Output Power: DC 5V 2.4A 12watts Max., full IEEE 802.3af compliant. | Input Power Voltage: DC 44-56V | Data Rate: 100/100Mbps; DC Jack: Micro USB | Available with Tablets, Dropcam or Raspberry Pi, IPC, IP Camera and more | Package content: 2x PoE splitter

Rated Voltage: 24V DC, Current: 0.06A | Bearing Type: Dual Ball Bearings, low noise, long life:50000H | Airflow: 5.07CFM, Air Pressure: 2.45mmAq, Speed: 6000PRM, Noise: 23.20dBA | Lead Wire: fit in 2-PIN-2.5mm connector, length: 150mm / 5.90inch, Dimension: 40mm x 40mm x 10mm | Warranty: 2-years, Package: 2x 24V DC brushless fans

Output Power: DC 5V 2.4A 12watts Max., full IEEE 802.3af compliant. | Input Power Voltage: DC 44-56V | Data Rate: 100/100Mbps; DC Jack: Micro USB | Available with Tablets, Dropcam or Raspberry Pi, IPC, IP Camera and more | Package content: 4x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug USB Type C ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V gigabit PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug USB Type C ), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input, please note: this spitter is only compatible with 10/100Mbps Non-PoE devices, it DOES NOT support gigabit Non-PoE devices | WARRANTY: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max. | Main body is made of waterpoorf desgin (one-piece injector molding) | Data Rate: 10/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant | Available with IP camera, Voip phone, AP and other 12V Non-PoE devices | Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

Output Voltage: 5V/9V/12V DC adjustable voltage,up to 18-24watts | Data Rate: 100/100/1000Mbps, full IEEE 802.3af compliant,Deliver power up to about 328.1 feet(100 meters) | Input Voltage: DC 36-48V, Gigabit Ethernet network,Plug-and-Play | Works with IP camera,IP phone, AP and other 5v/9v/12v Non-POE devices, Require no configuration | Warranty: Two Years; Package content: 2x 5V/9V/12V PoE splitters

5V DC power output ( 2.4A / 12watts Max.), 10/100/1000Mbps ethernet data rate, IEEE 802.3af compliant | Input Power Voltage: DC44-56V from poe switch or poe injector, deliver power up to about 100m (328 feet) | Plug-and-Play - Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | Works with Raspberry Pi 3B+ and previous models / IP Camera / Tablets / Dropcam or other devices with 5V Micro USB input | 2-Years warranty and unlimited technical support, Package content: 2x PoE gigabit splitter

A great solution for PoE devices, the injector can be used to power PoE devices (built-in poe function or module) such as PoE IP Phone / IP cameras / Access Points etc | The poe injector is also works with non-poe devices, but a extra poe splitter will be required between this poe injector and non-poe devices | Plug and Play: provides remote power to equipment through CAT5/5e/6 Ethernet cable up to 1000Mbps, the device has a compact size makes it easy to install the adapter into areas where space is limited, without no configuration required | Hight Power: Input: AC100-240V 50/60Hz, Output: Data & Power (output voltage: 48V, output current: 0.8A, 1.0A max.), make it NOT ONLY works with IEEE 802.3af devices, BUT ALSO with high-power devices like 802.3at devices (more than 30 Watt), Such as IP PTZ camera, big power AP etc | Warranty: 2 years

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug USB Type C ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input | WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V gigabit PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., plug micro USB), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector, deliver power up to about 100m (328 feet) | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that have a 5V micro USB input and a ethernet input, such as IP camera, Tablets, Dropcam or Raspberry Pi and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices like Raspberry Pi 3B+ | WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V PoE splitter

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more. please note: this spitter is only compatible with 10/100Mbps non-PoE devices, it DOES NOT support gigabit non-PoE devices | WARRANTY: 2 years and unlimited technical support, Package content: 4x 5V PoE splitter

Input Power Voltage: DC 44-54V, Output Power: DC 12V 1-1.5A 18W Max. | Main body is made of waterpoorf desgin (one-piece injector molding) | Data Rate: 100/100Mbps; DC jack: 5.5*2.1mm, Full IEEE 802.3af compliant | Available with IP camera, Voip phone, AP and other 12V Non-PoE devices | Please make sure all connectors (DC, network port) are connected with waterproof method before outdoor use.

BNC to BNC extension cable, matched BNC connectors | Thin-line flexible cable with Black BNC male connectors for video audio signal transmission | Wire color: Black, BNC connector:Black | L=3.3ft/1m | Warranty: Two Years

OUTPUT: 5V DC power out (5V 2.4A 12watts Max., Plug 3.5mm x 1.35mm, 5.5mm x 2.1mm ), 10/100/1000Mbps ethernet data | INPUT: IEEE 802.3af (DC44-56V) from poe switch or poe injector | PLUG and PLAY: Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet | APPLICATION: works with non-PoE network devices that require a 5V dc input and a ethernet input, such as IP camera and more | WARRANTY: 2 years and unlimited technical support, Package content: 1x 5V PoE splitter

Output Voltage: 5V/9V/12V DC adjustable voltage, up to 18-24watts | Data Rate: 100/100/1000Mbps, full IEEE 802.3af compliant | Input Voltage: DC 36-48V, Gigabit (10/100/1000Mbps), Plug-and-Play | Works with IP camera, IP phone, AP and other 5v/9v/12v Non-POE devices, Require no configuration | Warranty: Two Years; Package content: 1x 5V/9V/12V PoE splitters