▶Reminders
1. Before ordering, please make sure that your car stereo is an android type or not, and check whether it has standard 16 pin iso power socket.
2. Recommend professional installation for aftermarket radio.

▶Features
●Widely applicable for most of android car radios
●Standard 16 pin power cable with the full labels
●USB adapters can works for phone/usb drive
●Cam-in cable for rearview camera video input
●GPS antenna will make your navi smoothly(according to radio system and internet)
●Easy to connect and replace old wire harnesses
●RCA adapter can use for subwoofer/car monitor/headrest/external microphone/car cameras

▶Wire Definitions

16 pin iso radio adapter connection
ACC: Connect to ignition switch (red cable)
B+ Batteries : To battery +12V (yellow cable)
GND : To battery negative B- (black cable)
+ILL : To illuminate backlight B+
Reversing/Back wire: To backup camera detection wire (Marked as Reverse or Back)
SW1 KEY1 : To steering wheel line 1
SWC KEY2 : To steering wheel line 2
ANT : To auto antenna (blue cable)
Green wire: Left Rear Speaker (+)
Green and Black wire: Left Rear Speaker (-)
White wire: Left Front Speaker (+)
White and Black wire: Left Front Speaker (-)
Purple wire: Right Rear Speaker (+)
Purple and Black wire: Right Rear Speaker (-)
Gray wire: Right Front Speaker (+)
Gray and Black wire: Right Front Speaker (-)

20 pin rca harness connection
Audio Out R - Red Plug
Audio Out L - White Plug
Aux In R - Red Plug
Aux In L - White Plug
Video Out - Yellow Plug
CVBS-IN-1 - Yellow Plug
Subwoofer - Green Plug
Mic - Black Plug
AMP CONT - Blue Wire

▶Specification
Application: most 1din/2din android car radio
Power harness length: 7.8''
USB cable length: 29.5''
GPS adapter length: 62.9''
RCA cable length: 7.8''
CAM-in wire: 7.48''
Product Weight: 0.15kg

▶Package List
1x 16pin stereo wiring harness
1x 20pin android radio rca adapter
1x 4pin usb cable
1x 6pin usb cable
1x gps antenna
1x backup camera video input wire