Power Cable for Blackmagic pocket cinema camera 4k | This cable works with 12V Anton Bauer Gold Plates, V-mount Plates, DC 5.5X2.5MM outputs, NP-F970 12V battery plate. Works for: BMPCC4K BMPCC 4K Blackmagic Pocket Cinema Camera 4K | Cable length：Min length 15.7 inches,Max length 39 inches | The 2 pin connector is a push-pull self-locking connector. It will automatically lock when inserted into the camera. It is impossible to pop off. You should pinch the top of the 2 pin connector, which will easily pull it out, rather than pull out by pinching directly the cable or the bottom of the connector.

Power your Red Komodo-X/ Scarlet/ Epic Camera with battery that with D-tap power output plug. | Plug A: D-tap Male. | Plug B: Straight 1B 6 Pin (4+2) Female. | Cable Length:50cm (about 20in) in stock. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power your RED Komodo-x, RED DSMC2, Red Scarlet & Epic camera with battery that with D-tap power output plug. | Reminder: This cable is not compatible for RED Komodo and RED V-vaptor XL. | Plug A: Standard D-Tap Male; Plug B: Right Angle 1B 6 Pin Female. | Cable Length: 1M/39.4in. We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Fully compatible with Red EVF and touchscreen LCD. | Works with Red Epic, Red Scarlet, and Red One cameras. | Plug A: Right Angle 16 Pin Male; Plug B: Straight 16 Pin Male. | Cable Length:19.7in (about 50cm) in stock. We can customize cables with other length, please send a message to us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | Power your Red Scarlet & Epic camera with battery that with D-tap power output plug. | Cable Length: 27.5 inches, Stretchable Length: 51 inches. We can customize cables with other length, please send a message to us if you need. | Plug A: Standard male D-Tap. | Plug B: Right Angle Female 6pin 1B.

It will power Smallhd monitors, teradek from 2 pin output on Red-Komodo V-Mount battery plate. | Plug A: Alvin's Rotatable right angle 2-pin male connector. | Plug B: Alvin's Rotatable right angle 2-pin male connector. | Cable Length: 18 inches (45cm). We can customize the cable length to meet your requirements. Note: If you need other length cable, please send us a message before placing order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Work for Teradek Bond/ SmallHD Monitor. | Plug A: Standard male D-Tap. | Plug B: Right Angle 2 pin 0B male connector. | Cable Length: 12 inches; Stretchable Length: 36 inches. | Every item will be sold until they were tested and turned out to be no short circuit, no latent breakdown problems. If the cable you received is defective, please contact us immediately.

For SmallHD 702 monitor, Atomos Ninja V, Atomos Shogun, Lectrosonics venue VR IFB, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Hollyland Mars 400s. | Plug A: Right Angle DC Male. | Plug B: Right Angle Locking DC, be compatible with 5.5*2.1mm or 5.5*2.5mm. | Cable Length: 45cm(17.7inches). We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Super flexible and thin 3G HD SDI Cable, 75 Ohm RG179 | For Sony FS5/FS7/FX6, Atomos Ninja/Shogun Inferno monitor, Blackmagic Ursa Mini Pro. | Connector type: Right angle BNC male to Right angle BNC male. | Cable Length: 30CM(About 12 inches) . We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

To feed timecode signal from a Tentacle Sync or Deity TC-1 to cameras and devices (for Canon C70/C300 MK II/ C300 MK III/ C500, Sony F55/ FX9/ FX6 cameras, Zaxcom, Zoom F4/ F8/ F8n/ F8n Pro, Sound Devices, Blackmagic Ursa Mini, JVC broadcast cameras, for Panasonic broadcast cameras.) | Bi-Directional Timecode Cable, also feeds timecode out from BNC to 3.5mm TRS | Plug A: Right angle 3.5mm TRS. Plug B: Right angle BNC. | Cable Length:50cm (about 20 inches) in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

This cable is with special custom design right angle 5 pin connector, which can be rotated at any 90 degrees directions (Default 12 o'clock up direction). | Cable to feed timecode from Tentacle Sync 3.5mm to ARRI Alexa or Sound Devices Recorder that uses a standard 5pin connector. | You need this cable if you want jam-sync Tentacle into devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a 5pin connector (If you need the other cable that from ARRI Alexa or Sound Devices Recorder into Tentacle Sync, please contact me or visit my store. ) | Plug A:High quality special rotatable 5 pin connector. Plug B:High quality right angle 3.5mm mini-TRS jack. | Cable Length:18 inches (45 cm) length. We can customize other length, please send a message to us if you need.

This cable feeds timecode from Tentacle Sync to ARRI Alexa or Sound Devices Recorder that uses a standard 5pin connector. | You need this cable if you want jam-sync Tentacle into devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a 5pin connector (If you need the other cable that from ARRI Alexa or Sound Devices Recorder into Tentacle Sync, please contact me or visit my store. ) | Plug A:High quality right angle 3.5mm mini-TRS jack | Plug B:High quality 5-pin connector | Cable Length:45CM, We can customize cables with other length, please send a message to us if you need.

This bidirectional timecode cable is designed to feed timecode from Tentacle Sync timecode generator to Canon EOS R5C camera, or feed timecode from Atomos UltraSync ONE to devices which has a 3.5mm TRS input. | The cable is more flexible and thinner. | Plug A: Straight DIN 1.0/2.3 Male. Plug B: Right Angle 3.5mm TRS Jack. | Cable Length: 30cm(12inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

More flexible than normal cables. | Power Teradek Bond via ARRI Alexa Camera. | Plug A: Right Angle 2 Pin Male Connector; Plug B: 2 Pin Male Connector. | Cable Length: 19.7inches (50cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

This 2-Pin to AC Adapter Cable from Teradek is a 2 meters power cable designed for using with the Z Cam E2 S6 F6 F8, Teradek Cube, Bolt, Bond, Link, Hollyland Cosmo 600 and Z CAM E2 Flagship ( E2-F6, E2-S6, E2-F8 ). | We only use highly reliable and safe chips in our adapters to protect your devices, insteading of using low-quality chips to reduce costs.The adapter quality is better than the Standard. | With 4 plugs ( US, UK, EU, AU ), you can change it easily by yourself. Right angle 2 pin on the other side. | Cable Length: 79 inches (2 meters). Please Note, we have extended the length from 1.2 meters to more than 2 meters, the length is long enough now.We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

TIME CODE cable for your Red. | Plug A: 00 4pin Male Connector. | Plug B: BNC Connector. | Cable Length:50cm in stock. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

For Canon R5C to connect Deity TC-1 Timecode Cable. | The DIN connector is longer than normal version and of higher quality, which is specially for Canon R5C camera and easier to pull out. | Plug A: Straight DIN male; Plug B: Lock Right Angle 3.5mm TRS. | Cable Length: 30cm (12 inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Feed timecode for Canon EOS R5C camera from Deity timecode box or Tentacle Sync Timecode Generator. | Plug A: Straight Lock 3.5mm TRS | Plug B: Right angle DIN 1.0/2.3 mini BNC | Cable Length: 30cm(12inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Cable to feed timecode from Tentacle Sync to ARRI Alexa or Sound Devices Recorder that uses a standard 5pin connector. | You need this cable if you want jam-sync Tentacle into devices like ARRI Alexa or Sound Devices 702T / 744T / 788T / 664 / 633 or others that using a LEMO 5pin connector (If you need the other cable that from ARRI Alexa or Sound Devices Recorder into Tentacle Sync, please contact us or seach in my store. ) | Plug A: High quality L shape Neutrik 3.5mm mini TRS ; Plug B:High quality 5 pin male connector. | Cable Length:50cm (19.7 in). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us at once if the cable doesn't work. We will solve the problems properly or send you a new replacement.

The twisted cable serves for power supply and control. It features a Right Angle Hirose 6pin (HR 10A-7P-6S) plug on one end, and is available in 1~10 meter variants. | Cable Length: 33 feet (10 meters). We can customize cables with other length, if you need custom cables, please send a message to us before making the order | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. | Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us. | The Alexa Mini's 5-pin 00 Series jack on the camera body to allow direct connection to microphones, lav packs, and other audio equipment.Works with ALEXA MINI Camera. | Cable Length:70cm (about 27.6in) in stock (Better than before). We can customize cables with other length, please send a message to us if you need. | Plug A: Two XLR 3pin Female. | Plug B: Right Angle 5pin Male.

This Regulated USB C to Dtap Cable allows you to power Blackmagic Design Micro Converter, Sound Devices Mix Pre-3 II, Sound Devices Mix Pre-6 II from V-mount battery or other devices with dtap output. | This cable also works for other 5V device with USB-C Type-C connector, such as Mobile Smart phones, laptops, LED lights, Monitor and so on. | Power output: Regulated 5V/2A. Built-in DC-DC current electronic stabilizer to protect your device, providing safe and stable connection. | Plug A: Right Angle USB-C Type-C Connector; Plug B: D-tap Male Connector. | Cable Length: 12inches (30cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

This is for the Z Cam E2 S6/F6 Cameras and you can use a V Mount to power it up. Right angle 2 pin male connector on one end, with AlvinTap on the one end. | AlvinTap (Protective DTap): It can prevent your device from short circuits caused by reverse insertion or using an incompatible cable, which will avoid damaging your device. Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. When D-tap is inserted correctly, green light is always on, which means power on. When reverse insertion, power will be cut and the red light will flicker. | Cable Length:12 inches (About 30cm).Custom Length: other length of the cables, we can customize with it, please contact us. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. | Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Plug A: Right angle BNC Male. | Plug B: Straight BNC Male. | Min length:38cm/14 inches; Max length:78cm/30inches. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Super flexible and thin 3G HD SDI Cable, 75 Ohm | For Blackmagic BMCC Video Camera. Be able to transfer 4K from Sony FS5 to Atomos Shogun Inferno. | Connector type: Right angle BNC male to Straight BNC male. | Cable Length:30CM. We can customize cables with other length, please contact us if you need. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us.

For Canon R5C. It does not support 8K 60P auto focus, but support 8K 30P auto focus. Please note that do not use this dummy battery on the SmallHD or Blackmagic camera, do not use it for the others that we do not mention. (About the other details, welcome to contact us) | Plug A: E6 Dummy Battery (DR E6); Plug B: D-tap. | Please ensure that the output of the power source does not exceed 16.8V. The output is about 8V. Please follow the below installation steps, which is better for your device and dummy battery cable: Firstly plug the D-Tap into the battery, then load the dummy battery into the battery compartment, and finally turn on your device. | Min Length: 30cm(12inches). Max Length: 1m(39.4inches). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

With this cable, you can power Canon 5D mark II 7D 60D from the 12v 2pin output on Arri Alexa XT. | It is for Canon 5D mark II 7D 60D. | Plug A: Lanparte LP E6 Dummy Battery; Plug B: Rotatable Right Angle 0B 2 Pin Male. | Alvin's Rotatable Right Angle Plug can be rotated at any 45 degrees to meet a variety of wiring needs. Please note, before rotating, you need to unlock the nut first, if you don't know how to do, please contact us. | Cable Length: 20 inches (50cm). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.

This cable is designed for powering Teradek Bond| SmallHD Monitor from any standard 0B 2 pin(pin1 GND, pin2+) power output socket. And it is more flexible and softer than regular version, making it easier to adapt the cable to device layouts. | It is with special custom design Alvin's Rotatable Right Angle 2 pin connector, which can be rotated at any directions (0/45/90/135/180/225/270/315 degrees direction), default 3 o'clock direction (45 degrees). Please note, if you want to rotate it, please unlock the nut first, then you can rotate it, if you don't know how to do, please contact us. | Plug A: Rotatable Right Angle 2 Pin Male. Plug B: Straight 2 Pin Male. | Cable Length: 45cm|18 inches. We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This cable is specially designed for the Blackmagic Pocket Cinema Camera 4K 6K camera (need to plug in DC 8V interface hole), to increase shoot time and to reduce battery charging downtime. | There are two DC output ports whose output voltage are respectively 8V and 12V, allowing you to use for other devices, such as video monitors, LED lights, etc. Please ensure to use the correct rated voltage and current of the electrical equipment. | With a 1/4" manual screw and hot shoe mount, you can easily install the battery plate on your camera or other device. There is a power switch to control, please turn off it when the temparature is too high. | What's in the package: NP-F battery plate×1, Min length 12 inches BMPCC-DC cable×1,12 inches DC-DC cable×1, 1/4” hot shoe mount×1（Fix the battery plate on the device）. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Power Cable for Arri|RED|Steadicam Rigs|Z CAM E2 Flagship E2-S6 E2-F6 E2-F8 Camera to Tilta Nucleus M | Plug A: Straight 2 Pin Male. | Plug B: Nucleus Straight 7 Pin Male. | Cable Length: 15 Inches/38cm (Maximun length: 39in/1m). We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

This is a SDI-Port-Protection-Cable to prevent users from damaging the SDI port due to incorrect operational procedures. | Plug A: Original BNC Male. Plug B: Right Angle BNC Female with SDI Protector. | Please note, that SDI isolators can reduce signal quality and/or maximum cable length. This cable is transmitted via frenquency, which can block the current of the shielding layer, and protect against SDI damage. And generally, when the signal is reduced, it can be used transmitted in 2K|1080p, and cannot be used for transmission in 4K/8K . | Color: Red. Cable length: 8inches/ 20cm. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.

Power the Z CAM EVF through the 12V 2 Pin Aux . Also for Teradek Bond| ARRI Alexa Camera| SmallHD 702 Bright (SmallHD's Faux LP-E6 Adapter) from any standard 0B 2 pin power output socket. | This cable is with special custom design Alvin's Rotatable Right Angle 2 pin connector, which can be rotated at any directions (0/45/90/135/180/225/270/315 degrees direction), default 9 o'clock direction (270 degrees).Please note,if you want to rotatate it, please unlock the nut first, then you can rotate it, if you don't know how to do, please cotnact us. | Plug A: Right Angle Rotatable 2 Pin male connector. Plug B: Standard Right Angle 2 Pin male connector. | Cable Length: 30cm (about 12 inches). We can customize cables with other length, if you need custom cables, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn’t work. We will solve the problems properly or send you a new replacement at once.

Feed timecode to Tentacle Sync from Sound Devices Recorder using standard 0B 5-pin connector.(The signal direction to flow from the 5-pin to the 1/8" TRS) | It is compatible with ARRI Alexa or Sound Devices 888/ 702T/ 744T/ 788T/ 664/ 633 or other devices that using a 5 pin connector into jam-sync Tentacle. (Please don't use it for other devices that we have not mentioned before contacting us for confirmation, thank you.) | Plug A: Right Angle 3.5mm TRS; Plug B: Right Angle 0B 5 Pin Male (better fit the bag). | Cable Length: 15cm (6inches). We can customize cables with other length, please send a message to us before making the order. | Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once.