Note?
This product is 100% loaded into the clean water test in the production process. If water drops are found in the product, water mist is a normal phenomenon..
Suggest?
Because the concentration of the washing liquid such as shampoo, hair lotion, body wash and hand soap in different regions is different, if the concentration of the above washing liquid is too concentrated, it is strongly recommended to first put the soap dispenser into the water to press the normal water. After that, you can pour off the remaining water and then fill in the required washing liquid. Because this dispenser is not fit for thick conditioner, shampoo and etc.
Specification:
Material: ABS Plastic
Dimension: 20x21.5x7.5 cm / 7.88x8.47x2.93"
Dimension of one soap dispenser: 6.5x21.5x7.5 / 2.56x8.47x2.93"
Capacity: 350ml of each
Output: 1ml
Instructions? (1). Rotate the lock on the cap with the key provided counterclockwise and remove the cap.
(2). Squeeze the back side of the bottle and the bottom plate buckle, and use the other hand to push the bottle up to remove the bottle.
(3). Using the mounting base plate as a template, mark the drilling position mark on the wall with a pen, then drill a 6mm hole in the mark, and then insert it with the supplied rubber plug, and fix the mounting base plate to the wall with screws.
(4). Install the bottle in the direction of the arrow, pour the required liquid, cover the bottle cap, and use the lock to use it. When there is air in the pump head for the first time, please press it several times until the liquid is discharged.
Package included:
3x Soap dispenser
1x Back plate for 3 soap dispenser
2x Keys
4x Screw set