PREMIUM SCRATCH-FREE FOAM WITH EXCLUSIVE PUSH/PULL DESIGN – SnowBuster is made out of soft yet super sturdy foam to ensure absolutely zero scratching on your vehicle. The unique ‘S’ shape design allows you to easily push or pull snow creating extra efficiency and effectiveness for snow removal. Safe for all vehicles – cars, trucks, SUVs, RVs, Marine Boats, House Siding, & more! | PROVEN QUALITY & DURABILITY, NO CHEAPO PLASTIC – Save yourself from the headaches of broken buttons, loose levers, and flimsy handles. Here at Eversprout we only use Proven Materials that are built to last. The pole is made of premium lightweight aluminum for extra sturdiness while the SnowBuster is made of ultra-condensed foam for a scratch free experience. The simple failsafe design of the extension pole and two attachments allows you to easily twist on your unit of choice. | DISCOVER THE EVERSPROUT EXPERIENCE – 1 YEAR WARRANTY, MIND-BLOWING USA CUSTOMER SERVICE, 1 TREE PLANTED WITH EVERY ORDER – When’s the last time you had a shopping experience that ‘Wowed’ you? Here at Eversprout we match amazing products with an incredible customer experience. | CONVENIENT SIZE FOR EASY STORAGE - All parts in the kit are under 18 inches in length. Easily disassemble and keep in your car wherever is convenient! | THE ULTIMATE EXTENSION POLE ON THE MARKET TODAY – Ultra Lightweight Aluminum pole weighs less than a pound and is extremely sturdy. Non-Slip Foam Hand Grips for comfort and reliable grip in wet conditions. Frustration Free Flip-Tab Locking Mechanism means NO SECTIONS GETTING STUCK like traditional twist-lock poles, AND allows any custom length between 1.5 and 3 ft. 3/4” Acme Thread Pole Tip is made of metal alloy for durability – works with any Eversprout Attachment with over 10x possible uses.

ID: 1/2inch (13mm),OD: 0.75inch(19mm).Material: NBR. | Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 4.7inch(120mm). | Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 25ft 1/2inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.

ID: 1/2inch (13mm),OD: 0.75inch(19mm).Material: NBR. | Working Pressure: 217psi. Max Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 4.7inch(120mm). | Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 5ft 1/2inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.

ID: 1/4inch (6mm);OD: 0.47inch(12mm).Material: NBR. | Working pressure: 200psi.Max working pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 2.36inch(60mm). | Applicable Medium: 1/4 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling, steam emission,please check the pressure of application before perchase. | EVIL ENERGY provide 10ft 1/4inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message.

ID: 1/4inch (6mm);OD: 0.47inch(12mm).Material: NBR. | Working pressure: 200psi.Max working pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 2.36inch(60mm). | Applicable Medium: 1/4 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase. | EVIL ENERGY provide 5ft 1/4inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

The female AN10 45 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 10AN 45 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications. | 10AN PTFE Fuel Injection Fuel Line Length: 20 feet(6M). Inner Diameter: 1/2" (12.95mm). Outside Diameter: 0.66in (16.9mm). Please measure before purchase! Fit for 10AN PTFE hose end fitting ONLY. | Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi. 5/8" AN-10 nylon and stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances. | PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant. | PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

The female AN10 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 10AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided CPE fuel hose. They are not compatible with PTFE hose, E85, rubber hose. | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 10AN is 7/8-14 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

Size: AN10 to 1/2" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN10 to 3/4" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: AN10 to 3/8" NPT, the thread size of 10AN is 7/8-14 UNF. | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

APPLICATION- EVIL ENERGY push lock fitting is widely used in Oil/ Water/ Fluid/ Airline etc. Connect engine with air filter, the engine with radiator system, automobile air conditioning system, oil cooler etc.Our Push Lock fitting is only work with Rubber Push-Lock oil hose. They are not compatible with PTFE Hose, Nylon Braided Hose, or Stainless Steel Braided Hose. | Multi Sizes Supplied:Available in 3 sizes and four angles:6AN,8AN,10AN/straight, 45 degree, 90 degree, 180 degree.(PUSH LOCK FITTING NO INSTALLATION INSTRUCTIONS,detailed Installation steps look described in detail.) | Designed For Smooth Flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength. Polished and anodized surface provide the bright appearance and corrosion protection. | ENVIRONMENTAL FRIENDLY- push lock fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality material which makes push lock fitting worked last for long. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Push Lock fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to make it easier.

[Size] 10AN to 5/8 inch barb, and thread size of 10an is 7/8-14UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. | 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose . | These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place. | Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

Size: 10AN flare to 1/2" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 10AN flare to 3/4" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

Size: 10AN flare to 3/8" NPT, the thread size of 10AN is 7/8-14 UNF, Degree: 90 degree elbow | Material: Made of aluminum alloy 6061-T6, anodized black surface. | Sealing：The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered thread. | Application: Widely used in fuel systems, cooling systems, power steering systems, etc. | Notice: To ensure no leakage at the NPT end, sealant or PTFE tape is strongly recommended. Easy installation and removal with wrench.

[Size] The thread size of 12AN is 1 1/16-12 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] The thread size of 12AN is 1 1/16-12 UNF. The AN side is sealed by a 37 degree angle. | [Application] The swivel fitting is only work with stainless braided and nylon braided hose . | [Material] Made of aluminum alloy 6061-T6. | [Parameter] Max Working Pressure: 1500PSI. Working Temperature Range: -40℉ to 248℉ (-40℃ to 120℃). | [Feature] 360° Swivel design for easy assembly. It can be reused and recycle.

[Size] 12AN to 3/4 inch barb, and thread size of 12an is 1-1/16-12 UNF. | [Application] The barb fitting only work with rubber fuel line. | [Parameter] Max working pressure: 1500PSI; Temperature range: -40℉ to 248℉. | [Material] Made of aluminum alloy 6061-T6. | [Installation] Easy to install, it is recommended to use clamps to enhance sealing.

Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation. | Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included. | Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space. | Size:10AN 16Row oil cooler,Oil Capacity:0.39L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy. | EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message.

Joins 2" OD pipe to 2" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. | Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware. | The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes. | EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

Joins 2.0" OD pipe to 2.0" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 2.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 inch exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 2.25" OD pipe to 2.25" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 2.25" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/4 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Size: Joins 2.25" OD pipe to 2.25" OD pipe, width of strap: 3inch/76.2mm. | Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair. | Advantages: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Joins 2.5" OD pipe to 2.5" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 2.5" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/2 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Size: Joins 2.5" OD pipe to 2.5" OD pipe, width of strap: 3inch /76.2mm. | Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair. | Advantages: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Size: Joins 2.5" OD pipe to 2.5" OD pipe, width of strap: 3inch/76.2mm. | Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair. | Advantages: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Joins 2.75" OD pipe to 2.75" OD pipe, besides, we offer you 7 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). | Application: Butt joint band 2.75" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 3/4 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Joins 3.0" OD pipe to 3.0" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. | Application: Butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. | Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 3 inch exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. | Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. | Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm. | Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair. | Advantages: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch/76.2mm. | Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair. | Advantages: No welding design, easy to install or remove. | Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block. | Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.

ID: 3/16inch (5mm),OD: 0.43inch(11mm).Material: NBR. | Working Pressure: 300psi. Burst Pressure: 1200psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 1.96inch(50mm). | Applicable Medium: 3/16 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc. | Application: SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, please check the pressure of application before perchase. | EVIL ENERGY provide 25ft 3/16inch fuel hose 3-month warranty.Any problem you might have, please feel free to contact us via Amazon message.