Adaptive 10/100Mbps network data transmission: This poe splitter compatible with IEEE802.3-AF/AT transport protocol uses six types of all-copper cables for real-time data transmission without jamming | Input Power Voltage: Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance DC44-57V from poe switch or poe injector, deliver power up to about 100m (328 feet).The maximum power consumption is 15.4W, and the POE input voltage range is 48V-57V. 5.5x2.1mm DC Plug Cable. DC Jack(Male) output DC voltage is 12V and the maximum output DC current is 1.2A | Plug-and-Play - Require no configuration: A simple solution to expand your network to where you wish to place network devices but has no power outlet, powerline ethernet adapter | Easy to install and operate: Any device which connects to a network via an ethernet cable,needs only one cable connection to power and operate if you use PoE.POE makes installation simpler and less expensive, helps to scaling up networks and adding new connections and devices. POE splitter can make non-POE device works via POE.Say goodbye to the wiring annoyance of multiple lines by simply connecting one network cable to transmit data and power at the same time | Typical application areas include malls, hospitals, companies, parking lots, urban streets, residential buildings, etc. M2C mode sales, the powerful production capacity of background factories, while ensuring capacity and quality, directly give the buyer (consumers), so that the buyer can buy high performance-price ratio products, so that the buyer can buy with confidence

Used for 10/100Mbps networking, easily connect any POE supported device to a non-PoE LAN switch port, Used to connect a wireless access point, IP phone, network camera, or any POE powered device to a LAN switch. | Save you money by using an existing Ethernet line to deliver data and power, reduce Wiring Costs by powering devices through your existing Ethernet line rather than running new AC power lines | You need to do is connect this Bawofu 48V 24W 0.5A PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device | Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems | It is also protect your products from overloads over 500mA and high voltages exceeding 50Vdc, it meet the IEEE802.3 network line power standard, with short circuit, overcurrent and overvoltage protection, safe use