This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials. | NPT thread for creating tighter seals than straight threads. | Made of 304 stainless steel, strength and resistance to corrosion. | Temperature range from -30 to +150 degrees F. | Maximum working pressure of 150 psi.

PU Tubing Pipe Material: PU( Poly Urethane ) | PU Tubing Pipe Size: 14mm (Outside diameter) 10mm (Inside diameter) , Package Total Length:16.4 Feet (5meters) | Working Pressure: 1Mpa（145Psi); Burst Pressure: 2.5Mpa(363Psi). | Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2; Anti-abrasion: 35mg; Resistant to Oils With No Corrosive | Tubing Pipe Features: Excellent flexibility, Small bending radius; Good shock resistant; Wide range for working temperature and pressure; Excellent chemical properties, Minimal pressure loss; Constant hardness,Long service life; Non-toxic, Tasteless; Resistant to Oils With No Corrosive

3/4"Female bulkhead connector for water tank, water inlet and outlet, and self-made water storage barrels. | Bulkhead OD 31mm, suitable for about 31.5mm ID hole. | Can be mounted in walls, tanks, or panels,suitable for which wall thickness below 4 mm. | corrosion resistant ductility at high temperatures, and low magnetic permeability. | Includes a body, gasket, and locking nut.

The exact ID is 8 mm | Made of 304 Stainless Steel, corrosion resistant.One pack contains 110 pieces flat washer. | These washers help to prevent bolts or nuts from pulling through a surface. | Ideal for increasing the load bearing surface under a fastener's head by distributing the load through the washer. | Tips: The pack of flat washer may contain some tiny devices components. Please place it out of the reach of children.

Material: Brass. Connections: 5/16" x 3/16 | Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Temperatures range from -40 to 160 F. 150 PSI maximum working pressure | Contains no lead. NOT FOR POTABLE WATER

Material: Brass. Connections: 5/16" x 3/16" | Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter | Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability | Temperatures range from -40 to 160 F. 150 PSI maximum working pressure | Contains no lead. NOT FOR POTABLE WATER

Material: 316 Stainless steel. | Size: 1/2" Male x 1/2" Female. | Double-seal system allows flow to go in either direction, heavy duty Stainless Steel handles. | Used as shut-off valve or water saving adjustable valve. | On/off switch with quarter-turn easy operation.

PU Tubing Pipe Material: PU( Polyurethane ) | PU Tubing Pipe Size: 1/4" (Inside diameter) , Package Total Length:32.8 Feet (10meters) | PU Tubing Pipe Compression-Resistant : 0.8MPa(8.5kgf/cm2); Tensile Stress: 550kg/cm2; Use Range: Pneumatic Tools | Tubing Pipe Working Temperature: -40 -176 ℉/-20℃--80℃; Working Pressure: 1Mpa; Burst Pressure: 2.5Mpa; Stretch Resistance: 400kg/cm2; Anti-abrasion: 35mg; Resistant to Oils With No Corrosive | Tubing Pipe Features: Excellent flexibility, Small bending radius; Good shock resistant; Wide range for working temperature and pressure; Excellent chemical properties, Minimal pressure loss; Constant hardness,Long service life; Non-toxic, Tasteless

【Model】 SAE J 844 Nlylon Tubing DOT Approved - Black | 【Size】3/8"OD（12.7mm).Length:32.8ft (10 Meter) | 【Working Pressure】2.5Mpa (362PSI). Burst Pressure 6Mpa (870PSI) | 【Working Temperature】 -22℉-140℉ | 【Usage】Air brake system,air or fluid transfer use with brake hose fitting

Material: 304 Stainless Steel. | Type: Female NPT to Barb Hose Fittings | Size: 3/4" Female x 1" Barb | Operating temperature: range from -65 to 250 degrees F. | Barbed retracting locks for easy slide-back connecting and disconnecting.

Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. | Size: 5/16”Barb x 5/16”Barb x 5/16”Barb – 8mm Barb x 8mm Barb x 8mm Barb. | Fitting connects to hose on all ends. | Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately). | Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. | Type: 1/2" NPT x 1/2" NPT Male thread, 12" style is about 300 mm length. | Operating temperature: range from -65 to 250 degrees F. | Widely use: Pipe threads connect to common pipes and easy to replace and install. | Durable: It is a good choice for laying pipes in home buildings, and it is not easy to damage after long-term use.

This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials. | NPT thread for creating tighter seals than straight threads. | Made of 304 stainless steel, strength and resistance to corrosion. | Temperature range from -30 to +150 degrees F. | Maximum working pressure of 150 psi.

This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials. | NPT thread for creating tighter seals than straight threads. | Made of 304 stainless steel, strength and resistance to corrosion. | Temperature range from -30 to +150 degrees F. | Maximum working pressure of 150 psi.

This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials. | NPT thread for creating tighter seals than straight threads. | Made of 304 stainless steel, strength and resistance to corrosion. | Temperature range from -30 to +150 degrees F. | Maximum working pressure of 150 psi.

This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials. | NPT thread for creating tighter seals than straight threads. | Made of 304 stainless steel, strength and resistance to corrosion. | Temperature range from -30 to +150 degrees F. | Maximum working pressure of 150 psi.

Hose ID: 3/8" to 1/4" | Made of 304 stainless steel, strength and resistance to corrosion. | Reducing Union coupling for connecting two hoses with different diameter in a straight run. | Temperature range from -30 to +150 degrees F;Maximum working pressure of 150 psi. | Barbed retracting locks for easy slide-back connecting and disconnecting.