Divider bass uses large inductance, high frequency porcelain resistance, metal capacitor. | HIFI level sound effects. The midrange inductance is a rectangular hollow core inductor. | High inductance inductors and high-quality metal film capacitors, self resetting fuse overcurrent protection. | Add a tin wire on the back of the divider so that large currents can pass through quickly and without loss. | Good sound grade and excellent workmanship, long service life. Can effectively reduce the calorific value.

Professional high and low frequency divider, greatly improve the sound effect of the speaker, reasonable layout, beautiful appearance, fine workmanship. | Large bass inductance + Non-polar capacitor + MPT metal capacitance + Treble protector. | The Large bass inductance of 66mm enables the low frequency signal to pass quickly, reduce the calorific value, show the frequency response, and make the low frequency more full. The 16mm professional frequency divider is adopted, and the effect is far better than the traditional 8-12mm. | 250V metal film capacitor, treble part uses WEAH250V4.7uF metal film capacitor with treble protection device. The large inductance is used at low frequency to make the low frequency fuller, the Non-polar capacitor 4.7uF filters out the high part of the low frequency to make the low frequency more pure and outstanding. | The input of frequency divider can be directly inserted into the wire clip, convenient to use. Compact size, easy to install.

Using overcurrent protection device, durable, firm and has a long service life. | The high-volume part adopts the famous German noninductive capacity 100V1.5uf in parallel, and the high power non-polar capacitor, the low frequency part is converted by inductance to achieve a clear and full effect. | The PCB bottom plate is made of fireproof board, which is clear and clean. The corners of the circuit are rounded, and the thick copper layer bears high current. | Use of polypropylene film divider special capacitance and high temperature resistance wire inductance coil, guarantees its large carrying power and long-term durability and very good sound quality. | Divider is a circuit within the speaker device, different bands (treble, bass) sound signal to distinguish, respectively, to the amplification, and then sent to the corresponding band of speakers and then replay.

Frequency division point: 2750/2800 switch adjustable. | Low pitched second order 12dB, high pitched third order 18dB for phase compensation, clean sound separation. | The wiring arrangement is scientific, with simulation and physical sound calibration, which can be matched with the vast majority of speakers. | Low pitched 1.0mm large wire diameter high temperature resistant copper clad aluminum inductor. Polypropylene audio frequency coupling high voltage capacitor for high tone capacitance. | The solderless terminal block is easy to install, making it a good choice for upgrading the assembly speaker to replace the ordinary frequency divider.

High quality screw terminals, durable & reliable, can be easy to install with your car / home audio, stay away from the hassle of welding. | Low pitched second order 12dB, high pitched third order 18dB for phase compensation, clean sound separation. Frequency division point: 2850 / 2900 switch adjustable. | The tweeter capacitor is a polypropylene audio coupling high voltage anti-interference capacitor, which makes the sound more rounded. The tweeter switching switch makes it better suited for tweeter sound pressure. | Dual protection: capacitor+self recovery fuse. So that the treble is well protected during high-power work and will not suddenly become silent due to high power. | By replacing or installing our speaker crossover, you can greatly improve the sound quality of your car or home audio system, allowing you to enjoy high-quality music.

High brightness coffee colored double diversion heat dissipating ABS plastic shell, beautiful and generous, bright colors, hight lever and quite prestigious. | Exquisite workmanship and very sophisticated materials. Overcurrent protection device. Two high frequency capacitors of 100V15uf are used in parallel for high frequency parts. High frequency capacitors. Great sound Enhancement Tool. | Generally, the frequency divider uses 8-12mm stepless capacitors.In this case, two 16mm professional frequency divider capacitors are used. | Bass inductor + polymer magnet, enhance the sag of the bass. | Six position solderless plug in socket. Easy to use: plug in the corresponding wiring, and then tighten the gong wire immediately.

To separate the mixed audio signal into a treble, bass, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound purposes. | Make the treble clear and increase the intensity of the bass, freely enjoy clear and natural music. | Wire wound ceramic resistor and metal film capacitors, ensure its large load power, long-term durability, never burnout. | Treble and bass frequency dividing, widely used for high end speakers, bookshelf speakers, etc. | Circuit board design with precise cut outs and lines, free for welding, very suitable for DIY.

Using overcurrent protection device, durable, firm and has a long service life. | The PCB bottom plate is made of fire-resistant sheet, which is clear and clean. The corners of the line are rounded, and the thick copper layer withstands large currents. | Capacitance is the key to divider performance. Treble uses the famous German non-inductive 100V1.5U two capacitors in parallel, overcurrent protection, etc., to ensure its super load capacity and long-term durability and nice sound. | In a speaker system, people call the cabinet, crossover circuit, and speaker unit the three major parts of the speaker system, and the crossover circuit plays an extremely important role in whether the speaker system can restore the electroacoustic signal with high value. | Adequate materials, full power, beautiful appearance and fine workmanship. The use of polypropylene film frequency divider special capacitors and high temperature line inductance coils, to ensure its super load capacity and long-term durability and good sound.

Fine workmanship and sophisticated materials. The design is reasonable, the appearance is exquisite, and the sound is a sharp weapon. | The high-frequency part uses the famous German EPCOS thousand layer cake film non-inductive capacitor, 100V1.5uf in parallel, make more efforts to achieve the purpose of high current and zero loss angle, with very few errors -3% to +3%. | The low-frequency part passes through the inductor to the output port to achieve a clear and full effect. Listening to large-scale symphony and passion style music is quite enjoyable. | The transparency of the sound is extremely high, very open, clear, rigorous and neat, the transient speed is very high, and the details of the sound are displayed like the actors on the stage that look bright and bright. | If you want your audio details to be outstanding, the layering is more distinct and prominent; choosing it is equivalent to choosing a surprise.

To separate the mixed audio signal into a treble, alto, bass, and then were sent to the corresponding treble, alto,bass speaker unit in playback, resulting in enhance the sound purposes. | Make the treble clear, enrich the alto effect, and increase the intensity of the bass, freely enjoy clear and natural music. | Wire wound ceramic resistor and metal film capacitors, ensure its large load power, long-term durability, never burnout. | Treble, alto and bass frequency dividing, widely used for 8-12inches speakers. | Circuit board design with precise cut outs and lines, free for welding, very suitable for DIY.

Divider bass uses large inductance, high frequency porcelain resistance, metal capacitor. | MKP audio enthusiast audio special capacitors, low loss. | 12-position solder free terminals, easy to use, can be used immediately after inserting the corresponding connection and tightening the screws. | Double tie reinforcement to prevent music resonance, 58mm large bass inductor to meet the needs of audio enthusiast. | Crossover point 2200-2600Hz, 150W power, the maximum withstand power ceiling of 300W, very suitable for DIY.

【5-Way Speaker Audio Crossover Filters】250W two treble, two midrange, one bass 5 way frequency divider, solderless wiring, high and medium tone protection, non-destructive acoustic fidelity. | 【Heat Dissipation Design】Our product shell is made of high transparency coffee colored ABS material, adopting a dual flow and heat dissipation design, which is more beautiful, better heat dissipation, and longer service life | 【Excellent Components】Audio specific capacitor, fever grade inductor, self recovery fuse. Can achieve more accurate and stable audio frequency division, bringing lossless high fidelity acoustic fidelity.Optimize acoustic fidelity while maintaining circuit stability and improving the performance of the frequency divider. | 【Convenient Installation】High quality Screw Terminals, sturdy & reliable, small size body can be easy to install with your car audio, stay away from the hassle of welding. | 【Application】The crossover is suitable for triple + midrange + bass speakers. The speaker is suitable for 4 - 8 ohms. The finished products are also mainly used for better coordination.

Using high temperature blue skeleton, large inductance with a wire diameter of 1.57mm, solderless socket, anti-interference/high voltage/MPP audio specific capacitor and other components. | Fever grade pure midrange frequency divider, adjustable acoustic fidelity, warm and smooth human voice. | The anti-interference and high voltage resistant MPP audio capacitor optimizes acoustic fidelity while maintaining circuit stability and improving divider performance. | Midrange high current switch, adjustable acoustic fidelity for three levels at any time, choose your own suitable acoustic fidelity. | Suitable for high-power midrange speakers ranging from 8 inches to 24 inches.