✅[Use]: Computer screw kit motherboard screws are used to install M.2 SSD on the computer motherboard. Fit for Asus, for Gigabyte, for MSI. | ✅[Strong Compatibility]: Supports NGFF PCIe NVMe M.2 SSD , perfectly fit for Samsung 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970PRO, etc | ✅[Hex Nuts]: Nuts of different heights can meet your different needs. | ✅[Widely Use]: Perfect for laptop notebook M.2 NVME, applied in electronics, personal computers, PC board, DIY, etc. | ✅[Package Content]: 9 pcs M2 screws; 6 pcs M3 screws; 15 pcs nuts of different heights; 6 pcs washer; 1 pcs screwdriver.

【Switch】: An SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low when the switch is pressed. | 【Parameters】: Working voltage: 2.5~5.25V; PCB Size: 22*28mm | 【Trackball】: The four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball. | 【Fact note】: A slight roll of the trackball creates multiple high/low transitions on the four axis pins, easily picked up by any microcontroller essentially giving you the option of adding a mouse to your project. | 【Item Condition】: The module is 100% made of original electronic components, and the product is a brand new product, you can buy it with confidence

●[Connector]: Internal computer power adapter, used to supply power from the 8-pin ATX on the motherboard. The 24-pin ATX connector is converted to the required 8-pin ATX connector. | ●[Solution]: Power Cable can convert the regular 24-pin power supply into 8-pin power supply interface for Dell dedicated. | ●[Converter]: The converter line comes with a 12VSB booster panel, which boosts the +5VSB of the conventional power supply to the +12VSB required. | ●[Compatibility]: Compatible with 3020, 7020, 9020, H61, H81, Q77, Q87, B75, A75, Q75, Q65. | ●[About cable]: Adopt 18AWG standard wire, 0.18x34 copper core, support 1000W power supply.

[Converter]: 2 x DB25 Male to DB25 Male; 2 x DB25 Female to DB25 Female; 2 x DB25 Male to DB25 Female. | [Solution]: Solve the problem that the connector of the DB25 cable does not match the interface of the device. No need to buy an additional DB25 cable, no matter whether your DB25 cable is female or male, DB25 gender converter can solve your problem. | [Shield interference]: Each changer is molded and fully shielded, preventing any unwanted EMI/RFI interference caused from office equipment. | [Widely Used]: Widely used in two rows of 25-pin communication devices, such as PLC controllers, touch screens, programmers, data converters, etc. | [Note]: DB25 Male to Female connector has no gender conversion function, but it can convert a screwless DB25 connector to a screwed DB25 connector, which can make the DB25 cable connection more stable.

【Usage】: NVME SSD Conversion Adapter is a DIY kit for assembling an upgraded SSD replacement for MacBook with high capacity NVME SSD. | 【Version Compatible】: Requires macOS 10.13 High Sierra or later; not compatible with versions before macOS 10.13. Please use the original SSD to upgrade macOS before installation. | 【Capacity upgrade】: You can upgrade the storage capacity of your MACbook through this NVME SSD conversion adapter, very suitable for DIY enthusiasts, high-end gamers, 4K and 3D content designers. | 【Wide Application】: Support M.2 NVME/AHCI SSD such as for Samsung 960 EVO, for Samsung 970 for EVO/PRO, for WD Black, for Crucial P1, for HP EX920, for ADATA SX8200, for Intel 600p series NVME SSD, etc. | 【Compatibility】: Compatible with MacBook Air 11” A1465 and MacBook Air 13” A1466 (Mid 2013-Mid 2017), MacBook Pro (Retina) 13" A1502 and 15" A1398 (Late 2013-Mid 2015), Mac Pro ME253 MD878. | 【High Quality】: The NVME SSD conversion adapter is made of high quality material, safe and durable, stable transmission and long service life. | 【Package Content】: 1 x M.2 NVME SSD Convert Adapter Card, 1 x T0.8 Screwdriver, 1 x T1.2 Screwdriver.

【About Cable】: Mini sas 36 sff-8087 to sff-8482 sas forward breakout, internal mini sas 36 pin sff-8087 sas connector male to sas raid controller or motherboard, 4x sas 29 pin sff-8483 connector with SATA power, each connector connects to backplane or 4 hard drives sas 29-pin SFF8482 adapter contains SATA 7-pin data and data 15-pin power adapter. | 【6Gbs Data Transfer】: Mini sas to 4 sas/ sff-8087 host to sff-8482 target, sas 8087 host to sas hba or PCIe controller, mini sas 36 pin sff-8087 to 4 sff-8482 connectors, in serial scsi control drives and SATA disks, need to connect SATA power cable for each SAS to SATA adapter connector, SAS 8087 8482 cable data transfer rate up to 6Gbs per drive. | 【Material】: SFF-8087 sas breakout cable is designed with sas cable and braided tape, length options mini sas to sas, easy to route after the cable is installed, mini SAS to SAS 8087 breakout cable is perfect for professionals and DIY gamers. | 【Note】: sff-8087 to 4 sff-8482 cable do Not work with SAS Driver, Donot connecter SFF-8087 on your backplane, otherwise the mini sas to sas breakout will not work with them. | 【Simplified management】: 8087 breakout cable with power supply, 8087 male SAS connector for expanded storage usage, labeled SAS to SAS cable, simplifies cable management game, mini sas sff-8087 sff-8482 data transfer cable to easily link serial scsi controllers and sas/sata connector. | 【Controller to SATA Disks】: Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482) | 【Product Includes】: 1 x Mini SAS to SAS Cable, 1 x SATA Power Splitter Cable.

Adapter Function: When your computer does not have many USB ports, a USB to PS/2 adapter can help you easily connect to the computer. | Application: The USB interface is only used to connect a computer mouse or keyboard, and cannot be connected to other devices. The product is of good quality and can be easily installed without a software driver. | Use Matters: Since the PS/2 to USB adapter does not support hot-plugging, please turn off the computer power first! Then connect the PS/2 to USB adapter. After the connection is successful, turn on the computer power. If the middle mouse button is not sensitive, please turn off the computer first and then turn it on again. | Please Note: Please check whether your mouse or keyboard has a chip before purchasing, if not, this adapter may not be compatible with your device. There are many kinds of USB interface devices. | Package Content: 4 pcs PS2 male to USB A female adapter.

【USB 3.1 Type-C to VGA Cable】: This USB to VGA cable can transfer your phone to TV/monitor, support video resolution up to 4K@30Hz. The perfect solution for travel and presentations. | 【Plug and Play】: This USB-C to DVI cable requires no adapters or drivers. This USB-C to DVI cable is easy to use with a simple installation. Our cables are 4 feet long, plenty of length so you can place your device exactly where you need it. (Note: The USB-C port must be full needle) | 【High Quality Cable】: The high-quality PVC and copper core materials used in this USB C to DVI cable have excellent performance and greatly extend the life of the cable, this Type C to DVI cable highlights the quality and value for money. | 【Anti-slip Design】: Our Type C to DVI cable has extra durability and user-friendly anti-slip design for easier plugging and unplugging, more convenient to use. | 【Compatibility】: USB-C port compatible with for MacBook, for MacBook Air, for MacBook Pro, for iMac, for iMac Pro, for iPad Pro, for Acer Aspire Switch, for Predator 15/17/17X, for Chromebook Flip C302, for Chromebook R13, for Pixelbook 2, for Pixel Slate Tablet, for ASUS ROG GL/G5/G 7/GX/Strix, for ZenBook Pro UX501 VW, for Transformer 3 Pro, for Surface Book 2, for Gigabyte Aorus X5 15, X7 DT 17, for BRIX/for BRIX S, for Razer Blade/Stealth/Pro, for Samsung Notebook Odyssey, Notebook 9 15in.