Apevia ATX-PR800W Prestige 800W 80 Plus Gold Certified & RoHS Compliance, Active PFC ATX Gaming Power Supply. Comes with 3-year warranty. | Supports Dual/Quad/multi-core CPUs. Supports single 12V output for higher power usage | Dc to DC converter design, provides superior dynamic response, greater system stability and maximizes the 12V DC rail output | Multi-gpu technologies supported; 6 pin and 8 pin PCI-E connectors support all GPU platforms. Built in 1 x auto-thermally controlled black 135mm fan | Connectors: 1 x 20/24pin main power, 1 x 4/8pin 12V, 2 x PCI 6+2pin, 7 x SATA, 4 x peripheral. All protections

APEVIA TFX-AP300W Standard 300W Flex ATX Power Supply | Input Voltage: 115-230V AC, Input Frequency: 60/50 | Output: +3.3@12A; +5A@12A; +12V@20A; [email protected]; [email protected] | 5% Tolerance of 5V, 3.3V & 12V Output | Forced Air Ventilation by 1 x 80mm Fan

Apevia 600W Essence ATX Semi-Modular Gaming Power Supply with white sandblasted casing | Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage. | Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral, 1 x Floppy | Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@45A, [email protected], [email protected] | Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections

1000W 80+ Gold Certified Active PFC ATX Gaming Semi-Modular Power Supply. | Modular Design Supports Cable Management. Connectors: 1 x 20/24pin Main Power, 2 x P8(4+4P) ESP 12V, 4 x SATA + 4 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Single 12V Output for Higher Power Usage | Auto-Thermally Controlled 135mm Black Fan. Output: +3.3V@20A, +5V@20A, [email protected], [email protected], +5Vsb@3A | Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protections. Double Forward Converter Design. | Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. Supports SLI/Crossfire/ Haswell. Large Japanese Capacitor.

650W 80+ Gold Certified Active PFC ATX Gaming Semi-Modular Power Supply. | Modular Design Supports Cable Management. Connectors: 1 x 20/24pin Main Power, 2 x P8(4+4P) ESP 12V, 4 x SATA + 4 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Single 12V Output for Higher Power Usage | Auto-Thermally Controlled 135mm Black Fan. Output: +3.3V@20A, +5V@20A, +12V@66A, [email protected], +5Vsb@3A | Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protections. Double Forward Converter Design. Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. Supports SLI/Crossfire/ Haswell. Large Japanese Capacitor. | The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on. | The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector. | The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector. | The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector.

850W 80+ Gold Certified Active PFC ATX Gaming Semi-Modular Power Supply. | Modular Design Supports Cable Management. Connectors: 1 x 20/24pin Main Power, 2 x P8(4+4P) ESP 12V, 4 x SATA + 4 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Single 12V Output for Higher Power Usage | Auto-Thermally Controlled 135mm Black Fan. Output: +3.3V@20A, +5V@20A, +12V@66A, [email protected], +5Vsb@3A | Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protections. Double Forward Converter Design. | Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. Supports SLI/Crossfire/ Haswell. Large Japanese Capacitor.

Apevia Jupiter ATX-JP600W 600W 80 Plus Bronze Certified ATX Gaming Power Supply. Comes with 3-year warranty. | Connectors: 1 x 20/24pin Main Power, 1 x P8(4+4P) ESP 12V, 4 x SATA + 2 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Supports Single 12V Output for Higher Power Usage | Auto-Thermally Controlled 135mm Black Fan. | Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. All Sleeved Cables. Output: +3.3V@20A, +5V@20A, +12V@44A, [email protected], [email protected] | Double Forward Converter Design. Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protections.

Apevia ATX-JP800W Jupiter 800W 80 Plus Bronze Certified Active PFC ATX Gaming Power Supply. Comes with 3-year warranty. | Connectors: 1 x 20/24pin Main Power, 1 x P8(4+4P) ESP 12V, 4 x SATA + 4 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Supports Single 12V Output for Higher Power Usage. | Auto-Thermally Controlled 135mm Black Fan. Output: +3.3V@20A, +5V@20A, +12V@58A, [email protected], [email protected]. | Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. Supports SLI/Crossfire/ Haswell. All Sleeved Cables. | Double Forward Converter Design. Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protectionss.

650W 80+ Gold Certified Active PFC ATX Gaming Semi-Modular Power Supply. | Modular Design Supports Cable Management. Connectors: 1 x 20/24pin Main Power, 2 x P8(4+4P) ESP 12V, 4 x SATA + 4 x 8(6+2)pin PCI-E, 4 x Peripheral, 1 x Floppy. Single 12V Output for Higher Power Usage | Auto-Thermally Controlled 135mm RGB Fan. Output: +3.3V@20A, +5V@20A, [email protected], [email protected], +5Vsb@3A | Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage Protections. Double Forward Converter Design. | Supports ATX 12V 2.3 Version. Supports Dual/Quad Core CPUs. Supports SLI/Crossfire/ Haswell. Large Japanese Capacitor.

Supports Dual/Quad/multi-core CPUs. Supports single 12V output for higher power usage | Dc to DC converter design, provides superior dynamic response, greater system stability and maximizes the 12V DC rail output | Multi-gpu technologies supported; 6 pin and 8 pin PCI-E connectors support all GPU platforms. Built in 1 x auto-thermally controlled black 135mm fan | Connectors: 1 x 20/24pin main power, 1 x 4/8pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x peripheral. All protections | Apevia ATX-PR600W Prestige 600W 80+ Gold Certified, RoHS Compliance, Active PFC ATX Gaming Power Supply, 3 Year Warranty

Apevia 700W Spirit ATX Gaming Power Supply with black sandblasted casing | Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage. | Connectors: 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral, 1 x Floppy | Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@53A, [email protected], [email protected] | Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections

140mm Black Grill | Stops all size fingers and other intrusions from getting into 140mm fans

Modern metal mid tower with high performance breathable airflow mesh front panel. Plenty of room on the back side to hide and route cables. Comes with easy to remove mesh shield for cleaning. Can fit graphics cards up to 310mm in length and CPU coolers up to 155mm in height. | 6x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode). | Top panel comes with 1 x USB 3.0, 2 x USB 2.0, & HD Audio jacks. Front panel water cooling options: 240mm. Room for up to 2 x 2.5" hard drives and 2 x 3.5" hard drives | Magnetic Dust Filter on the top panel for reducing dust falling into case. Easy to remove dust filter to wash/clean

Modern metal mid tower with high performance breathable airflow mesh front panel. Plenty of room on the back side to hide and route cables. Comes with easy to remove mesh shield for cleaning. Can fit graphics cards up to 310mm in length and CPU coolers up to 155mm in height. | 6x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode). | Top panel comes with 1 x USB 3.0, 2 x USB 2.0, & HD Audio jacks. Front panel water cooling options: 240mm. Room for up to 2 x 2.5" hard drives and 2 x 3.5" hard drives | Magnetic Dust Filter on the top panel for reducing dust falling into case. Easy to remove dust filter to wash/clean

Fully Modular Power Supply: Standard Mini-ITX / FLEX ATX type. Full Range Active PFC 90-264V. Maximum Power: 400W. | Connectors: 1 x 20+4pin Main Power, 1 x 8pin 12V(P4+4), 1x 6+2 PCIE, 2 x SATA, 2 x 4pin Molex | Cooling: Forced Air Ventilation by 1 x 40mm Double Ball Bearing Fan. Various protections including: Overvoltage Protection (OVP), Overload Protection (OLP), Overcurrent Protection (OCP), Heating Protection (OTP), and Short Circuit Protection (SCP) | Dimension: 160mm x 73.66mm x 35.5mm (6.3" x 2.9" x 1.4") - L x W x H | Output: +3.3V@12A, +5V@12A, +12V@28A, [email protected], [email protected] | IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on. | IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector. | IMPORTANT: The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector

Fully Modular Power Supply: Standard Mini-ITX / FLEX ATX type. Full Range Active PFC 90-264V. Maximum Power: 500W. | Connectors: 1 x 20+4pin Main Power, 1 x 8pin 12V(P4+4), 2x 6+2 PCIE, 2 x SATA, 2 x 4pin Molex | Cooling: Forced Air Ventilation by 1 x 40mm Double Ball Bearing Fan. Various protections including: Overvoltage Protection (OVP), Overload Protection (OLP), Overcurrent Protection (OCP), Heating Protection (OTP), and Short Circuit Protection (SCP) | Dimension: 160mm x 73.66mm x 35.5mm (6.3" x 2.9" x 1.4") - L x W x H | Output: +3.3V@12A, +5V@14A, +12V@33A, [email protected], [email protected] | IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on. | IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector. | IMPORTANT: The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector

Performance gaming cube style micro-ATX with dual tempered glass panel for eye-catching visibility of your gaming setup. Plenty of room on the back side to hide and route cables. Matching paint colors from both the exterior/interior of the case. Ventilated metal side panel for increased air circulation | 5x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode). | Can fit graphics cards up to 340mm in length and CPU coolers up to 155mm in height. Top panel comes with 1 x USB 3.0, 2 x USB 2.0, Power button, LED switch button, HDD / Power LED indicators, & HD Audio jacks. Water cooling options: 240mm | Screw in PCI-E Covers (Non-punch out PCI-E Slots) for hassle free GPU installation. Room for up to 2 x 3.5" hard drives or 1x 3.5" hard drive + 1x 2.5" hard drive | Two Magnetic Dust Filters on the top and bottom panel for reducing dust accumulation into case. Easy to remove dust filter to wash/clean

Apevia RAPTOR500W Raptor 500W ATX Power Supply With 120MM Black Fan. | Connectors:1 x 20/24pin Main Power, 1 x 8pin (4+4pin) CPU 12V, 3 x SATA, 3 x Molex, 1 x 6+2-pin PCI-express, 1 x Floppy | 1 x Auto-Thermally Controlled Red 120mm Fan (No LED). 115/230V Switch. Max. Output Current +3.3V(16A), +5V(16A), +12V(36A), -12V(0.3A), +5Vsb(2.5A) | Safety Protections. Standard ATX Size: 5.9" x 5.5" x 3.4" (L x W x H) | NOTE: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on. | NOTE: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector. | NOTE: The 8pin PCI-E GPU connector can be split apart to become a 6+2 connector by pushing one end of the 6pin down and the other end of the 2pin up for graphics cards that require a 6pin power connector. | NOTE: The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power.

APEVIA SFX-AP400W Mini ITX Solution / Micro ATX / SFX 400W Power Supply | Cooling: 1 x 80mm Automatically Thermal Sensing Fan. All Cables are Sleeved | Connectors: 1 x 20+4pin Main Power, 1 x 4pin 12V(P4), 1 x 6/8pin PCIe, 2 x SATA, 2 x 4pin Molex, 1 x 4pin Floppy | Output: +3.3V@12A, +5V@12A, +12V@28A, [email protected], [email protected] | Dimension: 125mm x 100mm x 63.5mm (4.92" x 3.94" x 2.5") - L x W x H

Apevia 500W SFX Power Supply | Another view of the power supply | High stability with 5% tolerance of 5V, 3.3V & 12V output | Look at the label

Apevia 600W Spirit ATX Gaming Power Supply with black sandblasted casing | Supports Dual/Quad/Multi-core CPUs. Supports single 12V output for higher power usage. | Connectors : 1 x 20/24pin Main Power, 1 x 4+4pin 12V, 2 x PCI 6+2pin, 4 x SATA, 4 x Peripheral, 1 x Floppy | Auto-thermally controlled 120mm black fan. Output: +3.3V@16A, +5V@20A, +12V@45A, [email protected], [email protected] | Heavy-duty protections: Short-Circuit/Over-Current/Over-Voltage/Over-Power/Under-Voltage/Over-Temperature Protections

Apevia Venus 450W ATX Power Supply. | Connectors:1 x 20/24pin Main Power, 1 x 8pin (4+4pin) 12V, 3 x SATA, 3 x Peripheral | Auto-Thermally Controlled Black 120mm Fan. 115/230V Switch. 5% Tolerance of 5V, 3.3V & 12V Output | IMPORTANT: The power supply will not power on simply by connecting the power cord to both the power supply and wall outlet. Ensure that all the power supply cables are properly connected to the PC for it to power on. | IMPORTANT: The 8pin CPU connector can be split apart to become a 4+4 connector by pushing one end of the 4pin down and the other end of the 4pin up for motherboards that require a 4pin power connector. | IMPORTANT: The 24pin motherboard connector can be split apart to become a 20+4 connector by pushing one end of the 20pin down and the other end of the 4pin up for motherboards that require a 20pin power connector.