Eliminate reflection for water, glass etc. | Saturate colors and increases contrast. | 100mm x 100mm x 2mm thick. | Effective in both color and black & white photography.

Lee Filters Autumn Tint Filter Set. Brand New

Lee Filters 58 Adapter Ring

Adapter ring for wide angle lenses, Fits lenses with 62 mm filter threads, Allows you to use the LEE Filters system (100 mm), Once screwed, this wide angle adaptor ring sits closer to the front element of the lens, Reduce the risk of vignetting, Aluminium thread, Compatible with 100 mm system | Filter system: 100mm system | Accesories types: Bague d'adaptation pour porte filtres | Diameter: 62 mm | Specific compatibility: Lens with standard thread

Lee Filters Seven5 Circular Polarising Filter | Unique to the Seven5 System | Clip on | Rotates independently of any graduated filter

LEE 77mm Wide Angle Adaptor | Fits Lee Foundation kit | Suitable for 77mm lenses

Excellent for copy stand lighting. | Corrects color balance for standard processing. | Allows photography indoor and outdoor on the same roll of film.

Size: 3x3" (7.62x7.62cm) | Filter Factor: Depends on film sensitivity | Effect: Filters out visible spectrum | Application: Infrared photography | Construction: Polyester

Lee Filters 95mm Lens Thread to Lee 100 Filter Holder Adaptor Ring

Lee Filters Coral Grad 4 Hard Graduated Coral Filter 4x6" Resin

Standard adaptor ring for lenses with 49 mm filter thread, For the LEE Filters system (100 mm), Aluminum thread, Compatible with 100 mm system | Filter system: 100mm system | Accesories types: Bague d'adaptation pour porte filtres | Diameter: 49 mm | Specific compatibility: Lens with standard thread

For simple storage of filters | Quick and easy access when on a shoot | Holds up to 10 filters.

Lee Filters Filter Wrap - Lee Filters Lifetime Warranty | Compatibility: SW150W 150x170mm Filters | Capacity: Three filters up to 150 x 170mm / 5.91 x 6.69" | Dimensions: Open: 7 x 18" / 17.78 x 45.72cmFolded: 7 x 6" / 17.78 x 15.24cm

Size: 21"x24" | paper like thickness

Lee 210

Photographs and commentary from: Joe Cornish - travel and landscape shooter and bestselling author | Photographs and commentary from: Mark Denton - panoramic shooter and bestselling author | Photographs and commentary from: Paul Gallagher - master black-and-white photographer, printer, lecturer, teacher and author | Photographs and commentary from: John Gravett - photographic director of Lakeland Photo Limited and photographic tutor | Photographs and commentary from: Plus: David Ward, David Noton, Tom Mackie, Jeremy Walker and Charlie Waite

Brand NEW Design - LEE100 Polarizer

Holds: Up to 3 Filters at a Time | Construction: Soft cloth

Lee Filters SW150 150x150mm Circular Polarizer Filter - SW150 Tin - Lee Filters Lifetime Limited Warranty | Filter Type: Circular Polarizer | Construction: Optical glass | Thickness: 0.1" / 0.25cm | Filter Factor: 2.8 to 4 (1.5 to 2 stops)

Allows you to mount the SW150 Mark II Holder on a 77mm diameter Lens!

Holds: One 150 x 150mm Filter | Dimensions: 6.5 x 6.5 x 0.8" / 16.51 x 16.51 x 2.03cm | Weight: 2.0oz / 56.70g

Adapter ring for wide angle lenses, Fits lenses with 49 mm filter threads, Allows you to use the LEE Filters system (100 mm), Once screwed, this wide angle adaptor ring sits closer to the front element of the lens, Reduce the risk of vignetting, Aluminium thread, Compatible with 100 mm system | Filter system: 100mm system | Accesories types: Bague d'adaptation pour porte-filtres | Diameter: 49 mm | Specific compatibility: Lens with standard thread

This protective lid can adaptor rings from the Lee 100 mm system. The lid meet the same purpose as ordinary lens cap. However, you will offer relating to the 100 mm system A significant advantage: There is no need to the adaptor rings from lenses remove before you know the lens scratches in its camera bag. This means that the time-consuming and off of the adaptor rings. | The cover are safe hung up. It cannot. And as well as ordinary lens cap to hold the lens caps the front lens of a lens from scratches, bumps, dirt and splashes of water. Each order includes three (3 protection cover included, you can make it a specific number of lenses with the lids for under £6. | The protection cover are made using an Opaken White Plastic. You can also be used for a manual white balance. Shoots you are taking a shot – without taking includes a protective cover is on the lens. Should be used then the picture for the white balance as a reference. | Material: Plastic (White),; Inside Diameter: 100 mm | Box contents: 3 CAP

The perfect introduction to the world of long-exposure photography. Contains a filter holder, an ND grad for the sky, and a Big and Little Stopper to stretch exposure times. All you need is an adaptor ring to get underway | The LEE100 Filter System combines all the best aspects of our previous holder with enhanced features that deliver a faster and more intuitive experience. Offering unparalleled creative freedom, the LEE100 filter system can be configured to hold up to four 100mm filters (our standard width) - and our wide selection of adaptor rings (sold separately) enable you to use this system with an enormous range of lenses | Our sturdy, lightweight, precision-engineered holder comes complete with three modular filter-guide blocks. Simply attach it to the appropriate size of adaptor ring for your lens, slide the filters into the slots on the filter-guide blocks, and you’re ready to start taking pictures | The Long Exposure kit includes: LEE100 Holder with Guide Blocks, The Big Stopper (and storage tin), The Little Stopper (and storage tin), 0.6 (2-stop) ND Hard Grad, Holder Pouch, Guide Block Pouch, and Filter Pouch | We know what it takes to produce precise, reliable, and repeatable results. Our continual investment in research and development allows us to embrace new technologies and adapt to the ever-changing needs of our customers. It’s our ability to meet these needs that has kept us at the forefront of filter manufacturing in the UK for half a century

Hard Plastic on the inside and Soft Silicone on the outside. | Built in viewing stand for hands-free comfort viewing | Edges are reinforced for more protection. | Surface covered by layer of silicone to provide better grip and protection. | 2 Tone coloring provides a more stylish look!

Vehicle GPS Antenna: 3 meters length, Fakra Z connector, receiving frequency 1575.42MHz, Gain 28 dB, active GPS antenna, amplifies the antenna signal, wider receiving range, more accurate navigation | Right Angle: Compared to other straight Fakra connector, this Fakra Z connector adopts 90-degree angle design, more convenient connection and better protection of wires | Fakra Z: Fakra Z type connector is a universal connector, compatible with Fakra C connector and other Fakra connector, plug it into the blue interface when you install it | NO NIV Fault: When some other GPS Navigation Antennas are installed, the car navigation system will always report NIV errors when it is turned on and running. We have found this problem and have resolved it | Work with: Ford, VW, Escape, Golf 5, Golf Plus, Passat, Expedition, Explorer, RNS2, RNS300 310 315, RNS500,RNS510 Stereo Head Unit, etc

Large screen ✓ The reflective screen measures 28cm x 19cm (TV studio size) and enables comfortable reading for the eyes. You can still read your text nicely from 5-6 meters. | Including Foot Remote Control ✓ Effortlessly adjust the speed of your scrolling script with the cutting-edge Foot Remote Control. Compatible with the bundled Leeventi Prompter Software. | Reliable Software ✓ With the in-house developed projection software voice-teleprompter and the remote control from Leeventi you get everything from one place. | Multi-device compatibility ✓ The teleprompter kit is compatible with any smartphones (including smartphone holders), tablets, photo cameras, video cameras and can be mounted on all types of tripods. | Special reflective glass ✓ The reflective glass of the Leeventi Teleprompter enables perfect contrast with full reflection of your script and at the same time keeps 100% of the brightness for your video recording.

Large screen ✓ The reflective screen measures 28cm x 19cm (TV studio size) and enables comfortable reading for the eyes. You can still read your text nicely from 5-6 meters. | Multi-device compatibility ✓ The teleprompter kit is compatible with any smartphones (including smartphone holders), tablets, photo cameras, video cameras and can be mounted on all types of tripods. | Reliable Software ✓ With the in-house developed projection software voice-teleprompter and the remote control from Leeventi you get everything from one place. | 8 years of experience ✓ With our many years of experience we were able to develop an affordable teleprompter, which delivers perfect video recording results. | Special reflective glass ✓ The reflective glass of the Leeventi Teleprompter enables perfect contrast with full reflection of your script and at the same time keeps 100% of the brightness for your video recording.

Perfectly match with the factory look and size.The blue coating on the screw prevent them from loosening and backing out.Just like the OEM screws | It requires 8pcs T5 M2.5X4 screws to secure the bottom base cover with palmrest | In this kit,there is a bonus tool,a Torx T5 screwdriver | Easily handle the tiny screws with the magnetic tip on the T5 Torx screwdriver | Screw Color:Silver

Package Content:12 pcs of screws | Only suit for 3.5" HDD , Do not suit for 2.5" HDD | Fit for Most HP machines

Diameter:0.575inch,or 14.61mm.Please check the the spot size of bottom base cover if you apply the feet to recess of cover.It's can be applied to any flat surface. | Color:Black | Material:Premium silicone | Adhesive backed is Japanese NITTO NO.5000 with better performance under the high working temperture and better adhesion | Install Tip:Please clean and dry the area where the silicone feet go to.The adhesion would reach the max value after 24 hours.Please use the computer and laptop after the silicone feet have installed for 24 hours.

Perfectly match with the factory look and size.The blue coating on the screw prevent them from loosening and backing out.Just like the OEM screws | It requires 8pcs(XPS 13) or 10pcs (XPS 15)M2x3 T5 screws to secure the bottom base cover with palmrest | In this kit,there is a bonus tool,a Torx T5 screwdriver | It also fit for all laptops which is secured by M2X3 T5 screws. | Easily handle the tiny screws with the magnetic tip on the T5 Torx screwdriver

Perfectly match with the factory look and size.The blue coating on the screw prevent them from loosening and backing out.Just like the OEM screws | It requires 8pcs(XPS 13) or 10pcs (XPS 15)M2x3 T5 screws to secure the bottom base cover with palmrest | In this kit,there is a bonus tool,a Torx T5 screwdriver | It also fit for all laptops which is secured by M2X3 T5 screws. | Easily handle the tiny screws with the magnetic tip on the T5 Torx screwdriver