Manufactured from individual copper strands and tinned to perform in the harshest marine environments. | Ultra-flexible Type 3 stranding resists fatigue from vibration and provides added corrosion protection. | Exceeds all UL 1426, US Coast Guard Charter boat (CFR title 46) and ABYC standards | The premium vinyl insulation is rated at 600 volts, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold (-40 deg F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation.

3/8" Screw, 16-14 AWG, 25 Pack of Heat Shrink Ring Terminals | Heat activated adhesive built into the sleeve of the heat shrink tubing | Shrinks to form a water tight seal and the ultimate vibration and strain relief. | Tinned for corrosion resistance, Pure copper for maximum current flow | UL listed and CSA recognized

5/16" Screw, 12-10 AWG, 100 Pack of Heat Shrink Ring Terminals | Heat activated adhesive built into the sleeve of the heat shrink tubing | Shrinks to form a water tight seal and the ultimate vibration and strain relief. | Tinned for corrosion resistance, Pure copper for maximum current flow | UL listed and CSA recognized

Tinned for corrosion resistance | Pure Copper for maximum current flow | Heat activated adhesive built into the sleeve of the heat shrink tubing. Brazed seam for maximum strength | Shrinks to form a water tight seal and the ultimate vibration and strain relief | Ul listed and csa recognized

250 Feet of Tan 12 AWG marine grade wire | Package Dimensions: 16.6 H x 12.1 L x 16.3 W (centimetres) | Package Weight: 3.323 kilograms | Country of Origin : United States

Launched in the year 2003 | Classified as a woody musk | Recommended for casual wear

1000 Feet of Black 14 AWG marine grade wire | Manufactured from individual copper strands and tinned to perform in the harshest marine environments | Ultra-flexible Type 3 stranding resists fatigue from vibration and provides added corrosion protection | Exceeds all UL 1426, US Coast Guard Charter boat (CFR title 46) and ABYC standards | They are constructed with premium vinyl insulation that is rated at 600 volts, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold (-40 deg F/C) and resists salt water, battery acid, oil, gasoline, heat, abrasion and ultra-violet radiation

Male NMEA 2000 Field Serviceable Connector | For termination of bare NMEA cable | Securely terminate bulk cable, or replace a broken end | Packaging Dimensions : 4.875 inches X 2.875 inches x 0.875 inches

Amcor's NMEA 2000 Power Isolator can be used for isolating power between 2 independent NMEA 2000 networks | Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks | The yellow couplers connect to the corresponding Amcor backbone cables and tees creating a simplified, color coded network installation | Color coded for easy installation and component identification | Compatible with all NMEA 2000 micro devices

NMEA 2000 Single Device Backbone Starter Kit | Basic starter kit for adding a new NMEA 2000 network to your boat | (1) Power Cable with Tee, (1) Male Terminator, (1) Female Terminator, (1) Single Tee Connector, (1) Drop Cable, (1) Backbone Cable | Package Dimensions : 7.75 " L X 6.875 " W X 3.0 " H