☑ Compact but Durable: a folded length of 24.01", weighing only 2.4 lb and max load 13.2 lb , This monopod is ideal for travel and outdoor shooting. | ☑Detachable Design: 4 section design allows for flexibility in use. removable tripod stand provide 3 options: 1) Fixed video monopod with adjustable feet, 2) Portable monopod, 3) Low angle camera pod for a variety of uses. | ☑Aluminum leg in 4 sections with flip locks enable fast and fumble-free set-up. Extend to 66.92 inches. using a supplied Y-style key, the user can tighten the screw on each spring-loaded flip lock to safeguard their continued reliable performance. | ☑Pivoting Tripod: The monopod base enables 360° swiveling, 90° tilting in all directions and allows easy switches from landscape to portrait modes. | ☑Telescopic design: 24.01 inches to 66.92 inches. Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 13.2lbs. Premium materials with Aluminum, more max load weight. 6-Year Warranty |Please don't leave the monopod standing alone but always keep it with your hand.

☑ Compact but Durable: a folded length of 24.01", weighing only 2 lb and max load 13.2 lb , This monopod is ideal for travel and outdoor shooting. | ☑Detachable Design: 4 section design allows for flexibility in use. removable tripod stand provide 3 options: 1) Fixed video monopod with adjustable feet, 2) Portable monopod, 3) Low angle camera pod for a variety of uses. | ☑Carbon Fiber leg in 4 sections with flip locks enable fast and fumble-free set-up. Extend to 66.92 inches. using a supplied Y-style key, the user can tighten the screw on each spring-loaded flip lock to safeguard their continued reliable performance. | ☑Pivoting Tripod: The monopod base enables 360° swiveling, 90° tilting in all directions and allows easy switches from landscape to portrait modes. | ☑Telescopic design: 24.01 inches to 66.92 inches. Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 13.2lbs. Premium materials with Carbon Fiber more lightweight, more max load weight. 6-Year Warranty |Please don't leave the monopod standing alone but always keep it with your hand.

☑Multi-function: Not only a monopod for cameras, but also act as a walking stick for outdoor use.Ideal for sport interview, travel photography, extreme sports and so on. | ☑ Lightweight Carbon Fiber design: Collapses down to a very compact 16.53” and weighs just 1.1 LBS. Fits neatly into a carry-on or a tote bag and is lightweight enough to stow away in a backpack on a hike with no regrets.Leg locking system offer an adjustable height range of 16.53" (42cm) to 58.66" (149cm). | ☑Material: 5 sections leg with durable Carbon Fiber body, adds up to durability factor along with its benefit of a lightweight structure. | ☑COMFORTABLE GRIP: Features a soft foam grip and safety wrist strap. It’s the ideal stabilizing solution for capturing sharp images and smooth video. | ☑SAFE AND SECURE: Built-in non-skid rubber foot with retractable leg spike, making it perfect for indoor and outdoor terrain.

☑Lightweight & Compact:Supporting loads up to 13.2 lbs, folded to 27.55", good for travel and hiking | ☑Fluid head with removable pan bar, gives you smooth shot horizontally and vertically | ☑Carbon Fiber leg in 4 sections with flip locks enable fast and fumble-free set-up. Extend to 71.25 inches.using a supplied Y-style key, the user can tighten the screw on each spring-loaded flip lock to safeguard their continued reliable performance | ☑The collapsible 3 feet support base featured with patent vertical lock knob, allowing the monopod to incline 15° and revolve 360° around the fulcrum | ☑Adjustable height: 27.55" to 71.25" | Tilt range: -50° to +90° | Pan range: 360° | Max Load: 13.2 lbs | 6-Year Warranty |Please don't leave the monopod standing alone but always keep it with your hand

【Compact and Portable】 Measuring only 2.75"/70mm in height, this compact fluid head is lightweight (0.55lbs/0.25KG) and has a 1.77"/45mm diameter base. Including all knobs, the entire tripod fluid head boasts an all-metal design, with a textured feel and is more durable. | 【360° Panoramic Rotation & -45°to 90° Tilting】 The fluid head provides smooth movements and fixed friction damping. Equipped with the aluminum alloy tilt locking knob, pan locking knob, and the handle, you can easily rotate the head 360° or tilt it from -45° to 90°. Perfect for multiple angles photography. | 【Quick Release Plate with 1/4" Screw】 The quick release plate compatible with Arca Swiss is easy to install and remove. Attach the plate to your camera and quickly mount it on a tripod if needed. Equipped with an larger area of non slip rubber pad and two fall prevention screws on either side to ensure your equipment is mounted securely. | 【Detachable Handle】 Use the included L shape Hex key to detach and install the handle for left hand or right hand operating. And it is magnetically attached to the fluid head for easy removal. | 【Wide Compatibility】 Compatible with digital SLR cameras, mirrorless cameras, compact video cameras, and more. The maximum load capacity of the fluid head is 6.6lb/3kg.

360 Degree Swivel: Equipped with 3 knobs for adjustment, you are able to set your camera at different angle | Comes with 3/8'' Bottom Screw Thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing | 1/4" quick shoe plate; Easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position | With Fine Tuning Damping to protect your device from sudden plunge while doing versatile angle shooting | The base with index marking to indicate more precise control. Note: Tripod head Only; Camera and tripod are not included

【Premium Fluid Drag Pan Head】 Exceptionally robust, this professional fluid drag pan head with built in damping and balancing system is made of premium aluminum alloy that can withstand harsh outdoor environments and offer a maximum load capacity of 22lb (10kg) - perfect for taking sharp images and smooth videos. | 【Quick and Easy Modes Switching】 The fluid head has two QR modes, compatible with DJI RS2 RS3 RS3 PRO gimbal and Manfrotto 501PL quick release plates respectively. Compared to the traditional slide in structure, you can press the quick release plate directly from the top of the fluid head and lock it in 1s, as well as quickly release the plate via the side release button, more efficient and convenient to switch between tripod and gimbal shooting. | 【Smooth Panoramic Movement】 The pan base with 360° scale allows you to capture spectacular panoramic images with fluidity and precision. Two Rosette mounts allow you to install the drag handle on both sides and pan the fluid head with either hand. Additionally, a handy bubble level helps you keep the level straight all the time, and the telescopic handle is easy to use and store Example: Breathable leather lining. | 【Easy & Safe Angle Adjustment】 With -85°/+90° counterbalanced tilt adjustment, this tripod head lets you photograph at any angle, whether it’s low angle, overhead, vertical, or horizontal. Once you find the perfect position, tighten the locking knob to secure the tripod head in place. | 【Universal Mounting Threads】 The 1/4" and 3/8" top mounting screws are available for a variety of camcorders, DSLR cameras, mirrorless cameras, cinema cameras, and telescopes. The 3/8" thread and a 3/8" to 1/4" thread adapter on the bottom can be attached to a tripod with a ø75mm bowl base, monopod and camera slider. A hex key stored under the head tightens screws for secure camera mounting.

2-Section Pan Bar Detachable handle can be installed on the left or right side according to your needs and the safety lock protects your camera from accidents at all times. | Made of all-metal precision CNC and casting technologies, the fluid head is firm and stable,rotates smoothly . Its maximum load is 11 lbs/5 kg while net weight is 1.9 lbs/0.86 kg only. | The fluid damping tripod head with the 1/4" and 3/8" screws on the top can be used to mount the camera and telescope. Bottom base diameter 2.36 in/60 mm,Standard 3/8" screw hole on the bottom (included with a 3/8 inches to 1/4 inch screw adapter) makes it suitable for all tripods, monopods, light stands and camera sliders. | PLEASE NOTE: Compatible with Manfrotto 501HDV release plates，The video fluid head can be rotated 360 degrees smoothly on horizontal, the tilt range is -50°to +90°and the lock is firm, so that you can take photos whatever you want. | Limited 5-Year Warranty | 24-Hour Customer Service| Max Load: 11 lb | Tilt Angle: +90° / -50° | Pan Range: 360 ° | Ball Diameter: 2.36 in/60 mm.