CY PCI-Express 4.0 Mini SAS SFF-8087 to SAS HD SFF-8643 PCBA Female Adapter With Bracket | The Adapter with Full and Low Profile PCI Slot Profile Mounting Bracket | The Adapter External will work both on the host and device side. it is reversible design. | The adapter support SAS to SAS or PCI-E to PCI-E singal. | Supports up to 12Gb/s Mini SAS or PCI-E 4.0 Data Transfer Rate.

This convertor expands the 2230 M-Key system by one SFF-8612 oculink interface. | It can be connected e.g. one SSD or eGPU Graphics Card by using an optional cable. | The card transmits PCI Express 4.0 signals using the NVMe protocol.Data transfer rate up to 64Gbps, Supports NVM Express (NVMe) 1.2. | Connectors: 1 x OCuLink SFF-8612 female and 1 x 67 pin M.2 Key M male. | The angled type vertical connector Allowing you to connect it to a female port, even if space around the port is limited.

The card transmits PCI Express signals using the NVMe protocol. | Data transfer rate up to 64 Gbps,Supports NVM Express (NVMe) 1.2 | This adapter enables the connection of a NVMe memory e.g. U.2 SSD via the SFF-8612 interface to a M.2 slot. | Form factor: M.2 2260,Suitable for M.2 slot with key M based on PCIe | CY Adapter PCI-E 4.0 M.2 M-key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD 2260

The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives. | The SFF-8482 is a 29-pin connector with a plastic body, and configured with 4pins/15pins that support the power requirements of the drive, and (2) groups of 7 pins that carry the SAS data signals. | enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD. | Hard Disk Fanout Raid cableHost: SFF-8087 connector | Target: 4xSFF-8482 SAS connectorWith 4pin/15pin power connector

This OCuLink cable can be used to connect internal devices, e.g. a backplane with SFF-8611 connector to a controller with OCuLink SFF-8611 connector. | OCuLink SFF-8611 male to SFF-8611 male,Lock to Mating Part: With Active Latch | System requirements:A free OCuLink interface | Data transfer rate up to 64 Gbps,Supports PCI Express 4.0 | CY Cable OcuLink PCIe PCI-Express SFF-8611 4i to OcuLink SFF-8611 SSD Data Active Cable 50cm

CFexpress Type-B Memory Card CFE CFB Adapter Compatible with Camera 8K RAW PCIe Expansion. | Build-in NVMe PCIe Gen3x2 SSD inside.Memory Size: See Tittle (Windows Output Binary will be smaller than this), Bus Interface: NVMe PCIe Gen3x2, Form Factor CFexpress Type B. | Read write speeds of up to 500-1500MB/s, offer low latency during high-speed recording and enhance workflow, Performance may be lower depending upon host device, usage conditions, and other factors. | Designed for next-gen video/photo cameras such as DSLR, cinema, and mirrorless cameras,Enables smooth, RAW 4K/8K video support. Captures flawless RAW videos and photos in breathtaking 8K Ultra HD resolution. | CFexpress type b card is shockproof, anti-magnetic, moisture proof, X-ray proof, cold and heat resistant, tough and durable, resistant to bending, and able to withstand extreme environments.

There is no SSD or capacity inside,You need to put in the 2230mm SSD yourself, Bus Interface: NVMe PCIe Gen3x2, Form Factor CFexpress Type B. | The 2230 SSD thickness must be less than 2.2mm, otherwise it cannot be put in. | Read write speeds of up to 1000-2000MB/s, offer low latency during high-speed recording and enhance workflow, Performance may be lower depending upon ssd,host device, usage conditions, and other factors. | Designed for next-gen video/photo cameras such as DSLR, cinema, and mirrorless cameras,Enables smooth, RAW 4K/8K video support. Captures flawless RAW videos and photos in breathtaking 8K Ultra HD resolution. | CFexpress type b card is shockproof, anti-magnetic, moisture proof, X-ray proof, cold and heat resistant, tough and durable, resistant to bending, and able to withstand extreme environments.