➤ The motorcycle phone mount wireless charger output 15W max, USB C port output 20W max. This motorcycle phone charger mount supports charging two compatible devices at the same time. IP66 waterproof. | ➤ The motorcycle phone holder USB C port can be connect to power bank or USB socket as power input port. At this time, the power switch does not work, you can charge cellphones through wireless charger only. | ➤ The motorcycle cell phone mount adopts a convenient design. Put on or take out your phone with just one hand in 1s. 360 rotation design, adjust the angle freely according to your needs. | ➤ Safe and sturdy: Adopts aluminum alloy handlebar ball mount, TPU over-molding ball joint, with anti-slip performance. Telescopic arm made of stainless steel, super sturdy. A special shape design of this motorcycle phone holder can be wrapping your mobile phone tightly! Built-in with shockproof silicone. Keep your phone safe even when riding on bumpy roads. | ➤ Wide compatibility: The universal motorcycle phone mount fit for 4'' - 7'' cellphones. Compatible with mobile phone thickness less than 16mm. Suitable for handlebars 0.87'' to 1.26'' in diameter. Can be installed on the handlebar or motorcycle mirror.

The marine electronic plate consists of a B size 1'' TPU ball connected to a 6.25" x 2" rectangle plate. The rectangle plate features 20 pre-drilled holes will match many electronic devices and mounts, including marine fish finders and GPS chartplotters, CB radios, Ham radios, gimbal brackets, and more | NOTE: This plate is a universal mounting bracket with a variety of mounting hole locations. In some applications, additional holes may need to be drilled to properly fit your electronics | The rectangular plate made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. TPU over-molded ball head, anti-slip and wear-resistant | The 1'' ball square plate compatible with RAM Mounts & BRCOVAN any B size 1'' ball double socket arms. Work for other devices with 1 inch swivel ball mounting pattern | Compatible with Garmin GPS Chartplotters and Fishfinders: GPSMAP 722, GPSMAP 722xs, GPSMAP 742, GPSMAP 742xs; Striker Plus 5cv, Striker Plus 7cv, Striker Plus 7sv; ECHOMAP Plus 72cv, ECHOMAP Plus 73cv, ECHOMAP Plus 74cv, ECHOMAP Plus 75cv, ECHOMAP Plus 77cv | Compatible with Lowrance GPS Chartplotters and Fishfinders: HDS Carbon 7, HDS LIVE 7, Hook Reveal 7 Series, Hook Reveal 9 Series. | Compatible with Humminbird GPS Chartplotters and Fishfinders. Note: does not fit Helix 5, 7, 8, 9, 10, 12, 15 and solix 10. Compatible with Raymarine GPS Chartplotters and Fishfinders

▶ The ball mount consists of a B size 1'' TPU ball connected to a 2" x 1.69" square plate. The square plate features industry-standard AMPS hole pattern with four pre-drilled holes at each corner. | ▶ The square plate made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. TPU over-molded ball head, non-slip and wear-resistant. | ▶ The 1'' ball mount base compatible with RAM Mounts & BRCOVAN any B size 1'' ball double socket arms. Work for other devices with 1 inch swivel ball mounting pattern. Compatible with Garmin devices.

▶ The double ball adapter is connected by an aluminum alloy rod. TPU over-molding ball head, non-slip and wear-resistant. | ▶ The 17mm (0.67 inch) ball joint compatible with Garmin GPS mount 17mm swivel ball mounting pattern. | ▶ The 1 inch (25.4mm) ball joint compatible with RAM Mounts B size 1'' ball double socket arm. | ▶ Widely used on bike & motorcycle phone holder, navigation brackets and other electronic equipment mounts.

▶ The ball base consists of a B size 1" ball, connected to a M10 x 1.25 male threaded steel post. | ▶ TPU over-molding ball joint, wear-resistant and anti-slip, for durability and reliability in the most demanding environments. | ▶ The 1'' ball base allows for connection to RAM & BRCOVAN any B size double socket arm. | ▶ The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length. | ▶ Pack of 2

▶ This is 1'' (25.4mm) ball to 1'' (25.4mm) ball adapter, compatible with RAM Mounts and BRCOVAN any B size 1 inch ball double socket arm. | ▶ Consists of two B size 1" balls connected by a 0.78" length post. When measured from ball center to ball center, the length is 1.69". Overall length 2.48''. | ▶ Ball and post are made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, durable. | ▶ Pack of 2

▶ This is 1'' (25mm) to 1'' (25mm) ball adapter, compatible with RAM MOUNTS and BRCOVAN any B size double socket arm. | ▶ Consists of two B size 1" balls connected by a 0.78" length post. When measured from ball center to ball center, the length is 1.69". Overall length 2.48''. | ▶ Ball and post are made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments

The anti-theft 1'' ball double socket arm made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments | Designed with anti-theft special screw, and the package come with a special wrench to adjust this special screw. This design prevents the device attached to the dual socket arm from being easily removed. Provides extra security for your device | With an overall length 2.36'' | Compatible with RAM Mounts & BRCOVAN any B size 1'' ball components, including mounting bases and device holders. | Suitable for other 1" ball device mounts, such as bike phone mounts, motorcycle phone holders, action camera mounts, navigation mounts, marine electronic mounts, etc.

▶ The main body of the 1.5'' ball mount base is made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. TPU over-molded ball head, non-slip and wear-resistant. | ▶ The 1.5 inch ball bar clamp mount kit comes with three soft rubber ring inserts that provide a snug fit and protect the mounting surface. Three rubber ring diameters: 0.875" (22mm), 1" (25.4mm), 1.125" (28.6mm). The rubber ring can be increased or decreased according to the diameter of the round rails. The round rail mount base have a 1.26" (32mm) diameter mounting hole when without the rubber ring insert. | ▶ The 1.5'' ball rail mount accommodates handlebars or round rails 0.875 inch (22mm) / 1 inch (25.4mm) / 1.125 inch (28.6mm) / 1.26 inch (32mm) in diameter. An Allen key is included with the package to facilitate your installation. | ▶ The 1.5 inch ball tube clamp mount compatible with RAM Mounts and BRCOVAN any C size 1.5 inch ball double socket arm. Work for other devices with 1.5 inch swivel ball mounting pattern. Great for marine electronic mounts, fish finder mounts, GPS Chartplotter mounts, industrial tablet mount, industrial Monitor mount, navigation device mounts, camcorder mounts, rod holders and much more in a wide variety of applications. | ▶ Ideal for mounting on the handlebars of bicycles, motorcycles, scooters, and other round rails of compatible sizes.

▶ The diamond ball Base with B size 1" ball. The center-to-center distance between the two mounting holes is 1.91'' (48.6mm) | ▶ Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable. TPU over-molded ball head, non-slip and wear-resistant. | ▶ This 1 inch ball mount base compatible with RAM Mounts & BRCOVAN any B size 1'' ball double socket arms. Work for other devices with 1 inch swivel ball mounting pattern.

▶ Tool-free installation and removal designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 0.5" to 2" in outer diameter. | ▶ The main body of the 1.5'' ball mount is made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. TPU over-molded ball head, non-slip and wear-resistant. Aluminum alloy tough-claw with built-in TPU provide stable gripping and protection of mounting surface. | ▶ This 1.5 inch ball handlebar clamp mount compatible with RAM Mounts any C size 1.5'' ball double socket arm. Work for other devices with 1.5 inch swivel ball mounting pattern. Great for marine electronic mounts, fish finder mounts, GPS Chartplotter mounts, industrial tablet mount, industrial Monitor mount, navigation device mounts, camcorder mounts, rod holders and much more in a wide variety of applications. | ▶ Perfectly suited for mounting on the yoke of an aircraft, handlebars of bikes/bicycles/motorcycles/strollers/mountain bikes/dirt bikes/trek bikes/road bikes/golf carts/electric scooters/ATV, or even on kayak rails and UTV roll cage.

▶ This 17mm (0.67'') ball handlebar clamp mount accommodates handlebars 0.5 inch (12mm) / 0.87 inch (22mm) / 1 inch (25.4mm) / 1.26 inch (32mm) in diameter. Tool-free design for easy installation or removal. | ▶ Package come with three soft rubber ring inserts to provide a snug fit and protection of the mounting surface. Rubber ring inserts diameter: 0.5''(12mm), 0.87''(22mm), 1''(25.4mm). You can add or remove rubber ring according to the diameter of handlebar. When the rubber ring insert is not embedded, the hole diameter of the handlebar mounting base is 1.26" (32mm). | ▶ The handlebar ball mount utilizes rubber-insert and lock-bolt to prevent loosening in high vibration for mounting to motorcycle & bike handlebars and rear-view mirror as well as other round rails within the stated dimensions. | ▶ Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable. TPU over-molded ball head, non-slip and wear-resistant. | ▶ This 17mm (0.67'') ball handlebar mounting base compatible with 17mm (0.67'') ball socket system. Not for 1 inch ball socket system. Works for Garmin GPS bracket & bike motorcycle phone mount holder with 17mm swivel ball mounting pattern.

▶ Super sturdy: This 17mm(0.67inch) ball handlebar mount base made of 6061-T6 aluminum alloy material. TPU over-molding ball head, with non-slip design. | ▶ The 17mm ball mount base accommodates handlebars 0.5 inch(12mm) / 0.87''(22mm) / 1''(25mm) / 1.26 inch(32mm) in diameter. | ▶ Set come with three soft rubber ring inserts to provide a snug fit and protection of the mounting surface. Rubber ring diameter: 0.5 inch(12mm), 0.87 inch(22mm), 1 inch(25.4mm). You can add or remove them depending on the size of the handlebars. When the rubber ring insert is not embedded, the hole diameter of the mounting base is 1.26" (32mm). | ▶ The attached 0.5-inch rubber insert allows you to install the ball base on the rear-view mirror frame or mini handlebar. The package also come with an 8cm non-slip tape and an Allen key. | ▶ This 17mm(0.67 inch) ball handlebar mount base only compatible with 17mm ball socket component, including some double socket arms, navigation mounts, action camera mounts, bike & motorcycle phone mount holders and others electronic device holders. Suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV, etc. | ▶ Please note: This is 17mm(0.67 inch) ball base, not 1 inch ball base. It only compatible with 17mm ball socket systems. Works for Garmin Nuvi Dezl Drive Drivesmart Zumo Driveassist DriveLuxe StreetPilot RV GPS series devices with 17mm swivel ball mounting pattern.

▶ This 1 inch ball mount base features a 10mm mounting hole designed to attach to the motorcycle rear-view mirror or bolt head. | ▶ Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable. TPU over-molded ball head, non-slip and wear-resistant. | ▶ Compatible with RAM Mounts & BRCOVAN any B size 1'' ball double socket arm. Work for other devices with 1 inch swivel ball mounting pattern. | ▶ Set of 1

The motorcycle brake/clutch reservoir mount base with B size 1" TPU ball. Compatible with RAM MOUNTS & BRCOVAN any B size 1 inch ball double socket arm | Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable. TPU over-molded ball head, non-slip and wear-resistant | Hardware Included: (2) M6 x 45mm Stainless Steel Hex Bolt, (2) 1/4'' x 1-3/4 Stainless Steel Hex Bolt, (2) 1/2" Spacers | Check before installation: To see if the ball base is compatible with your motorcycle. Check that the dimensions of the two mounting holes on the motorcycle brake/clutch reservoir are compatible with the supplied hex bolts, including the diameter, depth, and center-to-center distance of the two holes. This ball base suitable for hole center distances from 0.98" to 1.45"

▶ The ball plate base consists of a C size 1.5'' TPU ball connected to a 6.25" x 2" square plate. The square plate features 20 pre-drilled holes. NOTE: This plate is a universal mounting bracket with a variety of mounting hole locations. In some applications, additional holes may need to be drilled to properly fit your electronics. | ▶ The square plate made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. TPU over-molded ball head, anti-slip and wear-resistant. | ▶ The 1.5'' ball joint compatible with RAM Mounts & BRCOVAN any C size 1.5'' ball double socket arms. Work for other devices with 1.5 inch swivel ball mounting pattern. | ▶ Compatible with Garmin GPS Chartplotters and Fishfinders: GPSMAP 722 GPSMAP 722xs GPSMAP 742 GPSMAP 742xs Striker Plus 5cv Striker Plus 7cv Striker Plus 7sv ECHOMAP Plus 72cv ECHOMAP Plus 73cv ECHOMAP Plus 74cv ECHOMAP Plus 75cv ECHOMAP Plus 77cv. | ▶ Compatible with Lowrance GPS Chartplotters and Fishfinders: HDS Carbon 7 HDS LIVE 7 Hook Reveal 7 Series Hook Reveal 9 Series. | ▶ Compatible with Humminbird GPS Chartplotters and Fishfinders. | ▶ Compatible with Raymarine GPS Chartplotters and Fishfinders.

The B size 1'' ball double socket arm made of high strength composite PA66+GF30% for durability and reliability in the most demanding environments | With an overall length of 3.54'' ( 90mm ) | Compatible with RAM Mounts & BRCOVAN any B size 1'' ball components, including mounting bases and device holders. 1" diameter B size sockets fit for all 1'' diameter ball joints

▶ The B size 1'' ball double socket arm made of high strength composite PA66+GF30% for durability and reliability in the most demanding environments. | ▶ With an overall length of 2.36" ( 60mm ). | ▶ Compatible with RAM Mounts & BRCOVAN any B size 1'' ball components, including mounting bases and device holders. 1" diameter B size sockets fit for all 1'' diameter ball joints.

▶ This 1 inch ball handlebar clamp mount base fit for handlebars 0.5 inch (12mm) / 0.87 inch (22mm) / 1 inch (25.4mm) / 1.26 inch (32mm) in diameter. | ▶ Compatible with RAM Mounts & BRCOVAN any B size 1'' ball double socket arms. | ▶ Main body made of 6061-T6 aluminum alloy. CNC machining and anodized surface.

This handlebar U-bolt mount with 1 inch ball. The 1" ball joint is attached to the aluminum alloy base. TPU over-molded ball head, non-slip and wear-resistant. This 1" ball handlebar mount is secured to the handlebar with a high quality stainless steel U-Bolt. Durable and reliable in the most demanding environments | Compatible with RAM & BRCOVAN any B size 1 inch ball double socket arm. Suitable for mounting to round, square and profiled rails and rear-view mirror bars with outside diameters from 0.5'' to 1.25'' | Hardware Included: (1) 1/4"-20 U-Bolt for 0.5" - 1" Rails, (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails, (2) 1/4"-20 Lock Nuts, (2) Rubber Caps, (2) U-Bolt Spacers, (4) Stainless Steel Spacers