Please note that this cable only works for Sony dcr -trv75e dv this model. | It can not work for other 1394 or usb device either. | This product can not apply for other Sony models. | USB Male to Firewire IEEE 1394 4 Pin Male iLink Adapter Cord Cable Length: 100cm | Supports IEEE 1394 transfer rates of 100/200/400 Mbits | Fully Firewire and iLINK compatible | Molded strain relief enhances durabili

Male to Female cable;50cm | Hard Disk SFF-8482 SAS Cable 29Pin Male to Female Extension Cable;SAS 29 pin straight SFF-8482 | UL2725 26AWG SATA CABLE JACKET RoHS;

Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and SATA Power Cable | enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD. | Hard Disk Fanout Raid cable | Host: SFF-8087 connector | Target: SFF-8482 SAS connector With SATA 15pin power connector 100cm

High quality generic (non-oem) Mini USB Female to Micro USB 5 Pin Male Data Charge Adapter work for Tablet & Cell Phone | Mini USB Female to Micro USB 5 Pin Male Adapter can use your Mini USB chargers, data cables, and headsets on devices with Micro USB ports | Mini USB Female to Micro USB 5 Pin Male Adapter can connect most HTC, Samsung, Motorola, Blackberry phones use micro USB | Mini USB male to Micro usb female Adapter Can charge and trasfer Data with Computer.Compatible with: Most Devices that uses Mini USB. (Mini USB charger and Micro USB Phones and Headsets) | Pack: 1pc Mini USB Female to Micro USB 5 Pin Male Adapter and 1 pc Mini USB Male to Micro USB Female Adapter

You need to install the VLI USB3.0 driver for your computer first. | Port: 4 external USB3.0 ports , Speed: Data Transfer rate of 1.5/12/480/5000 Mbps. | 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard | Compatible: USB1.1/2.0/3.0 | Operating Systems: Windows7/8/10(32/64bit)

With this adapter, you would replace HDD with CF card as SSD. Excellent for Laptop with IDE slot and mini-ITX | ​ Type I, II & Microdrive Compact Flash supported Jumper Selectable for Master/Slave | Support all FIXED DISC MODE CF card in the market Operate in TRUE IDE MODE and support UDMA mode, Bootable on any Operating System, e.g. Linux, DOS and Windows | ATTENTION!!!UDMA requires Support from your Notebook Bios and also the CF card | Special male IDE connector, check carefully the side of the IDE connector before purchase.

It may be used in any application where 1.8"micro SATA SSD drive: | Intel mSATA series SSD and compatible Storage Device | Samsung PM800 series SSD and compatible Storage Device | Toshiba mSATA SSD and compatible Storage Device | mSATA SSD to a 1.8 micro SATA 16pin Adapter Card is compliant with 1.8"

Card Compatibility: MICRO SD/SDXC/TF card | Mini Size 5Gbps Super Speed USB 3.0 to Micro SD SDXC TF Card Reader Adapter | High speed data transfer up tp 5 Gbps. | Powers via USB port, no additional power supply needed. | Compatible for Windows ME,2000,XP,Vista,WIN 7 and Mac OS with USB interface.

This is CFast to SATA adapter,the size is as same as 2.5" HDD,any memory CFast card is accepted by the adapter. | Reads and writes to CFast type I via standard SATA/USB3.0 interface | Supports hot swap when attached to a SATA/USB port that supports this feature | OS Independent, no software driver required | The CF card & HDD not included.

This SAS cable can be used to connect internal devices, e.g. a hard disk with SATA 7pin connector to a controller with Slim SAS SFF-8654 4i connector. | 1.Smaller size connector and cable saves device space | 2.Provide four channels signal transmission as per industry standard | 3.Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel | 4.Meet SAS3.0, Ultraport SlimSAS SFF-8654 specification

U.2 U2 Kit SFF-8639 NVME PCIe SSD Adapter & cable for Mainboard Intel SSD 750 M.2 SFF-8643 Mini SAS HD | Hyper Kit Storage controller ,Ultra M.2 Card , 4 GBps , PCIe 3.0 x4.Note: for M-key or NVME SSD, please Update to add native driver support in NVM Express in Windows 7 and Windows Server 2008 R2 | Specification:Connector:1 x 36 pin SFF-8643 female ; 1 x NGFF PCI Express x4, V3.0 | Data transfer rate up to 12 Gbps . Supports NVM Express (NVMe). System requirements: Windows 7/7-64/8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.16 ; PC with one free PCI Express x4 / x8 / x16 / x32 slot | Package included:1. Nvme U.2 to SFF-8639 PCBA Adapter ; 2. Nvme U.2 to SFF-8639 cable 50cm

5pcs/set Micro SD TF to SD Card Kit Mini Adaptor for Extra Storage MAC Air / Pro / Retina | Support Micro SD / Micro SDHC / Micro SDXC, (The memory card not included) | Support UHS-1 TF CARD, Micro SD / Micro SDHC / Micro SDXC | Color: White; Length: 20mm approximately; | Short Body SD card kit for MAC (Please make sure your MAC with SD card slot first)

Dual Ports Mini SAS HD SFF-8644 To Internal SAS HD SFF-8643 PCBA Female Adapter With Low Profile Bracket, 2-Ports SFF-8643 to SFF-8644 Adapter with Full PCI Slot Profile Mounting Bracket; | External 8644 to internal 8643 adapter, will work both on the host and device side. | Supports External SFF-8644 Host Connectors. Supports Internal SFF-8643 Device Connectors | Supports up to 12Gb/s Mini SAS HD Data Transfer Rate, With Lowe Profile and Standard Profile bracket. | The High Density (HD) system referenced as HD Mini-SAS (SFF-8644) in the SAS 2.1 standard, meets the 12Gb/s SAS specification. These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gb/s.

for Desktop & 3.5" Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB | Supports IDE 66/100/133MB/s . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD. | No need for an extra power supply. | No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. | 3.5 inch IDE/PATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA

Compatible with ALL DMS-59 video cards | Work for PC Graphics Card | Will allow you to connect your DMS-59 video card to standard vga connector! | LFH DMS-59pin Male to 15Pin VGA RGB Female Extension Adapter | Please do your own additional application research before buying, we cannot provide technical support for programmingInstructions, manuals, install disks, additional hardware, or software are not included unless specified in this listing.

Main control chip: JMB585.
Interface: 5 * SATA3.0 interface.
Applicable slot: NGFF Key-M PCI Express.
| It has 5 SATA3.0 interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps. | With hot swap and hot plug capabilities, and power management functions; | Support error reporting, recovery and correction;Supports partial and sleep power management states;Support Gen1i, Gen1x, Gen2i, Gen2m, Gen2x and Gen3i; | Supports native command queue (NEQ). Under high load, NCQ technology can guarantee the performance and stability of the hard disk.

You have to format with FAT32 when you install OS on the CF memory,Use CF card as DOM: power supply from external floppy drive power socket. | You can save money by using CF memory card when you test on computer. Computer is rebooted suddenly because of electrical signal at electric factory. | In this case, CF memory card has the low extent of the damage. | CF Compact Flash Merory Card to 50pin 1.8 Inch IDE Hard Drive SSD Converter Adapter It is stable and doesn't have any noise and vibration | Master/slave etting jumper ； PCB color: Black or Green

Note: SD card cannot plug in fully : MacBook Retina 15": 2013 or later ==>will be out of 3-5mm ; MacBook Retina 13": Mid 2012, 2013, 2014 ==>will be out of 3-5mm | Work for Extra Storage ( Please make sure your macbook with SD card slot first) : MacBook Pro 13": Mid 2009, 2010, 2011, 2012, 2013, 2014 | MacBook Pro 15": Mid 2009, 2010, 2011, 2012, 2013, 2014 ; MacBook Pro 17": Mid 2012, 2013, 2014 | MacBook Air 13": Late 2010, 2011, 2012, 2013, 2014 ; MacBook Retina 15": Mid 2012 | Package includes 1 piece white adapter , memory card not included . 20mm approximately Micro SD TF to SD Card Kit Mini Adaptor supports Micro SD / Micro SDHC / Micro SDXC

Internal Mini SAS SFF-8087 Host to 4 SATA 7pin Target Hard Disk 6Gbps Data Server Raid Cable. | Mini-SAS cable configurations,The SAS system referenced as Mini-SAS (SFF-8087) in the SAS 2.1 standard, meets the 6Gb/s SAS specification. | Internal Mini-SAS Copper Cables,Internal Mini SAS SFF-8087 to to 4 SATA 7pin hard disk data Cable. | This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS SFF-8087 controller. | Cable length:50cm

enables you to connect e.g. a controller with mini SAS 36pin connector (SFF 8087) to 4 SAS (SFF 8482) HDD. | Hard Disk Fanout Raid cable | Host: SFF-8087 connector
| Target: 4xSFF-8482 SAS connector | With SATA 15pin power connector

Note:The SSD must be 16+12pin contacts.(see belowing photo,otherwise it cannot work). | System requirement:
1.Motherboard: Z97 or later.
2.Windows 10 or later. | Compatibility With:
2013 Macbook Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD.
2013 MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD.
2013 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD.
| 2014 Macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD.
2014 MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD.
2015 MacBook Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD.
2015 MacBook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD.
| With Standard PCI Back Bracket.

Note: | 1. It can connect the SATA hard disk to SATA motherboard. | 2. It can connect the SAS hard disk to SAS motherboard. | 3. It can't connect the SAS hard disk to normal SATA motherboard. (it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.) | 4. It can't connect the SATA hard disk to normal SAS motherboard. (it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.)

Connect the SATA hard disk to SATA motherboard , CAN NOT connect the SATA hard disk to normal SAS motherboard. (unless your hard disk has the SAS chipset,) | Connect the SAS hard disk to SAS motherboard.CAN NOT connect the SAS hard disk to normal SATA motherboard.(unless your motherboard has the SAS chipset,) | Connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller) | Connector Details:1 x 7 Pin Serial SATA Male, 1 x 15Pin Male Power,1 x 22 Pin SFF-8482 SAS | SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin SATA Hard Disk Drive Raid Adapter with 15 Pin Power Port

External 8644 to internal 8087 adapter, will work both on the host and device side. | Supports External SFF-8644 Host Connectors. | Supports Internal SFF-8087 Device Connectors. | Supports up to 12Gb/s Mini SAS HD Data Transfer Rate. | With Lowe Profile and Standard Profile bracket.

This cable can be used to connect internal devices, e.g. a backplane with Slim Line 8654 74pin connector to a controller with SFF-8643 connector. | Ultraport Slimline 8i 74Pos Cable Assembly,Length: 50cm. | Connector 1: Slimline SFF-8654 8i 74pin,Connector 2: Dual SFF-8643 Mini SAS HD. | Applications for Servers,Data Storage,Workstation,Meet PCIe Gen3/4 and SAS4.0 specification. | Data speed: 24Gbps for SAS and 8GT/s for PCIe per channel.

2-Ports SFF-8087 to SFF-8088 Adapter with Full PCI Slot Profile Mounting Bracket; External 8088 to internal 8087 adapter, will work both on the host and device side. | Supports External SFF-8088 26-pin Host Connectors. Supports Internal SFF-8087 36-pin Device Connectors | Supports up to 6Gb/s Mini SAS Data Transfer Rate | Supports SFF-8087 to SATA Device Octopus Cables, SFF-8087 to SAS Device Octopus Cables, SFF-8087 to SFF-8087 Mini SAS Device Cables | With Lowe Profile and Standard Profile bracket.

Connector1: USB 3.0 Front Panel Socket / Connector2: USB 3.1 Front Panel Header | The adapter is a converter to convert the available USB 3.0 header of a motherboard into a USB 3.1 header. Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. | Even the most up-to-date motherboards with AMD AM4 or Intel 2066 sockets are not always equipped with a USB 3.1 header. The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. | The small converter is plugged into a USB 3.0 header that provides two USB 3.0 lanes. Thus, two data lines with 5 Gbps each are available, which are bundled into a USB 3.1 header with 10 Gbit / s. | The converter thus provides a full-fledged USB 3.1 port.

Work for NEMA 1-15P to NEMA 1-15R | Extend your power cord AND keep your UPS and surge outlets free | Extend powered devices away from wall outlets | Durable, heavy-duty construction USA Outlet Saver Power Extension Cord Cable 2-prong 2 Outlets | Length: 50cm . The female connector plugs directly into the device power cable while the male connector plugs into a standard outlet.

for Desktops Graphics Card | Designed for changing ATX 8PIN cable installation direction | Can install the 8PIN power cable from vertical to horizontal direction with this adapter which will solve the PSU installation for the limited height chassis | ATX 8Pin Female to 8pin Male 180 Degree Angled Power Adapter | Package included 2pcs adapters.(up angled+down angled)

Replace your 1.8" ZIF harddisk with this adapter by a Compact Flash (CF) Card (up to 32Gb) Bootable on any system, supports DOS/ Windows 3.1, 95, NT, 98, Me, 2000, XP, Vista / Linux/ Mac | 50-Pin standard compact flash socket, Support all CF cards including type I, II and Microdrive. Supports DMA and Ultra DMA modes. A compatible flash media card will be required to use these modes. | Works as a HDD in TRUE IDE MODE! (please also make sure your CF card with true-IDE molde first, otherwise cannot work) | NO NOISE and LOW TEMPERATURE, Excellent for mini-ITX and Laptop/Notebook/Netbook NO external power is needed to operate | Package comes with 2 ZIF cables. One is for Toshiba HDD (bule to white color) ; Another one is for Hitachi HDD (blue to blue color)

IEC Male C14 to Right Angled 90 Degree IEC Female C13 Power Extension Adapter | A down right angled power connector. | You'll want to check your device to see which way the cable would exit when plugged in. | Please see follow Product description :

2pcs 90 Degree Left & Right Angled Micro USB 2.0 OTG Host Adapter with USB Power for Cell Phone & Tablet | This USB Host adapter allows you to connect a USB memory stick, an USB 2.0 memory card reader, or a keyboard to your Tablet & Cell Phone. | (some standard USB 2.0 devices need to connect the extral usb power cable if they consume too much power) | PC-free back up of videos and photos from Tablet & Cell Phone to an external memory stick in a convenient way. | Connect to a keyboard for easier control of your Tablet & Cell Phone. Compatible with Samsung Galaxy S3 i9300 S4 i9500 Note2 N7100 Note3 N9000 & S5 i9600 and All Micro USB OTG function tablet/phone Note: The extral USB Cable is the Power for USB Device(Like usb hard disk, flash disk), Can not charge the Tablet & Cell Phone. Package: 1 x Left Angled Adapter 1 x Right Angled Adapter

1. The adapter can work for 50*30mm size MSATA SSD. | 2. Support WindowXP/2003/Vista/7, Linux , Mac systems | 3. Standard input SATA-22P(15+7) to 50pin MSATA | Note: 1. Not compatible with MINI PCI-E SATA SSD?eg. Brand ASUS EeePC SSD ; 2. Not compatible with M.2 NGFF SSD(B-key or M-key) | Mini PCI-E mSATA SSD to 2.5" SATA Hard Disk Enclosure Case Converter Adapter for Intel Samsung Asus Black

This adapter using JM20330 Serial ATA Bridge Chip. | 50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. ? | Case Size:70mm x 10mm X 9.5mm | Used with MSATA(Mini PCI-E SATA) SSD ONLY!

Work for Notebook Laptop ; | ONLY used with NGFF B/M-key SSD ! CAN NOT work for M-key and NVME SSD. | Case Size:70mm x 10mm X 9.5mm | This adapter using JM20330 Serial ATA Bridge Chip. | NGFF B/M-key SSD to 2.5 inch IDE 44Pin Hard Disk Case Enclosure

PVC Overmold for the adapter. | The angled ATX Power completely solves the problem of excessively lardge power cords on the motherboard and makes the wiring more beautiful. | The adapter is designed for changing ATX 24PIN cable installation direction. | You can install the 24PIN power cable from vertical to horizontal direction with this adapter. | Which will solve the PSU installation for the limited height chassis.

PCI Express PCI-E 4X M.2 NGFF M-Key to 2013 2014 2015 Apple Macbook SSD Convert Card for A1493 A1502 A1465 A1466 4-lane (x4) PCI Express M.2 NGFF M-Key throughput rates up to 5 Gbps | It only support the Macbook SSD to NGFF M-key SSD, It cannot convert to NGFF B-key or B+M key. It cannot convert to USB port ot SATA port. | Please make sure your NGFF slot support the PCI-E 4x/2x Support Windows XP/Vista/Windows 7/Windows 8 | The SSD is not included.Note: The SSD must be 16+12pin contacts.(see belowing photo,otherwise it cannot work) | Note: The adapter only work for M-key socket, cannot work for B-key or B/M-key socket.

Hard Disk SFF-8482 SAS Cable 29Pin Male to Female Extension Cable | SAS 29 pin straight SFF-8482 Male to Female cable | Lenght : 50cm | UL2725 26AWG SATA CABLE JACKET RoHS

Support 16/32/64/128GB Standard SD card.Support: SD SDHC SDXC | Can put the SD card to the CF type I slot. Don't support CF-2 | Camera SD SDHC SDXC to High-Speed Extreme Compact Flash CF Type I Memory Card Adapter | it may can fit your card if your camera model number are not listed in the description, please feel free to contact us to confirm the compatibility. | No Memory card in the package.