Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC. | The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables. | Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. | A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height). | Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.

Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC. | The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables. | Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. | A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height). | Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.

Designed for high-performance overclocking | Designed for great looks. Format: Unbuffered DIMM. Pin Out: 288 Pin. | Performance and compatibility | Low-profile heat spreader design | Compatible with intel 100 series, intel 200 series, intel 300 series, intel x299, amd 300 series and amd 400 series

Pin Out: 204 Pin | Voltage: 1.5V | Compatible with MacBook Pro (13-inch, Mid 2009), MacBook Pro (13-inch, Mid 2010), MacBook Pro (15-inch, Mid 2010), MacBook Pro (15-inch, 2.53GHz, Mid 2009), MacBook Pro (15-inch, Mid 2009), MacBook Pro (17-inch, Mid 2010), MacBook Pro (17-inch, Mid 2009), MacBook Pro (17-inch, Early 2009) | No Fan Included | Memory Type: DDR3; Speed: 1066MHz | Density: 8GB (2x4GB SO-DIMM) | Speed: 1066MHz CL7 | Timing: 7-7-7-20 (1066MHz) | Type: DDR3 | Format: SO-DIMM

1333 MHz performance Latency of 9-9-9-24 to maximize system performance | 100% Guaranteed compatibility with all Intel and AMD DDR3 platforms | DDR3 DIMM for Intel and AMD platforms for system builds and upgrades | Backed by Corsair's Lifetime Warranty and excellent customer support | Memory Type: DDR3; Speed: 1333MHz

80 PLUS Bronze certified: High efficiency operation for less excess heat and lower operating costs | Thermally controlled Fan: Silent operation at low and medium loads; MTBF hours: 100,000 hours | Semi modular: Make your builds and upgrades easy, with clean, great looking results | Five year warranty: Your guarantee of reliable operation that will last across several system builds | Continuous output rated temperature is 40 degree Celsius. Fan size-4.7 inch

Builder Series cx, 750 Watt, modular power supply, NA version | Design that delivers high availability, scalability, and for maximum flexibility and price/performance | Made in China | Modular cabling system lets you use only the cables you need | Built and tested to strict standards for trouble-free installation and smooth operation; Fan size millimeter: 135 millimeter | 80 Plus Bronze certified efficiency for low noise and lower power bills | Up to 85% energy efficiency means less heat generation | 0.99 Active Power Factor Correction provides clean and reliable power | Universal AC input from 90-264V | A dedicated single +12V rail offers maximum compatibility with the latest components | A three year warranty and lifetime access to Corsair’s legendary technical support and customer service

80 PLUS Bronze certified efficiency provides up to 88% operational efficiency, generating less heat and lowering your energy costs. | Control RGB lighting at the push of a button, with ten preset lighting modes for eight individually addressable RGB LEDs built into a 120mm RGB fan. | Connect to a CORSAIR iCUE RGB Lighting Controller (sold separately) or motherboard via the included 5V ARGB adapter for advanced RGB lighting control. | A dedicated optimized fan curve is specially calculated to keep noise levels down. | Supports Microsoft Modern Standby sleep mode for extremely fast wake-from-sleep times and better low-load efficiency.

Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay | Adapts 3.5" internal drive bay for use with up to two 2.5" SSDs | Supports 7mm and 9.5mm height standard SSDs | Adjustable mounting holes for symmetrical and asymmetrical dual SSD mounting | Enough clearance for connecting SATA cables without strain to SATA connector | Includes 2 sets of SSD mounting screws and 1 set of adapter mounting screws | Easy, hassle-free and clean installation. Compatible with all Corsair SSDs, as well as all other brands

Hard-anodized, aircraft-grade aluminum housing | EPDM water seal | Molded shock damping collar | High performance USB 3.0 | Limited 5 years warranty

Compatible devices: Support for Microsoft Windows, Mac OS X and Linux, with no driver or software installation necessary

A high-performance Xylem D5 PWM pump controlled via PWM to deliver the perfect flow balance for your loop. | Ten individually addressable top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting. Add a CORSAIR iCUE Controller (sold separately) and powerful CORSAIR iCUE software to customize and sync RGB lighting across all your iCUE-compatible products including water blocks, fans, keyboard, and more. | The integrated 330ml reservoir with an anti-vortex insert puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing, and topping-off coolant easy. | Included temperature sensor provides real-time coolant temperatures from inside your cooling loop when connected to a CORSAIR iCUE COMMANDER PRO or COMMANDER CORE (sold separately). | Rubberized mounting system reduces pump vibrations and noise, so your custom cooling loop is seen, not heard.

Standard G1/4" Bspp threads provide universal compatibility with all Corsair XF fittings. | Machined from solid brass for superior quality and durability. | High-quality polished finish for a flawless look. | Use the xf ball Valve to seal off sections of your custom cooling System from coolant flow or easily drain your loop.

Dual 140mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build. | 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans. | A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR's performance copper water blocks. | High-quality matte Black polyurethane coating delivers a flawless finish to match your system. | Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.

Dual 140mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build. | 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans. | A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR's performance copper water blocks. | High-quality matte Black polyurethane coating delivers a flawless finish to match your system. | Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.

Dual 120mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build. | 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans. | A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR's performance copper water blocks. | High-quality matte Black polyurethane coating delivers a flawless finish to match your system. | Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.

High quality, straight-line tubing for perfect tubing runs. | Crystal-clear PMMA tubing puts your coolant on display. | Resilient Construction that won't warp or deform under high pressure or high coolant temperatures. | Easy to cut to an ideal length for your custom cooling System using a fine-toothed hacksaw (not included).

Dual 120mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build. | 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans. | A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR's performance copper water blocks. | High-quality matte Black polyurethane coating delivers a flawless finish to match your system. | Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.

A high-performance RGB pump head provides powerful, low-noise cooling for your CPU, lit by 33 ultra-bright CAPELLIX RGB LEDs. | Includes a CORSAIR iCUE Commander CORE Smart RGB Lighting and Fan Speed Controller, for precise speed and lighting control over up to six RGB fans. | Two 120mm CORSAIR ML RGB Magnetic Levitation PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan. | Accurately control your cooling via PWM, adjusting fan speeds from 400 to 2,400 RPM. | Zero RPM fan profiles in CORSAIR iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise. | Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1200, 1366, 2011, 2011-3, 2066 and AMD AM2, AM3, AM4, FM1, FM2, sTR4, sTRX4

A high-performance RGB pump head provides powerful, low-noise cooling for your CPU, lit by 33 ultra-bright CAPELLIX RGB LEDs. | Includes a CORSAIR iCUE Commander CORE Smart RGB Lighting and Fan Speed Controller, for precise speed and lighting control over up to six RGB fans. | Two 140mm CORSAIR ML RGB Magnetic Levitation PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan. | Accurately control your cooling via PWM, adjusting fan speeds from 400 to 2,000 RPM. | Zero RPM fan profiles in CORSAIR iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise.

A high-performance RGB pump head provides powerful, low-noise cooling for your CPU, lit by 33 ultra-bright CAPELLIX RGB LEDs. | Includes a CORSAIR iCUE Commander CORE Smart RGB Lighting and Fan Speed Controller, for precise speed and lighting control over up to six RGB fans. | Three 120mm CORSAIR ML RGB Magnetic Levitation PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan. | Accurately control your cooling via PWM, adjusting fan speeds from 400 to 2,400 RPM. | A brilliant white finish on the pump cap, radiator, and fan housing reflects light for brighter lighting and fits right in with a modern white RGB build. | Zero RPM fan profiles in CORSAIR iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise. | CORSAIR iCUE software allows you to adjust fan and pump speeds, control and synchronize your cooler’s RGB lighting with all iCUE-compatible devices, and monitor CPU and coolant temperatures, all from a single intuitive interface. | A split-flow copper cold plate and high-density stack of 128 micro-skived fins-per-inch provide highly efficient cooling at all loads. | A centrifugal pump delivers a flow rate of up to 0.82L/min while generating less than 20 dBA, for extreme cooling with low noise. | Equipped with a 360mm radiator with a high surface area for powerful cooling.

Vivid RGB backlighting offers virtually unlimited lighting customization, or use a variety of on board pre-installed effects for instant illumination | Dust and spill resistant design rated up to IP32 protection, helps defend against accidents so your gameplay never has to stop | 100 percentage gold contact Cherry MX mechanical gaming key switches deliver the ultimate performance and competitive advantage | Corsair Utility Engine (CUE) software controls sophisticated macro programming and stunning dynamic lighting effects | 100 percentage Anti ghosting with full key rollover ensures your commands and simultaneous keystrokes always register the way you intended

16 independent RGB LEDs in every fan, split between two separate light loops. Air flow - 43.25 CFM. Noise level - 24.8 decibels | Software control and customize RGB lighting effects with the included Corsair lighting Node Pro or expand your RGB lighting with more Corsair RGB fans or RGB LED lighting strips (sold separately) | PWM fan control allows for dynamic speed adjustment between 600 rpm to 1, 500 rpm, minimizing noise or maximizing airflow | 120 millimeter fan Blade engineered for Low-Noise operation without sacrificing performance | Bearing Type: Hydraulic

Superior control: Textile-weave surface designed for pixel-precise targeting and low friction tracking | Accurate + Precise: Optimized for both laser and optical gaming mice | Non-slip: Non-slip rubber base ensures secure placement | Comfortable: 320mm x 270mm x 3mm surface area

Superior control: Textile weave surface designed for pixel precise targeting and low friction tracking | No fray, No fuss: Surrounded stitched edges guard against surface peeling for maximum durability | Accurate + Precise: Optimized for both laser and optical gaming mice | Zero slip: Anti-skid rubber base helps it stay securely in place

Spill-Proof, Stain-Resistant Coating: Liquids slide right off the surface so your mouse pad is easy to wipe clean even after an accident. | Micro-Weave Fabric: Creates a dense surface for a faster and smoother glide for your mouse. | Massive Size: A huge 930mm x 400mm (36.6” x 15.7”) surface provides ample room for your gaming mouse, keyboard, and more. | 4mm-Thick Plush Rubber Construction: Provides the comfort to play for hours. | Durable Stitched Anti-Fray Edges: 360° of stitching guards against surface peeling. | Staying Power: An anti-skid textured rubber base keeps the mouse pad securely in place even during the most intense gaming sessions.

Triple fan kit with four lighting Zones and 34 individually addressable RGB LEDs per fan radiate spellbinding colors and effects on either side | Use the included compact iCUE lighting Node Core to easily control RGB lighting via Corsair iCUE software cutting down cable clutter with simple USB 2 0 and SATA connections | Create mesmerizing animated lighting effects with powerful Corsair iCUE software bringing your system to life with dynamic RGB lighting synchronized across all your icue-compatible products and immersive integrated lighting with compatible games | Keep your system cool with powerful fan speeds up to 1 500 RPM pushing up to 41 8 CFM of air, Sound Level - 26 dBA. Static Pressure - 1.55 mm-H2O | A low-noise semi-transparent 120mm fan blade is engineered for quiet operation while also allowing your RGB lighting to shine through

Dual Fan kit with four lighting Zones and 34 individually addressable RGB LEDs per fan radiate spellbinding colors and effects on either side. | Use the included compact iCUE lighting Node Core to easily control RGB lighting via Corsair iCUE software, cutting down cable clutter with simple USB 2.0 and SATA connections. | Create mesmerizing animated lighting effects with powerful Corsair iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your icue-compatible products and immersive integrated lighting with compatible games. | Keep your system cool with powerful fan speeds up to 1, 250 RPM, pushing up to 50.2 CFM of air.Sound Level:26 dBA | A low-noise, semi-transparent 140mm fan blade is engineered for quiet operation while also allowing your RGB lighting to shine through.

UPC: 843591094382 | Weight: 2.100 lbs

80+ Gold certified: high efficiency operation for lower power consumption, less noise and cooler temperatures. | Tuned for low noise operation: a 140mm rifle Bearing fan with a specially calculated fan curve ensures that fan noise is kept to minimum, even at full load. | 105°C-rated capacitors: industrial-grade capacitors deliver solid electrical performance and reliability. | Microsoft modern standby compatible: extremely fast wake-from-sleep times and better low-load efficiency. | Zero RPM fan mode: at low and medium loads The cooling fan switches off entirely for near-silent operation.

80 plus Gold certified: high efficiency operation for lower power consumption, less noise and cooler temperatures. | Tuned for low noise operation: a 140mm rifle Bearing fan with a specially calculated fan curve ensures that fan noise is kept to minimum, even at full load. | 105°C-rated capacitors: industrial-grade capacitors deliver solid electrical performance and reliability. MTBF hours - 100,000 hours | Microsoft modern standby compatible: extremely fast wake-from-sleep times and better low-load efficiency. | Zero RPM fan mode: at low and medium loads The cooling fan switches off entirely for near-silent operation.

80 PLUS Gold certified for lower power consumption, less noise and cooler temperatures | Tuned for low noise operation even at full load. Compatibility-ATX12V v2.4 and EPS 2.92 standards | Zero RPM fan mode for near-silent operation at low to medium loads | 100% industrial-grade, 105°C rated Japanese capacitors ensure unwavering power and reliability | Fully modular cables, so you only connect the cables your system needs | Fan Size: 140mm

80 Plus Gold certified for lower power consumption, less noise and cooler temperatures | Tuned for low noise operation even at full load; MTBF hours 100,000 hours | Zero RPM fan mode for near silent operation at low to medium loads | 100 percent industrial grade, 105°C rated Japanese capacitors ensure unwavering power and reliability | Fully modular cables, so you only connect the cables your system needs

80+ gold Certified high efficiency operation for lower power consumption less noise and cooler temperatures | Tuned for Low noise operation a specially set fan curve ensures that even at full load fan noise is kept to a minimum | Zero rpm fan mode at Low and medium loads the cooling fan switches off entirely for near-silent operation | 100% all Japanese capacitors premium internal components ensure unwavering power delivery and long-term reliability | Fully modular flat cables flexible fully modular flat White cables for Easy cable routing

Support 2 5"-3 5" drive bays | Compatible with all Corsair SSDs | Bays 1 x internal - 2 5"

Durable aluminum construction and iconic design, combine to create the ultimate display for your headset | Dynamic RGB lighting across 9 zones allows for virtually unlimited color options | Built-in 3.5mm analog input enables full range Stereo or 7.1 Surround sound for an immersive, multi-channel Audio experience | Easy access, Dual USB 3.1 inputs provide improved charging power and faster data speeds for your headset, phone and other devices | Non-slip, rubberized base provides stability and protection for your headset | CORSAIR iCUE software enables custom audio equalizer settings, immersive 7.1 surround sound, sidetone control and RGB lighting synchronization with compatible CORSAIR peripherals, coolers, fans and more | Works great with all iCUE compatible hardware

Enthusiast CPU Thermal Compound: Premium Zinc Oxide based thermal compound for optimal thermal performance. | Cools your CPU and GPU: Install new, or replace existing thermal compound on your CPU and GPU to improve heat transfer and lower temperatures. | Improved CPU Cooling: Ultra-low thermal impedance lowers CPU temperatures vs common thermal paste. | Installation Made Easy: An included application stencil and spreader take the guesswork out of applying XTM50 to your CPU cooler. | Filling the Gap: XTM50’s low-viscosity allows it to easily fill microscopic abrasions and channels for peak thermal transfer. | Long Service Life: XTM50’s high-stability liquid compound lasts for years with no drying, cracking or change in consistency. | Safe For You And Your PC: Non-conductive and contains zero volatile compounds.

Superior overclockability through careful screening | Optimized for Compatibility with the Latest CPUs and Motherboards | XMP Memory Profile for simple, safe overclocking | World-famous reliability and performance, Lifetime limited warranty

Hand-sorted memory chips ensure high performance with generous overclocking headroom. | Vengeance LPX is optimized for wide compatibility with the latest Intel and AMD DDR4 motherboards. | A low-profile height of just 34mm ensures that vengeance LPX even fits in most small-form-factor builds. | A high-performance PCB guarantees strong signal quality and stability for superior Overclocking ability. | A solid aluminum heatspreader efficiently dissipates heat from each module so that they consistently run at high clock speeds. | Supports Intel XMP 2.0 for simple one-setting installation and setup. | Available in multiple colors to match the style of your system.

Hand-sorted memory chips ensure high performance with generous Overclocking headroom. | Vengeance LPX is optimized for wide compatibility with the latest Intel and AMD DDR4 motherboards. | A low-profile height of just 34mm ensures that vengeance LPX even fits in most small-form-factor builds. | A high-performance PCB guarantees strong signal quality and stability for superior Overclocking ability. | A solid aluminum heatspreader efficiently dissipates heat from each module so that they consistently run at high clock speeds. | Supports Intel XMP 2.0 for simple one-setting installation and setup. | Available in multiple colors to match the style of your system.