The Aputure MC is Aputure's first RGBWW film light.HSI color control and a CCT range of 3200K-6500K,CRI and TLCI scores of 96+, and SSI scores of 84 in tungsten and 74 in daylight. With 360¡ã of hue and 100 levels of saturation adjustment. | Unlike traditional RGB, the Aputure MC isn't just a light that relies on Red, Green, and Blue LEDs. By adding two additional white LEDs ¡ª one balanced at tungsten and a second at daylight ¡ª the Aputure MC is an impossibly small light that competes with industry giants. | As the first RGBWW light to be compatible with the Sidus Link mobile app, the true abilities of both the light and the app are finally unlocked. | In the MC's FX mode, toggle between any of the MC's nine built-in lighting effects presets to help you out in a pinch. If you need more control over your lighting effects, the Sidus Link app will allow you to adjust all of the effects¡¯ parameters. Lighting effects include: Paparazzi, Fireworks, Faulty bulb, Lightning, TV, Pulsing, Fire, Party, Cop Car. | On top of that, the built-in magnets and footprint roughly the size of a credit card allow this mini RGB light to fit anywhere you could ever need. The MC also features USB-C PD and Qi wireless charging, so it's always ready to go.

Bowens Holder | Four wings | Steel plates

🏆【Impeccable Color Fidelity】: With CRI and TLCI scores of 96+, a tungsten SSI score of up to 85, and a D55 SSI score of up to 74, the 300x will always provide you with top of the line, accurate color reproduction, 5500k color temp matches the sun and blend seamlessly as white light for natural look. | 🏆【Bi-color 2700K-6500K】: The 300x is the first of many Aputure lights to utilize the expanded vari-white CCT range of 2700K-6500K, going beyond traditional bi-color, allowing you to produce light that is warmer than typical tungsten fixtures, and cooler than conventional daylight (D55). | 🏆【Dual Output Modes】: The 300x even features two output modes: Max Output and Constant Output mode. In Constant Output mode, you can change your CCT precisely while maintaining a consistent luminance level. Combined with a new, smoother dimming system, you even gain the ability to seamlessly shift your color temperature in the middle of a scene. In Max Output mode, however, the 300x will always maximize your output for your CCT and dimming level, with the highest output range being 4000K-5500K. | 🏆【Upgrade Control Box with Quick and Precise CCT Control】: The LS300X updated the control box featuring a new CCT control wheel. The 300x CCT dial allows you to fine-tune your CCT in +/- 50K increments. But with the PRESET button located in the middle of the wheel, you can also toggle between 5 common CCT presets (2700K, 3200K, 4300K, 5500K, 6500K) for quick accessibility. | 🏆【Multi Control Supported & 9 Pre-programmed Lighting Effects】: LS 300X supports controlling lights in multiple control methods, like the control box, 2.4G RF remote, DMX 512, as well as by the Bluetooth Mesh Sidus Link App. The 300x also launches with 9 built-in lighting FX in the control box, such as “Paparazzi” “Fireworks” “Lightning” “Faulty Bulb” “TV” “Pulsing” “Strobe” “Explosion” and “Fire”, all with adjustable color temperature.

【Impeccable Color Fidelity】CRI 96+ TLCI 99+ Offers Natural, Pristine Color for Broadcast Video, Photography, Television Production and Studio Filmmaking; Color Temperature of 5600K, allowing you to produce light that is cooler than conventional daylight. | 【Sidus Link Control】The 100d S can be controlled wirelessly via the Sidus Link app, granting it access to 8lightingeffects,includingPaparazzi,Fireworks,Lightning,Faulty Bulb,TV,Pulse,Strobe,and Explosion. | 【Ultra Silent Fan】Come with silent cooling system,the light remains cool no matter how long your shoot goes on.And maximum noise value is less than 25 dB to show its excellent noise immunity. | 【Versatile Power Supply Methods】48V DC power input grants the 100dS with the flexibility of battery power using two Gold or V-Mount batteries with the Aputure 2-Bay Battery.Power Station*, providing versatile power options for seamless workflowsacrossall shootingenvironments. | 【Bowens mount】The 100ds Equipped with soft light umbrella hole, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount.

Upgraded High SSI LED Design: SSI (Tungsten): 89+, SSI (D56): 87+ - Significantly Improved Spectral Continuity and Light Quality | Impeccable Color Fidelity & Flexible Bi-Color Range: CRI: 95+, TLCI: 97+, TM-30 Rf: 96, TM-30 Rg: 102, Pristine Color for Broadcast Video, Photography, Television Production and Studio Filmmaking; CCT 2700K-6500K | Dual Control Methods: The Aputure 100xS support 2.4G 100m Sidus Link App Remote Control via Bluetooth, to control all kinds of light effect, brightness, frequency. You can also adjust the brightness from 0-100% On-board | Dual Power Supply Methods: The amaran 100x S is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries (DC 48V input) when AC power is unavailable. | Bowen’s Mount & Umbrella Hole Design: The 100x S equipped with soft light umbrella hole, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount. | 9 Pre-programmed Lighting Effects: Aputure amaran 100xS features 9 lighting effect modes, such as paparazzi, fireworks, lightning, faulty bulb, TV, breath, flash, explosion, fire. Brightness 0-100% adjustable, providing more choices.

➤ Upgraded High SSI LED Design: SSI (Tungsten):90+, SSI (D56): 89+ - Significantly Improved Spectral Continuity and Light Quality | ➤ Immaculate color quality: CRI: 95+, TLCI: 98+, TM-30 Rf: 97, TM-30 Rg: 101, Pristine Color for Broadcast Video, Photography, Television Production and Studio Filmmaking; Color Temperature range of 2700K-6500K. | ➤ Dual Control Methods: The Aputure 200x S support 2.4G Sidus Link App Remote Control via Bluetooth, to control all kinds of light effect, brightness, frequency,80m Wireless Remote Control. You can adjust the brightness from 0-100% On-board. | ➤ AC & Battery Power Options: amaran 200x S is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries (DC 48V input) when AC power is unavailable. | ➤ 9 Built-in Lighting FX Lighting Effects: Aputure amaran 200X S features 9 lighting effect modes, such as Paparazzi, Fireworks, Lightning,Faulty Bulb, TV, Pulsing, Strobe, Explosion, & Fire. Brightness 0-100% adjustable, providing more choices. | ➤ Bowen’s Mount & Umbrella Hole Design: amaran 200x S Light equipped with soft light umbrella hole, and a Bowens reflector mount for access to amaran light shapers and also those many other manufacturers that use this popular mount.

amaran Spotlight SE 36º Lenses Compact Bowens Mount Projection Lens suitable for amaran 150c,amaran 300c,amaran 200xS,amaran 60xS Series. | Transform Bowens Mount Point-Source Fixtures Into Spotlight Projectors | Includes 15 M-Sized Gobo Inserts for Unique Light Projection Shapes | Custom Precision Optics | Quick Focus Adjustments | Even Edge-to-Edge Light Distribution | Durable All-Metal Construction | 18-Leaf Iris Accessory Sold Separately | Compatible with Bowens Mount Point-Source Fixtures Up to 300W

EASILY SHAPE LIGHT: To complement the use of the Spotlight Mount Kit, the first professional-grade Bowens Mount projection attachment, Aputure has created a 10-piece GOBO Kit. | SIMPLE YET EFFECTIVE : With these B-Size Gobos, filmmakers can easily add more creative designs to their Spotlight Mount arsenal. | CLASSIC SHAPES: Ten GOBO shapes included: "Fireworks," "Linear," "Dot," "Church Window," "Modern Window," "Fire," "Scatter," "Lightning," "Ripple," and "Grille."

Aputure Amaran 200x S CRI: 95+, TLCI: 98+, TM-30 Rf: 97, TM-30 Rg: 101, Pristine Color for Broadcast Video, Photography, Television Production and Studio Filmmaking; Color Temperature range of 2700K-6500K. | The Aputure amaran 200x S features an all-new dual-blue LED chipset design, dramatically improving its ability to reproduce the light spectrum, resulting in best-in-class color accuracy with a 89 in daylight SSI and 90 in Tungsten SSI . | Equipped with a universal Bowens Mount, the 200x S is compatible with the largest selection of modifiers on the market, including the Light Dome SE, Light Dome Mini II, and Aputure Lantern. | The Aputure Amaran 200x S ensures accurate skin tone reproduction with industry-leading color quality, and can easily fill the room with high quality light. oth warm to daylight lighting possibilities. | The Aputure Amaran 200x S can be controlled wirelessly via the Sidus Link Bluetooth app. Fine-tune an extensive range of lighting settings, control multiple lights in a scene to enhance any lighting design, or activate 9 light effects such as Paparazzi, Fireworks, Faulty Bulb, TV, Pulse, Strobe, Explosion, and Fire using integrated Sidus Mesh technology.

The amaran 300c is amaran’s first-ever full-color 300W Bowens Mount point-source LED light, combining RGBWW full-color control, optical and soft light Bowens Mount versatility, integrated controls, and most importantly, high-quality light output. | Bi-color CCT range of 2,500K to 7,500K with green-magenta adjustment and 360° HSI color control with >90% coverage of the Rec.2020 Color Space. And with high CRI/TLCI [95+], SSI (D56) [71], and SSI (Tungsten) [83] scores | The amaran 300c also punches well above its weight class, outputting 26,580 lux (5600K) using the included Hyper Reflector combined with 0-100% dimming control. | Using Sidus Mesh technology, the amaran 300c can be controlled wirelessly. The Sidus Link App can help match colors perfectly with Color Picker and activate 9 System FX including Party Lights, Cop Car, Paparazzi, Fireworks, Lightning, Faulty Bulb, TV, Explosion, Fire, Pulsing, and Strobe. | With its 48V DC power input the 150c can freely switch between the AC adapter for studio shoots or the flexibility of battery power using with the Aputure 2-Bay Battery Power Station(not include battery)

🍀【Upgraded High SSI LED Daylight】The amaran COB 60d S is an all-new ultra-compact 65W daylight Bowens Mount point-source light with an upgraded LED chipset, bringing incredibly high color quality to the upgraded amaran COB S series. With increased CRI [96], TLCI [99], TM-30 RF [96], and TM-30 RG [100] scores, the latest LED technology brings a significant color upgrade to the amaran family and rivals some of the highest-end lighting fixtures on the market | 🍀【Easy to Carry】The aputure amaran COB 60d S is an ultra-compact bi-color LED video light with surprising output and full Bowens Mount versatility. The 60d S is as compact as a camera, weighing in at a featherweight 695 grams , with dimensions just over 11x11x11cm (4x4x4 inches) | 🍀【Universal Accessory Mount】The aputure amaran 60d s accessory mount is compatible with a wide variety of Bowens Mount soft light modifiers, including the Aputure Light Dome SE, Light Dome Mini II, Light box 4545 & Lantern(Sold Separately). The maximum load≤ 2.5kg. In addition to the Bowens Mount, the amaran 60d's stand adapter also has an umbrella holder for even faster speed and softness | 🍀【8 Built-in Lighting FX】The aputure amaran 60d S also launches with 8 built-in lighting FX, such as Paparazzi, Fireworks, Lightning, Faulty Bulb, TV, Pulse, Strobe, and Explosion using integrated Sidus Mesh technology | 🍀【AC / DC Power Supply】 D-Tap Battery Compatible(D-Tap Power Cable (DC 5.5mm) Sold Separately). The variety of power solutions the amaran COB 60 series has access to makes it suitable for shooting anywhere, as long as you have NP-F or D-Tap batteries. Package included aputure amaran 60d s light body, Dual NP-F Battery Plate, Lamp Cap Protection, Bracket, Standard reflector, Power Adapter (3m) and Power Cable (4m) | 🍀【Sidus Link App Control】Lighting should be fun and easy. With the integration of Sidus Mesh, the aputure amaran COB 60d S gives you professional lighting control with a single app, so you can adjust your light without ever having to leave your camera.

Aputure Amaran 60D S 65W DAYLIGHT Led Video Light (Amaran 60D Upgrade Version),improve spectral consistency index and light quality.CCT:5600K,CRI:≥96,TLCI:≥99,CQS:≥95,TM-30 RF (Avg.):96,TM-30 RG (Avg.):100,SSI (D56):86 | Dual Control Methods: The amaran 60D S support 2.4G 100m Sidus Link App Remote Control via Bluetooth, to control all kinds of light effect, brightness, frequency. You can also adjust the brightness from 0-100% On- board. | AC & Battery Power Options: The Amaran 60D S is ready for worldwide use via its built-in 100-240V power supply, but it will also run on optional batteries (DC 48V input) when AC power is unavailable. | 8 Built-in Lighting FX Lighting Effects: Amaran 60D S features 8 lighting effect modes, such as Paparazzi, Fireworks, Lightning,Faulty Bulb, TV, Pulsing, Strobe, Explosion, & Fire. Brightness 0-100% adjustable, providing more choices. | Bowen’s Mount & Umbrella Hole Design: The Amaran 60D S Light equipped with soft light umbrella hole, and a Bowens reflector mount for access to Amaran light shapers and also those many other manufacturers that use this popular mount.

【Upgraded High SSI LED Design】 SSI (D56): 86+,Significantly Improved Spectral Continuity & Light Quality,Increased CRI, TLCI, TM-30 and SSI scores for Super Accurate Color Rendering | 【Compact & Lightweight】With its small stature as compact as a camera,Just Over 11x11x11cm and 695g,perfect light for creating on the move. | 【Universal Accessory Mount】The amaran 60d S integrates a full-size Bowens Mount into its compact form factor, meaning that it can be easily transformed into a hard or soft light. The amaran 60d's accessory mount is compatible with a wide variety of Bowens Mount soft light modifiers, including the Aputure Light Dome SE, Light Dome Mini II, Light box 4545,& Lantern. In addition to the Bowens Mount, the amaran 60d's stand adapter also has an umbrella holder for even faster speed and softness. | 【Power Solutions】Included Dual NP-F Battery Plate, D-Tap Battery Compatible [D-Tap Power Cable (DC 5.5mm) Sold Separately*]. The variety of power solutions the amaran COB 60 series has access to makes it suitable for shooting anywhere, as long as you have NP-F or D-Tap batteries. | 【8 Built-in Lighting FX】The amaran 60d also launches with 8 built-in lighting FX, such as Paparazzi, Fireworks, Lightning, Faulty Bulb, TV, Pulsing, Strobe, and Explosion, -- opening up new possibilities for precise lighting control. | 【Sidus Link App Control】Lighting should be fun and easy. With the integration of Sidus Mesh, the amaran COB 60d S gives you professional lighting control with a single app, so you can adjust your light without ever having to leave your camera.

【Upgraded High SSI LED Design】 SSI (D56): 86+,Significantly Improved Spectral Continuity & Light Quality,Increased CRI, TLCI, TM-30 and SSI scores for Super Accurate Color Rendering | 【Compact & Lightweight】With its small stature as compact as a camera,Just Over 11x11x11cm and 695g,perfect light for creating on the move. | 【Universal Accessory Mount】The amaran 60d S integrates a full-size Bowens Mount into its compact form factor, meaning that it can be easily transformed into a hard or soft light. The amaran 60d's accessory mount is compatible with a wide variety of Bowens Mount soft light modifiers, including the Aputure Light Dome SE, Light Dome Mini II, Light box 4545,& Lantern. In addition to the Bowens Mount, the amaran 60d's stand adapter also has an umbrella holder for even faster speed and softness. | 【Power Solutions】Included Dual NP-F Battery Plate, D-Tap Battery Compatible [D-Tap Power Cable (DC 5.5mm) Sold Separately*]. The variety of power solutions the amaran COB 60 series has access to makes it suitable for shooting anywhere, as long as you have NP-F or D-Tap batteries. | 【8 Built-in Lighting FX】The amaran 60d also launches with 8 built-in lighting FX, such as Paparazzi, Fireworks, Lightning, Faulty Bulb, TV, Pulsing, Strobe, and Explosion, -- opening up new possibilities for precise lighting control. | 【Sidus Link App Control】Lighting should be fun and easy. With the integration of Sidus Mesh, the amaran COB 60d S gives you professional lighting control with a single app, so you can adjust your light without ever having to leave your camera.

🏆【High SSI LED BI-COLOR LIGHT】Aputure Amaran 60X S Bi-Color 65w LED Video Light CRI 96+ TLCI 96+,CCT 2700K-6500K (Amaran 60X Upgrade Version),improve spectral consistency index and light quality.CCT:2700K~6500K,CRI:≥96,TLCI:≥97,CQS:≥95,SSI (Tungsten):90,SSI (D56):87,TM-30 RF (Avg.):96,TM-30 RG (Avg.):100 | 🏆【Dual Power Suppoert】Aputure Amaran 60x S Supports AC Power, NP-F970 Dual Battery Box, and V-Mount Battery Power Supply, Built-In V-Mount Buckle for Quick Battery Installation/Removal, can Be Used with Handheld Bracket for Convenience (NOT INCLUDE BATTERY). Widely used for photograhy,video,Portrait, Studio, Interview and Filming. | 🏆【Featherweight 675 grams】Amaran 60X S weighing in at a featherweight 675 grams (1.49 pounds), with dimensions just over 11x11x11cm (4x4x4 inches). The amaran 60d's accessory mount is compatible with a wide variety of Bowens Mount soft light modifiers, including the Aputure Light Dome SE,LIGHT BOX 6090,LIGHT BOX 30120 etc | 🏆【9 Built-in LIGHTING FX】9 Built-in Lighting FX Lighting Effects: Aputure Amaran 60X features 9 lighting effect modes, such as Paparazzi, Fireworks, Lightning,Faulty Bulb, TV, Pulsing, Strobe, Explosion, & Fire. Brightness 0-100% adjustable, providing more choices. | 🏆【Sidus Link App Control 】The Amaran 60XS support 2.4G Sidus Link App Remote Control via Bluetooth, to control all kinds of light effect, brightness, frequency,80m Wireless Remote Control. You can adjust the brightness from 0-100% On-board.

【Upgraded High SSI LED BI-COLOR LIGHT】The amaran COB 60x S is an ultra-compact 60W bi-color Bowens Mount point-source light with a redesigned chipset for increased color quality and spectral reproduction, integrated controls.Bi-Color CCT 2,700K to 6,500K，SSI (Tungsten): 90+, SSI (D56):87+ ,Significantly Improved Spectral Continuity and Light Quality, Increased CRI, TLCI, TM-30 and SSI scores for Super Accurate Color Rendering. | 【ON THE MOVE】The amaran COB 60x S is an ultra-compact bi-color LED video light with surprising output and full Bowens Mount versatility.The 60x S is as compact as a camera, weighing in at a featherweight 695 grams , with dimensions just over 11x11x11cm (4x4x4 inches). | 【UNIVERSAL ACCESSORY MOUNT】The amaran 60x's accessory mount is compatible with a wide variety of Bowens Mount soft light modifiers, including the Aputure Light Dome SE, Light Dome Mini II,Light box 4545 & Lantern. (maximum load≤ 2.5kg) | 【9 Built-in LIGHTING FX】The amaran 60x S also launches with 9 built-in lighting FX, such as Paparazzi, Fireworks, Lightning, Faulty Bulb, TV, Pulsing, Strobe, Explosion, and Fire -- opening up new possibilities for precise lighting control. | 【AC / DC POWER SUPPLY】 D-Tap Battery Compatible [D-Tap Power Cable (DC 5.5mm) Sold Separately*], Included Dual NP-F Battery Plate.

【Any Color, Any Place,Any Time 】The Aputure MC is Aputure's first camera light to include full Hue, Saturation, & Intensity (HSI) color control.Size 93×61x17mm/3.66×2.40x0.67in, With 360° of hue and 100 levels of saturation adjustment, you have the power to conveniently reproduce any color, all in the palm of your hand. With its lightweight, slim profile, you can tuck several MCs in your camera bag or pockets, so you're always ready to go. | 【HSI/CCT/FX Lighting Modes】The Aputure MC allows you to be more flexible in your filmmaking, providing you with multiple lighting modes to suit your needs. In addition to HSI Color Mode, the MC allows you to adjust your white light with CCT Mode, or use built-in lighting effects with FX Mode.Lighting effects include: Paparazzi, Fireworks, Faulty bulb, Lightning, TV, Pulsing, Fire, Party, Cop Car. | 【Stellar Color Quality】As with all Aputure lights, the Aputure MC prides itself in its color rendition, with CRI and TLCI scores of 96+, and SSI scores of 84 in tungsten and 74 in daylight. This is all accomplished by an underlying technology that reproduces color better and more accurately than ever before. | 【Sidus Link Control】The Sidus Mesh technology built into the Aputure MC allows you to control up to 100 lights in a stable network simultaneously via the Sidus Link mobile app. Sidus Link allows for finer control of the light's HSI, CCT, and FX functions by enabling additional control methods and parameters; and the Color Picker supports you to simply point your phone's camera at a color, capture it, and your light will reproduce it instantly. | 【USB Type-C PD Charging & Wireless Charging】Equipped with a USB Type-C charging interface, the MC is the first Aputure light to support the PD (Power Delivery) quick charging protocol. With 18W USB-C PD charging, the MC can reach a full charge in a little over 90 minutes.The MC is compatible with the Qi wireless charging protocol, enabling it to be used with the majority of the wireless chargers on the market. Simply place it on a wireless charging pad and the MC will be ready when you need it.

60W Output Bi-Color Lensed LED Panel: amaran P60X is an expanded bi-color LED panel. Its optical design (45°) allows the P60x to use its 60W bi-color LED chipset to produce high-intensity light output, measuring a staggering 5,070+ lux at 1 meter (5600K) | Beautiful Color Fidelity: Built with the best-in-class LED technology, and precision-designed optics to achieve even color blending and more organic shadow production, the amaran P60x is able to boast impeccable color quality and skin tone reproduction. | Broad CCT Range: The bi-color LED chipset of the amaran P60x gives it the ability to natively adjust its CCT 3200K to 6500K, resulting in an expanded bi-color range that will match the color temperature of nearly an environment you encounter. | Dual Power Supply Methods:The P60x can be operated using the included AC Power Supply or two NP-F Style batteries for over an hour. When connected to AC Power, can also charge NP-F Style batteries, making it the perfect multi-tool for content creators. | Sidus Link APP control & 4 Built-in Lighting FX: using the control knobs or the built-in Sidus Link App integration, users can adjust the CCT. Via Sidus Link app, users can also take advantage of specialized tools such as Source Match and Custom FX.

Ultra-high color rendering index CRI95+, TLCI 97, no flicker; | Adjustable color temperature (3200K-6500K), illuminance up to 5070lux@1m (5600K); | Support Sidus Link APP control, built-in light effect; | Click/rotate the knob to quickly/finely adjust the brightness and color temperature; | The lamp bead layout adopts Brown arrangement, with optical lens, uniform light mixing and strong output; | AC power supply, NP-F970 battery power supply. Can charge the battery, intelligent power display; | Advanced heat dissipation management system, working temperature range -20°C~45°C; | Self-locking power cord and connection line to ensure stable connection of the power supply system; Standard quick-release four-corner soft box, beam light grille; | Aluminum alloy universal connector with soft light umbrella hole, sturdy and durable; | 4 built-in light effects (paparazzi/flash/fireworks/pulse)

Compatible with Bowens Mount Point-Source Fixtures Up to 300W | Transform Bowens Mount Point-Source Fixtures Into Spotlight Projectors | Includes 15 M-Sized Gobo Inserts for Unique Light Projection Shapes | 18-Leaf Iris Accessory Sold Separately

[Cinematic Light Shaping] Designed specifically for Aputure COB lights, the Aputure Barn Doors are the optimal solution for shaping your light and preventing excess spill, featuring four velvet leaves, a newly designed negative reflector dish, and a high quality gel holder. | [Honeycomb] The included 30° honeycomb grid allows filmmakers to further control the direction of their as needed. | [Gel Holder] The Aputure Barndoors also include a magnetic gel holder that allows filmmakers to easily add color to their lights. | [Aircraft Aluminum Build Quality] The four leaves of the Barn doors are made of smooth finish aircraft-grade aluminum to ensure a strong, sleek build that is lightweight and easy to manipulate, while remaining incredibly durable. | [Velvet Fabric] Black velvet fabric maximizes light absorption, allowing for virtually no light leak or bounces. Though maximum light control will be achieved with the included black reflector dish, the 4 leaves can be mounted onto the standard Aputure Silver Reflector Dish or the Aputure Fresnel 2X as well.

[Cinematic Light Shaping] Designed specifically for Aputure COB lights, the Aputure Barn Doors are the optimal solution for shaping your light and preventing excess spill, featuring four velvet leaves, a newly designed negative reflector dish, and a high quality gel holder. | [Honeycomb] The included 30\u200b \u200bhoneycomb grid allows filmmakers to further control the direction of their as needed. | [With 4 Color Filter Gels ] The Aputure Barndoors also include a magnetic gel holder that allows filmmakers to easily add color to their lights. | [Aircraft Aluminum Build Quality] The four leaves of the Barn doors are made of smooth finish aircraft-grade aluminum to ensure a strong, sleek build that is lightweight and easy to manipulate, while remaining incredibly durable. | [Velvet Fabric] Black velvet fabric maximizes light absorption, allowing for virtually no light leak or bounces. Though maximum light control will be achieved with the included black reflector dish, the 4 leaves can be mounted onto the standard Aputure Silver Reflector Dish or the Aputure Fresnel 2X as well.

🌿 |Durable Aircraft Aluminum Design|: The 4 leaves of Aputure Barndoors are Made of Smooth Finish Aluminum to Ensure A Strong, Sleek Build | 🌿 |Standard 7 Inch Bowens Mount|: Bowens Mount for Fast Easy Setup/Disassemble. Black Bowen Mount Adapter Prevents Light Spill | 🌿 |4-leaf Velvet Fabric|: 4 Leaves with An Internal Black Velvet Fabric to Maximize Light Absorption, Allowing for Virtually No Light Leak | 🌿 |Honeycomb + Magnetic Gel Holder|: With A 30° Honeycomb Grid, Filmmakers Can Further Maximize Control as Needed, Easily Add Color to Their Lights | 🌿 |Black Reflector Dish|: Aputure Barndoors Use A Snap-in Mounting Structure, which Makes Installation and Disassembly Quick and Convenient. Cold-rolled Steel Plates for Better Strength, Tighter Tolerance and Smoother Finish

CINEMATIC LIGHT SHAPING：Designed specifically for Aputure COB lights,the optimal solution for shaping your light and preventing excess spill, featuring four velvet leaves, a newly designed negative reflector dish, and a high quality gel holder. | AIRCRAFT ALUMINUM BUILD QUALITY：The four leaves of the Barn doors are made of smooth finish aircraft-grade aluminum to ensure a strong, sleek build that is lightweight and easy to manipulate, while remaining incredibly durable. | VELVET FABRIC：Black velvet fabric maximizes light absorption, allowing for virtually no light leak or bounces. the 4 leaves can be mounted onto the standard Aputure Silver Reflector Dish or the Aputure Fresnel 2X as well. | HONEYCOMB & GEL HOLDER：The included 30° honeycomb grid allows filmmakers to further control the direction of their as needed. The Aputure Barndoors also include a magnetic gel holder that allows filmmakers to easily add color to their lights. | BLACK REFLECTOR DISH : Aputure Barndoors Use A Snap-in Mounting Structure, which Makes Installation and Disassembly Quick and Convenient. Cold-rolled Steel Plates for Better Strength, Tighter Tolerance and Smoother Finish.

🍀【Metal Material】Aputure F10 Barn Doors, All-metal material, black powder coating process, laser engraved logo, no fear of aging discoloration | 🍀【Works with Aputure F10 Fresnel】F10 Barn Doors can be used alone with Aputure F10 Fresnel, or directly on the light through Bowens adapter ring | 🍀【Compatible With】Aputure F10 Barn Doors compatible with 120d, 300d, 300x, 600d, 600x and other aputure lights, also compatible with other brands of Bowens mount lights on the market | 🍀【Bowens Mouth Adapter Ring】Includes Bowens mouth adapter ring with its own metal jaws. Strong and durable | 🍀【8-Leaf barndoor design】Aputure F10 Barn Doors have 8 leaves blocking light, adjustable size. Safety rope design, latch stable and reliable

All-metal material, black powder coating process, laser engraved logo, no fear of aging discoloration. | Can be used alone with F10 Fresnel, or directly on the light through Bowens adapter ring. | Compatible with 120d, 300d, 300x, 600d, 600x and other aputure lights, also compatible with other brands of Bowens mount lights on the market | Includes Bowens mouth adapter ring with its own metal jaws. Strong and durable. | 8 leaves blocking light, adjustable size. Safety rope design, latch stable and reliable.

Aputure F10 Barndoors for Aputure LS 600d | 8-Leaf barndoor design | Drop-in latching attachment system | Compatible with the Aputure F10 Fresnel | Large leaves to sharply cut larger light sources

8-Leaf barndoor design | Drop-inDrop-in latching attachment system latching attachment system | Large leaves to sharply cut larger light sources | Compatible with the Aputure F10 Fresnel | Black reflector dish for sharper shadows

Aputure F10 Barndoors is 8-Leaf barndoor design | Drop-in latching attachment system latching attachment system | Large leaves to sharply cut larger light sources | Compatible with the Aputure F10 Fresnel | Black reflector dish for sharper shadows

2 optical elements

【4X Brightness of Original MC】: New Optical Design with Tighter 45º Beam Angle. CCT from 2,000K to 10,000K ,Fully Tunable Green-Magenta Adjustment.CRI: 96, TLCI: 96, TM-30 Rf (ave.): 94, TM-30 Rg (ave.): 103, SSI (D56): 72, SSI (Tungsten): 82 | 【Weatherproof IP65 】IP65 Dust & Water-Resistant (Weatherproof), In CCT mode, the ultra-wide color temperature adjustment range: 2000K-10000K and supports green/color value fine-tuning. | 【Magnetic Mount】Support Magnetic, and include Magnetic Accessory Mount Flat Diffuser, Dome Diffuser, & 30º Light Control Grid, | 【 Multiple Control Methods】: Sidus Link Bluetooth App Control, DMX/RDM1, LumenRadio CRMX | 【15 Built-In System FX】: Fireworks, Fire, Paparazzi, Faulty Bulb, TV, Pulsing, Cop Car, Lightning, Party Lights etc

7.5W Output Pixel-Mappable RGBWW Mini Tube LED | Fully Tunable CCT from 2,000K to 10,000K | Multiple Control Methods: Sidus Link Bluetooth App Control, DMX/RDM, LumenRadio CRMX | Built-In Lithium-polymer Battery (approx. 120 min. @ Max Power) | Included Carrying Case for Light Fixture, Tripod, and Grid

The MT Pro's 7.5 max output power is able to produce up to 614 lux at 0.5 meters, and is the latest addition to Aputure's full-color family of lights, utilizing the same foundational RGBWW technology as other professional fixtures, including the LS 600c Pro and Nova P600c. | The proprietary chipset produces stunning color quality throughout its wide CCT range of 2,000K to 10,000K with full green-magenta adjustment, and the ability to reproduce >90% of Colors Within Rec.2020 Color Space. The MT Pro will always produce accurate skin tones with Aputure's high standards for colors, measuring at CRI: 95+, TLCI: 98+, SSI (D56): 73, and SSI (Tungsten): 84. | with other advanced features unique to the Aputure and amaran ecosystems, such as Picker FX and Custom FX which can be stored using the Sidus Link app for easy access to different light modes. For full creative freedom, it also features critical color controls | The solid construction of the MT Pro also benefits Aputure’s high standard for build quality, with its lightweight 391g aluminum housing, and built-in USB-C rechargeable battery that can operate the MT Pro at its 7.5W max output for 120 minutes. | left bare for greater lighting coverage and used as an in-camera practical. Alternatively, use the MT Pro's integrated magnets, the included mini tripod, or collapsible 45° light control grid for additional versatility and control across all shooting environments

Combined with the slots on Nova P300c lamp body, users can quickly install and securely fix it to the lamp body due to the restrictive design on the slots. | Equipped with shading tape, can be a good solution to the light body and the light barrier gap light leakage phenomenon. | Aircraft aluminum material, strong and durable. | Includes high-density textile carrying case for easy portability.

Premium Grade for Professional need a long lasting and reliable TTL Connection for the work. | Hot-shoe TTL Connection with a Coiled Cord Length from 2-4ft | 1/4" standard Tripod Thread for Extended Off-Camera TTL Flash Lighting or Hot-Shoe Mountable on Flash Bracket | 24 Month Manufacture Warranty

Sidus Link Bridge - Antenna - Case - Aputure 1 Year Limited Warranty | Allows you to control legacy 2.4GHz Aputure fixtures via the Sidus Link App | Can control Aputure 2.4GHz RF Fixtures up to 100m away | 9 Built-in Lighting FX compatible with legacy wireless Aputure fixtures | SidusPro FX support: Use Picker FX to capture and transmit new effects to legacy Aputure fixtures