ELEGANT: Dark brown premium synthetic leather provides an elegant, professional look and feel. 2 mm thick padding provides enough protection from bumps, scratches and dust without adding a lot of bulk | COMPATIBILITY: Designed only for the naked iPad Pro 11 (2018 and 2020 versions) as well as the naked 2020 iPad Air (iPad Air 4). It will be too tight if you have any other cases on your tablet. IMP

Dark brown premium synthetic leather provides an elegant, professional look and feel. 2 mm thick padding provides enough protection from bumps, scratches and dust without adding a lot of bulk | Designed only for the naked 2015 and 2017 iPad Pro 12.9, screen protectors are OK (It will be too tight if you have any other cases on your tablet). Will not be a snug fit on the 2018 iPad Pro 12.9. May fit other similarly sized devices – see dimensions of iPad below to compare. | Easy slide in and out; not too tight, not too loose; Lined with soft microfiber felt that prevents dust build up and helps clean the screen as you slide your device in and out | Simplicity by design: Clean, smooth finish without any clasps, buckles, bands, or other annoying protrusions that get in the way or break | How it works: The device is held in place by friction. If you enjoy using your device without a traditional case but still want to protect it while not in use - or if you remove it from its case often, this is the perfect choice for you: An elegant alternative to traditional cases. It’s simple, easy to use, and maintains the slim lines and natural aesthetic of your device

For iPhone XS Max: Premium canvas style synthetic leather provides an elegant and professional look and the UltraGrip twill style texture provides a secure feel in your hands. Still slim at only 14 mm thick with 2 cards inserted. | 2 CARD SLOTS: 2 separate slots for carrying your 2 most important cards, allowing you to go wallet-less when necessary or convenient; Carry your ID and favorite credit card so you have the essentials for most situations. Note that we do not recommend more than 1 card per slot for proper performance. | MAGNETIC MOUNTING: Integrated metal plate provides seamless magnetic mounting while not interfering with wireless charging or your cards. Designed to work specifically with Dockem's Magno Mount v3 series car mounts but can be used with any magnetic mount. However, use with other mounts may result in sub-par performance. The location of the metal plate requires strong magnets and perfect alignment for the best results. | WIRELESS CHARGING COMPATIBLE (Qi Charging): The metal plate in this case is placed at the top of the device, so that it does not interfere with wireless charging. There are no other materials that would interfere with wireless charging but the case does add 2-3mm distance between your phone and the charger, so please check your charging base specs to ensure compatibility with this range. IMPORTANT NOTE: We recommend removing any cards prior to charging for the best results | SIMPLICITY BY DESIGN: Easy snap-on shell installation, precise cutouts for easy access to all ports as well as physical buttons for easy operation. IMPORTANT: To install, push phone into the top of the case first, then press the rest of the phone in, snapping in the bottom and sides.

Installs easily into drywall with included screws and anchors; a hammer and Philips head screwdriver are the only required tools for most scenarios (drill and/or alternative screws may be needed for studs or walls other than drywall) | Universal Design provides compatibility with all devices up to 11mm thick. Built-in cord clips make for an easy charging station. Perfect in the kitchen, gym, bedroom or anywhere you need | Super easy docking and undocking, can be set up in portrait or landscape. No extra accessories required; no special cases or attachments onto your tablet | Built-in cord clips and, on larger model iPads, full access to every button and port while mounted (smaller devices may have covered ports in landscape mode) | Apple Smart Covers tuck neatly behind without the need to remove them; also compatible with some slimmer tablet & case combinations (any device/case combo less than 11mm thick in total)

DAMAGE-FREE SETUP & REMOVAL: Installs in less than 2 minutes using damage-free 3M Command Adhesive Strips (included) that are rated to hold up to 5lbs (2.25 kg) each; no screws or holes required; intended for use on smooth, flat surfaces (Screw-in versions sold separately; Koala Mount & Koala Mount 2.0). | UNIVERSAL: Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. This includes the iPad 1, 2, 3, 4, New iPad 9.7, Pro, Air, Air 2, Most Samsung Tablets, and many more. The brackets will fit any device 11mm thick or less. Can be used with protective cases left on if total thickness is under 11 mm). | NOTE ON COMPATIBILITY: While it does fit most popular tablets, the bracket supports can block ports/buttons on either side between 1.5 - 3.75 inches up from the bottom (7-8" tablets, like the iPad Mini may have blocked ports in landscape mode - see our Koala Mount 2.0 if this may be an issue). | SIMPLE: Super easy docking and undocking, can be set up in portrait or landscape mode. No extra accessories required; no special cases or attachments onto your tablet. Full access to ports/buttons on larger devices 7-8" devices may be better with our Koala Mount 2.0. Built-in cord clips to help keep track of your cord. | MOUNTING: These come with Regular 3M Command strips that are not designed to work in areas exposed to high heats or moisture (like the bathroom). 3M makes special water and heat resistant strips for this. Also, all Command Strips don't tend to work well on textured surfaces and some wallpapers. We strongly recommend performing our Strength Test. Command Strips are not reusable once they've been removed.

For iPhone SE 2020 (gen 2), 8, 7, 6S, & 6 only; Dark brown premium synthetic leather provides an elegant, professional look and feel. Ultra-thin leather adds very little thickness to your phone (material is approx 1mm thick) providing only protection from scratches and dust without adding a lot of bulk | Easy slide in and out; not too tight, not too loose; Lined with soft microfiber felt that prevents dust build up and helps clean the screen as you slide the phone in and out. Simplicity by design: Clean, smooth finish without any clasps, buckles, bands, or other annoying protrusions that get in the way or break | Designed only for use with the naked phones listed above, screen protectors are OK (it will be too tight if you have any other cases on your phone) | How it works: The phone is held in place by friction. If you enjoy using your phone without a traditional case but still want to protect it while not in use - or if you remove your iPhone from its case often, this is the perfect choice for you: An elegant alternative to traditional cases. It’s simple, easy to use, and maintains the slim lines and natural aesthetic of your phone | Please Note: If you are looking for a case that will provide drop protection, this is not the sleeve for you. The material is ultra-thin and very flexible. The top is left open, and the material is not thick enough to provide significant protection against drops. It is solely meant to protect from scratches and dust, perfect for sliding into a pocket or bag. Also note that the material is synthetic (faux leather). If you are looking for real, genuine leather, this is not the product for you

DAMAGE-FREE SETUP & REMOVAL: Installs in less than 2 minutes using damage-free 3M Command Adhesive Strips (included) that are rated to hold up to 5lbs (2.25 kg) each; no screws or holes required; intended for use on smooth, flat surfaces (Screw-in versions sold separately; Koala Mount & Koala Mount 2.0). | UNIVERSAL: Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. This includes the iPad 1, 2, 3, 4, New iPad 9.7, Pro, Air, Air 2, Most Samsung Tablets, and many more. The brackets will fit any device 11mm thick or less. Can be used with protective cases left on if total thickness is under 11 mm). | NOTE ON COMPATIBILITY: While it does fit most popular tablets, the bracket supports can block ports/buttons on either side between 1.5 - 3.75 inches up from the bottom (7-8" tablets, like the iPad Mini may have blocked ports in landscape mode - see our Koala Mount 2.0 if this may be an issue). | SIMPLE: Super easy docking and undocking, can be set up in portrait or landscape mode. No extra accessories required; no special cases or attachments onto your tablet. Full access to ports/buttons on larger devices 7-8" devices may be better with our Koala Mount 2.0. Built-in cord clips to help keep track of your cord. | MOUNTING: These come with Regular 3M Command strips that are not designed to work in areas exposed to high heats or moisture (like the bathroom). 3M makes special water and heat resistant strips for this. Also, all Command Strips don't tend to work well on textured surfaces and some wallpapers. We strongly recommend performing our Strength Test. Command Strips are not reusable once they've been removed.

WIDE RANGE OF COMPATIBILITY: Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. The brackets will fit any device with a thickness between 14 mm and 22 mm (or 9/16" and just short of 7/8"). Some thicker devices/cases may also fit if they have tapered edges. Many devices can be used with protective cases left on (if total thickness is under 22mm) | 2 SETUP OPTIONS WITH INCLUDED PARTS; Incredibly simple, damage-free setup with 3M Command Adhesive strips rated to hold up to 5 lbs each. Alternatively, setup with included screws and anchors for scenarios where a more heavy duty setup is required | ACCESSIBLE PORTS: The Koala Mount 2XL was specifically designed to leave as much space open as possible on the sides and bottom of the device so that ports will still be as accessible as possible on a wide range of devices, however, please check the dimensions in the photos and compare to your specific device to determine suitability | BUILT-IN CORD CLIPS: There are 2 different styles of cord clip integrated into each bracket. The side clip is a temporary clip that is super easy to use and is meant for holding your cord while the mount is not in use. The bottom clip is a semi-permanent clip designed to hold your cord at all times | PERFECT FOR BEDSIDE AND HEADBOARD: The Koala Mount 2XL is perfect for using to charge your phone safely in the bedroom without taking up valuable nightstand space. Attach it to the side of a nightstand, directly to the headboard, or to the wall, for a convenient charging spot, clock, and alarm.