Fit for: 80/90/102/130 aperture telescope and Sky-watcher/Maxvision/MEADE 150 primary mirror. | Using: Can be used as shoulder bag and hand bag. | With thickened sponge for the whole bag, shockproof and comfortable. | There is accessory placing bag and mirror tube bag for convenient storage to avoid scratches. | Size: 105*20*20cm(41*7.9*7.9inch), Weight:1.2kg(2.65IB).
This is a C-Mount to CS-mount lens adapter ring for all types of CCTV camera. | 0.5/1/2/5/7/8/9/10/15/20/25/30/35/40/45/50/100mm Adapter Ring attaches between lens and camera and converts a C-Mount Lens for use on a CS-Mount Camera. | Compatible with: CCTV Security Camera. | Size: external diameter: 31mm; internal diameter: 24.5mm(Manual measurement). | Material: matte aluminum.
This is a C-Mount to CS-mount lens adapter ring for all types of CCTV camera. | 0.5/1/2/5/7/8/9/10/15/20/25/30/35/40/45/50/100mm Adapter Ring attaches between lens and camera and converts a C-Mount Lens for use on a CS-Mount Camera. | Compatible with: CCTV Security Camera. | Size: external diameter: 31mm; internal diameter: 24.5mm(Manual measurement). | Material: matte aluminum.
M12 Female to C/CS/M25 Male adapter ring | This adapter ring attaches between the lens and the camera and enables an M12 Lens to be mounted onto a C Mount or CS Mount Camera. | Made of high-quality aluminium material, durable, firm and stable for us to use and has a long service life. | Compatibility for all M12 lens and for all C-mount and CS mount camera.
Specially designed for 127SLT, it can not only install the telescope, but also install theodolite, finderscope, zenith mirror, remote control, eyepieces etc. | Durable ABS-clad case exterior with reinforced edging, dual metal hinges and two lockable metal latches. it is not only strong and durable, but also reduces the weight to the maximum extent. | Your kit will remain safe in a protective metal, foam-lined carrying lens filter case, perfect for organizing each piece and keeping your equipment ready to use. | Size: 40X 24X44cm (15.7*9.5*17.3inch) length/width /height. | Net weight: 4.5kg.
Specially designed for Sky-Watcher Star Adventurer Equatorial, it can not only install the Star Adventurer, but alsoMount, Equatorial base, Declination bracket, Counterweight kit, Ball head adapter, Polar scope illuminator. | Durable ABS-clad case exterior with reinforced edging, dual metal hinges and two lockable metal latches. it is not only strong and durable, but also reduces the weight to the maximum extent. | Your kit will remain safe in a protective metal, foam-lined carrying lens filter case, perfect for organizing each piece and keeping your equipment ready to use. | Size: 31.5*17*28.5cm (12.4*6.7*11.2inch) length/width /height. | Net weight without telescope: 2.2kg, with the all the items in: 5.7kg
* Large heavyhammer bag is suitable for flat hammer. There are spacers in the middle, and multiple hammer can be stacked. | * They can be stored at home to prevent the floor from being hit or broken. | * They can also be put in car to prevent rolling in the carriage. | * Can be carry on shoulders if it is too heavy. | * You can also install cameras, lenses, eyepieces,various astronomical accessories, etc.
* Small heavy hammer bag is applicable to cylindrical hammer. | * They can be stored at home to prevent the floor from being hit or broken. | * They can also be put in car to prevent rolling in the carriage. | * Can be carry on shoulders if it is too heavy. | * You can also install cameras, lenses, eyepieces,various astronomical accessories, etc.
Specially designed to detach lens pressing ring | Made of high-quality rubber, durable and stable, high friction and good elasticity | Each surface has the hollow design ,avoid scratches when remove lens | Each Piece has two sizes for use, total 18 kinds of different size | Size: (Diameter)8-16mm, 22-32mm, 25-28mm, 26-36mm, 41-47mm, 50-53mm, 56-65mm, 60-70mm, 75-83mm
M12 Female to C/CS/M25 female adapter ring. | This adapter ring attaches between the lens and the camera and enables an M12 mounted onto a C Mount or CS Mount mount. | Made of high-quality aluminium material, durable, firm and stable for us to use and has a long service life. | Compatibility for all M12 and for all C-mount and CS mount.
The product uses double-layer silver plating material, and the fabric is thickened. | Effective dew proof, sun protection, dust proof. | Can also prevent light damage during observation, solar eclipse observation is able to improve the contrast. | There are large double open zippers in front and back. It can be used half-open or full-open. | Size: 100*75cm.
Carry your most trusted eyepieces, barlow lens and other accessories with you, with this convenient foam lined waist bag and keep your eyepieces safe and at your fingertip. | Adjustable Waist Belt: The smooth nylon waist belt of waist bag can be adjusted easily to fit your waist properly and takes you the maximum comfortle | Water Resistant Material: (Do not into the water) Premium water resistant nylon outer material allows this waist pack durable and anti-abrasion, and perfectly protecting your eyepiece against raindrops, sweat and moist. | Large space: There is enough room for either 7 x 1.25" eyepieces or 4 x 1.25" eyepieces + 3 x 2" eyepieces. | Compartments pack: The front pocket could accomodate your mobile phone or a small torch while the side zippers can house cleaning cloths or other thin accessories.
SPECIAL: Every cap with different wood grain, the texture and pattern is different for every natural wood, that makes your camera unique. | COMPATIBILITY: Compatible with Fujifilm Fuji X-T4 X-T3 X-T2 X-T1 GFX 50R 50S 100 X-H1, NIKON D200 D300 D810 D800 D700 D1 D1H D1X D2 D2H D2Hs D2X F5 F100 F90 F90X N90 N90X. | MATERIAL: Made of high quality wood and brass thread screw part with rubber rings. | TECHNOLOGY: Hand made polished, Beeswax polishing, No paint. | Size: Height: 5.2mm/ Width: 9mm.
SPECIAL: Every cap with different wood grain, the texture and pattern is different for every natural wood, that makes your camera unique. | COMPATIBILITY: Compatible with Fujifilm Fuji X-T4 X-T3 X-T2 X-T1 GFX 50R 50S 100 X-H1, NIKON D200 D300 D810 D800 D700 D1 D1H D1X D2 D2H D2Hs D2X F5 F100 F90 F90X N90 N90X. | MATERIAL: Made of high quality wood and brass thread screw part with rubber rings. | TECHNOLOGY: Hand made polished, Beeswax polishing, No paint. | Size: Height: 5.2mm/ Width: 9mm.