Moistureproof】There has one pack of desiccants silica gel on the bottom of the filter case, it has no color and physical change even when been saturated and strong moisture absorption, to keep the filter dry. Great to store and protect your lens filters. | 【Anti-Shake】Supplied three 1mm gaskets and two 3mm gaskets of different thread sizes (82mm, 86mm, 95mm and 105mm), could put the thin gasket in the bottom and the thick at the top, it can maintain the stability of the filter, prevent the lens filter from scratching and shockproof. | 【Package Include】Lens Filter Case x 1; 82mm Gasket (Thickness 1mm) x 3; 82mm Gasket (Thickness 3mm) x 2; 86mm Gasket (Thickness 1mm) x 3; 86mm Gasket (Thickness 3mm) x 2; 95mm Gasket (Thickness 1mm) x 3; 95mm Gasket (Thickness 3mm) x 2; 105mm Gasket (Thickness 1mm) x 3; 105mm Gasket (Thickness 3mm) x 2; Desiccants Silica Gel x 10

Quality Material: Filter case is made of premium nylon outside and well sewn, water-resistant and dustproof, nylon material will not damage the filter, it is worth your choice. | Protective: Lens filter pouch inner layer is equipped with a shock absorption sponge protection filter from bump and scratch, provides great protection and shock absorption for your lens. | Large Capacity: Camera filter case can place 6 pcs lens filters, square filter or round filter with maximum diameter of 82mm can be accommodated to arrange and store. | Easy to Access: Camera lens pouch very convenient to use, convenient to take out, by opening the filter pack you can see and access all your filters, and you can label the case to keep track of what's inside. | Satisfaction Service: If you have any problems, please contact us immediately. Makes sure the risk-free shopping for you, we will offer the best service to every customer. Enjoy your shopping.

This case is made of nylon material, can hold 37‑82mm circular filter and square filter. | After putting the filter into the filter bag, it can be folded up for easy carrying. | Good workmanship, protect the lens, easy classification, simple use, easy to store. | Can be loaded with commonly used sizes, round filters and square filters of various sizes. | There is no need to put a lot of lenses in the camera bag, and it is easy to find it. You can easily find the filter you want by taking out the filter bag.

MAVIC MINI/MAVIC MINI 2 LENS FILTERS: This lens filters accessories set features sharp AGC glass made in Germany with excellent grinding process, good physical and chemical properties, which is specifically designed for the DJI Mavic Mini/Mavic Mini 2 camera.6 TYPES FOR YOUR CHOICE includes MCUV, CPL, ND4, ND8, ND16, ND32. Sawtooth ridges make it easy to install/uninstall | CPL FILTER - It is mainly used to eliminate harmful non-metallic reflected light, and increase the color concentration. It also enhances blue sky, highlights white clouds, makes the picture more thorough, improves image clarity and overall creates a more expressive and vivid photo. It is also often used in shooting through glass, water and underwater scenery | ND FILTER - It reduces the amount of light in very bright conditions so that the camera can choose the correct exposure value and avoid excessive exposure. It also improves the color saturation of the picture, makes the picture more transparent and alive | MCUV FILTER - It can decrease blue cast and blue-gray causing by ultraviolet rays, increase light transmittance. Using the UV filter in high mountains or altitude increases the distance field of the shot and makes a clear shot. It also provides protection for the camera | MULTIPLE COATING OPTICS: minimize reflections, flares and improves image quality, Hydrophobic Nano coating reduces fingerprints fog, water, and dust.POLARIZED LENS FILTER: Polarized lens filters stay firmly attached, yet can be rotated easily so you can line up the correct polarization angle