This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home.
Bulb model: ELP-LP96//V13H010L96
Working hours :4000 hours
Warranty period :200 days
Bulb type: Projector Lamp Bulb with housing
Applicable model:For epson ELP-LP96 powerlite home cinema 2100 2150 1060 660 760hd vs250 vs350 vs355 ex9210 ex9220 ex3260 ex5260 ex7260 eh-tw650 eh-tw610 eh-tw5650 eh-tw5600 eh-tw5400 x39 s39 w39 107 108 109w 1266 1286 2042 2142w 2247u 970 980w 990u, eb-108 eb-2042 eb-2142W eb-2247U eb-960W eb-970 eb-980W eb-990U eb-S05 eb-S39 eb-S41 eb-U05 eb-U42 eb-W05 eb-W39 eb-W42 eb-X05 eb-X39 eb-X41

When to change projector bulbs:

When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb.

How to replace projector bulbs:
1. Turn off the projector and unplug the power cord
2. Let the projector cool for at least an hour. The bulb is very hot after use
3. Use a screwdriver to remove the screws from the lid and slide the lampshade open
Loosen the two screws holding the bulb in place
5. Hold the bulb and pull it out straight
6. Use the opposite steps to place the new bulb back in the projector and tighten the screws
7. Reinstall the lampshade and reset the life of the bulb
8. Installation is complete

Note:
1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us
2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb