HIGHT SPEED SATA Converter Maximize system speed by adding M.2 SSD performance. | SUPPORTS" M.2 NGFF (SATA Channel) B key M.2 SSD with Open Frame Housing supports 7mm or larger 2.5" SATA bays, and supports SATA I/II/III . | HEAT DISSIPATION SSD to 2.5in SATA Adapter with 2.5in SATA form factor housing and open-frame steel mounting bracket to help maximize heat dissipation. | SUPPORTS full length M.2 NGFF SSDs (2230, 2242, 2260, 2280) / M.2 SSD to SATA Adapter / M.2 NGFF SSD to SATA Adapter for 2.5" Drive Bay / M.2 SSD to SATA Converter. | Support system: WinXP / Vista / Win7 / Win8 32-bit / 64-bit MAC / LINUX (NOT support PCI-E based B key & any M key M.2 SSD|)Supports all SATA standard M2.SSD, does not support NVME M2.SSD.

【PCI-E1X to 16X extension cable】: new design, 1X-16X can be used, the circuit board PCIe adapter cable is newly released, safer, more efficient and more practical! | 【Stable and safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe. | 【Reduce the burden on the motherboard】: the adapter card’s 6PIN interface enhances the power supply, and it can be converted to a SATA port with a SATA to 6PIN line to make the graphics card’s power supply independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected. | 【Rugged cable】: 60 cm USB 3.0 cable for flexible placement of PCI-E devices. The PCI-E connector uses multi-layer shielded wire, which can be connected up to 3M without signal attenuation. | 【Support system】: compatible with all WINDOWS systems, LINUX, MAC

【NGFF to SATA3.0】Boost the speed of M.2 SSD in any 2.5" SATA application with the M.2 SSD to SATA adapter and greatly improve system performance. | 【Faster Transmission Performance】 External SATA3.0 transmission interface, the theoretical transmission rate can reach the full speed of 6Gbps (SATA protocol). (The transfer rate is affected by the device configuration and SSD performance, and deviations from the theoretical data are normal.) | 【Applicable SSD Type】Can be matched with 2TB M.2 B-key large capacity SSD, which supports size specifications: 2230, 2242, 2260, 2280 | 【Support System】WinXP/Win7/Win8/10/11 32bit/64bit/LINUX/MacOS | 【Tips for Use】Only M.2 NGFF SATA SSD is supported, NVME and PCI-E SSD are not supported; 2 SSDs must be connected for simultaneous use; the SSD will reinitialize at the first use, please backup the hard drive data before use; When used, 2 hard drives form a JBOD.

√【PCI-E 1X to 16X riser card】: The high-performance V013-PRO version expands the motherboard PCI-E X1 slot into a PCI-E X16 slot. Mainly used for Ethereum mining equipment or GPU mining equipment. | √【10 capacitors, safer! 】: Use 10 high-quality solid capacitors to ensure stable voltage and current, making the graphics card power supply more stable and safe. | √ 【Temperature control display】: The default setting is "temperature" when the machine is turned on. Press once to display Fahrenheit, press twice to display voltage (12V), press and hold the switch for 5s to turn off or turn on the display and LED lights. When the temperature reaches 75 degrees, the display will flash and alarm. | √ 【Strong power supply】: 6PIN port power supply, making the graphics card power supply independent of the motherboard, reducing the burden on the motherboard when multiple graphics cards are connected. | √【Wide scope of application】: Plug and play, no need to install drivers. A 60 cm USB 3.0 cable for flexible placement of PCI-E devices, helping users to obtain more flexible GPU connections.

【PCI-E 1X to 16X riser card】---VER010-X version, a high-performance PCI Express riser card, which can extend the motherboard PCIE X1 slot to the PCIE X16 slot. Mainly designed for Ethereum/Bitcoin mining equipment or more GPU mining equipment. | 【M.2 NGFF to PCIe Riser Card】--- Use this riser card to convert the M.2 NGFF interface to a normal PCIe1X interface. There are 4 fixed holes on the board, 22*30, 22*42mm, 22*60mm, 22*80mm | 【Note】--- The USB3.0 interface on the M.2 to NGFF adapter card is a PCI-E signal, not a USB signal, and USB devices cannot be connected. | 【Easy installation】--- Plug and play, no driver is required for installation. The PCI-E card can be inserted into any PCI-E slot: x1, x4, x8 or x16. The USB 3.0 transfer cable can flexibly place your PCI-E devices. | 【Support System】--- Compatible with all WINDOWS systems, LINUX, MAC.